Abstract:Controlled polymerization is of great significance for the tailoring of macromolecular structure and synthesis of polymers with excellent properties. Several non-toxic organic guanidinines were prepared/selected in our laboratory in recent years and used as the catalysts/initiators to realize controlled melt polycondensation (MP), ring-opening polymerization (ROP), and depolymerization (DEP). Isotactic melt polycondensation (Iso-MP) of L-lactic acid/D-lactic acid (LLa/DLa) was carried out for the first time with biogenic creatinine (CR) catalyst and poly(L-lactic acid)/poly(D-lactic acid) (PLLA/PDLA) with high isotacticity (Iso. > 98%) was obtained; Combined MP with solid-state polycondensation (MP-SSP) of the medium molecular weight PLLA/PDLA (M-W = 2.2 x 10(4) Iso. = 98.2%), prepared by the Iso-MP with CR, was carried out, and high molecular weight PLLA/PDLA (M-W > 1.0 x 10(5)) with high isotacticity (Iso. > 98%) was obtained. The initial decomposition temperature (T-d,T-i) of the synthesized PLLA reached up to 324.5 degrees C, which was 120 degrees C higher than that of PLLA synthesized by SnCl2 center dot 2H(2)O catalyst; Optical pure (e.e. 100%) L-lactide/D-lactide (OP-LLA/OP-DLA) were synthesized via Iso-MP and the subsequent depolymerization (DEP) of LMW-PLLA/LMW-PDLA (M-W = 8.0 x 10(2)- 9.0 x 10(2)) with CR catalyst. The polymer residues (r-PLLA/r-PDLA), produced accompanying with the lactides formation, were reused as the raw material for LLA/DLA synthesis after being hydrolyzed. The total yield of OP-LLA/OP-DLA reached up to 98%; Several sterically hindered guanidine carboxylates (HBG.OAc, CRA, CRG, CRL, TBDA) were synthesized and used to realize living ROP of LLA. An optical pure morpholine-2,5-dione (3S,6S-BMMD), derived from LLa and L-serine, was synthesized. Living ROP of 3S,6S-BMMD was carried out with CRA catalyst for the first time. After debenzylation of the synthesized P(3S,6S-BMMD), an amphiphillic copolymer P(LLa-co-Ser) was obtained, which is a useful support material in biomedical areas. The fine molecular structures and isotacticities of growing polymeric species were characterized by in situ monitoring with H-1-NMR, C-13-NMR. And the mechanisms of the above mentioned controlled polymerizations were proposed.

Controlled Synthesis of a Multi-block Copolymer Poly(L-lactic acid)-co-Poly(butylene succinate) with Creatinine-based Guanidine Catalysts

Poly(L-Lactic Acid)-Block-Poly(Butylene Succinate-Co-Butylene Adipate) Multiblock Copolymers: from Synthesis to Thermo-Mechanical Properties

Construction of Polylactide-block-Polystyrene Copolymer by Orthogonal ROP and O-ATRP via Bifunctional beta-Diiminate Zinc Catalyst

Nucleating Agent-Containing P(Lla-Mb-Bsa) Multi-Block Copolymers with Balanced Mechanical Properties

Amphiphilic Block Copolymers Based on Methoxy Poly(ethylene Glycol) and Either Crystalline or Amorphous Poly(caprolactone‐b‐lactide): Synthesis, Solid‐state and Aqueous Solution Characterizations

Synthesis of Block Cationic Polyacrylamide Precursors Using an Aqueous RAFT Dispersion Polymerization.

Controlled Synthesis of PLA-series Environment-friendly Polymers with Guanidine Catalysts

One-pot Synthesis of Octablock Copolymers of High-Molecular Weight Via RAFT Emulsion Polymerization

Synthesis of High Molecular Weight Poly(L-Lactic Acid) and Poly(D-Lactic Acid) with Improved Thermal Stability Via Melt/Solid Polycondensation Catalyzed by Biogenic Creatinine

Multiblock Poly‐ε‐Caprolactones: One‐Step Synthesis Toward Programmable Properties

STUDY ON THE FACTORS FOR IMPROVING MOLECULAR WEIGHT OF BIODEGRADABLE POLY(BUTYLENES SUCCINATE)(PBS)

Synthesis Of Polypeptoid-Polycaprolactone-Polytetrahydrofuran Heterograft Molecular Polymer Brushes Via A Combination Of Janus Polymerization And Romp

Isotactic Polycondensation of L-Lactic Acid with Biogenic Creatinine

Enhanced Crystallization Rate and Mechanical Properties of Poly(l‐lactic Acid) by Stereocomplexation with Four‐armed Poly(ϵ‐caprolactone)‐block‐poly(d‐lactic Acid) Diblock Copolymer

Process method for synthesizing medical biodegradable polylactic acid by polycondensation of lactic acid in presence of creatinine catalyst

One-Step Chemoenzymatic Synthesis of Poly(Epsilon-Caprolactone-Block-Methyl Methacrylate) in Supercritical Co2

Multiblock Poly‐ε‐caprolactones: One‐step Synthesis Towards Programmable Properties

Synthesis of Poly ( Methyl Methacrylate ) -Poly ( Lactic Acid) -Poly (methyl Methacrylate) Tri-Block Copolymer

Synthesis of Multiblock Copolymer Composed of Biodegradable Poly(butylene succinate) and Poly(2-pyrrolidone): Impact of Each Block Length on the Mechanical Properties

Highly efficient one-pot/one-step synthesis of multiblock copolymers from three-component polymerization of carbon dioxide, epoxide and lactone

Organic guanidine catalysis melt/solid polycondensation synthesis of poly(butylene adipate-co-terephthalate)