Abstract:Lithium sulfur battery (Li-S) has attracted intensive interest in recent years due to its high specific capacity, low cost, and abundant resources of sulfur. Theoretically, a high specific capacity of 1675 mAh g-1 and a specific energy of 2567 Wh kg-1 are expected for sulfur cathode. Practically, the energy density of Li-S battery is projected to be two to three times higher than that of state-of-the-art Li-ion batteries (180 Wh kg-1). However, the commercial applications of Li-S batteries are still hindered by several challenges.2 One is that with elevated sulfur loading above 3 mg/cm2, which is essential for high energy applications, new problems occur including the cathode cracking, electrode wetting and low sulfur utilization rate. The second and more detrimental issue that limits Li-S cell performance is interfacial stability and cycling reversibility of lithium metal anode, which easily reacts with both electrolyte solvents and the formed polysulfides during battery cycling and leads to unavoidable shuttle and continuous consumption of active sulfur species. These side reactions are significantly exacerbated under conditions of coupling with high-areal loading sulfur cathode and/or cycled at elevated current densities. As a result, thick and porous interface will be quickly built up on lithium anode and leads to quick impedance increase and thus fast capacity decay of the battery.3 The third problem is the amount of electrolyte required for full dissolution of the polysulfides. The dissolved polysulfides cause endless shuttle and continuous Li anode corrosion due to the lack of effective solid electrolyte interface (SEI) on lithium. In addition, the large amount of electrolyte significantly lowers the energy density of the battery, which is undesired for high-efficient portable devices or electric vehicle energy storage applications To overcome the aforementioned hurdles in Li-S batteries, multiple approaches have been proposed and successfully demonstrated by our group, spanning from sulfur cathode, anode and electrolyte. At the meeting, we will present our recent progresses on the Li-S battery system including the rational design of carbon/sulfur composite for large area and high loading sulfur cathode preparation, alternative non-Li anode materials for Li-ion sulfur batteries, and development of new electrolyte. References 1. Ji X, Lee KT, Nazar LF. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. Nat Mater 2009, 8(6): 500-506. 2. Lv D, Zheng J, Li Q, Xie X, Ferrara S, Nie Z, et al. High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes. Advanced Energy Materials 2015, 5,1402290. 3. Lv D, Shao Y, Lozano T, Bennett WD, Graff GL, Polzin B, et al. Failure Mechanism for Fast-Charged Lithium Metal Batteries with Liquid Electrolytes. Advanced Energy Materials 2015, 5,1400993.

Activating Li2S As the Lithium-Containing Cathode in Lithium–Sulfur Batteries

Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries.

Li2S Cathodes in Lithium–Sulfur Batteries

A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides Via Solid-Phase Lithium-Sulfur Transformation

Lithium Sulfide Batteries: Addressing the Kinetic Barriers and High First Charge Overpotential

Activation of Bulk Li2S as Cathode Material for Lithium-Sulfur Batteries through Organochalcogenide-Based Redox Mediation Chemistry.

Co‐recrystallization Induced Self‐catalytic Li2S Cathode Fully Interfaced with Sulfide Catalyst Toward a High‐performance Lithium‐free Sulfur Battery

Sulfone-assisted-NH4I As Electrolyte Additive with Synergistic Dissolution and Catalysis Effects on Reducing the Activation Voltage of Li2S Cathode

An Efficient Li 2 S-based Lithium-ion Sulfur Battery Realized by a Bifunctional Electrolyte Additive

Routes to Electrochemically Stable Sulfur Cathodes for Practical Li–S Batteries

Catalytic Oxidation of Li 2 S on the Surface of Metal Sulfides for Li−S Batteries

Promoting the Transformation of Li 2 S 2 to Li 2 S : Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li – S Batteries

Lithium Sulfide As Cathode Materials for Lithium-Ion Batteries: Advances and Challenges

Lithium-Sulfur Batteries: High Loading Cathode, New Electrolyte and Non-Lithium Metal Anode

Lowered Activation Potential of Lithium Sulfide Cathode Material Aided by Electrolyte Additive

Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries

Promoting the Transformation of Li2S2 to Li2S: Significantly Increasing Utilization of Active Materials for High‐Sulfur‐Loading Li–S Batteries

Activation of Li2S Cathode by an Organoselenide Salt Mediator for All‐Solid‐State Lithium–Sulfur Batteries

Promoting the Transformation of Li2 S2 to Li2 S: Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li-S Batteries

Recent Advances in Cathode Materials for Rechargeable Lithium–sulfur Batteries

Single-Atom Electrocatalysts for Lithium Sulfur Batteries: Progress, Opportunities, and Challenges