Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Planar dual-band bandpass filter with regular harmonic suppression

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Tri-Section Stepped Impedance Bandpass Filter with Harmonic Suppression

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

New Microstrip Bandpass Filters with Increased Upper Rejection Band

Microstrip bandpass filters using stepped-impedance ring resonators for harmonic suppression

High-Selectivity Bandpass Filter With Wide Upper Stopband Using Harmonic Suppression Structure

A Frequency-Tunable High-Selectivity Dual-Band Bandpass Filter with Independently Controllable Passbands

Compact Fourth/third Order Dual‐band Bandpass Filter with Independently Controllable Passbands

A Novel Dual-Mode Square Loop Passband Filter with Second Spurious Passband Suppression

Design of a Bandpass Filter Using Hybrid Planar Waveguide Resonator and Stepped-Impedance Resonators

A dual-wideband bandpass filter with closely spaced passbands using coupled lines and shunt transmission lines loaded with end-connected coupled lines

Dual-band bandpass filter derived from the transformation of a single-band bandpass filter

A Hybrid Transmission-Line/SAW-Resonator Analog Signal-Interference Dual-Band Bandpass Filter

Design of a high-selectivity quad-band bandpass filter based on λ/4 resonators with alternative J/K inverters

A Novel Dual-Band Bandpass E-plane Filter Using Compact Resonators

Dual-Band Bandpass Filter with Ultra-Wide Upper Stopband Using Slow-Wave Dual-Resonance Cells

Dual-Band Stepped-Impedance Band-Pass Filter