Abstract:Structural colors, resulting from the interaction of light with nanostructured materials rather than pigments, present a promising avenue for diverse applications ranging from ink-free printing to optical anti-counterfeiting. Achieving structural colors with high purity and brightness over large areas and at low costs is beneficial for many practical applications, but still remains a challenge for current designs. Here, we introduce a novel approach to realizing large-scale structural colors in layered thin film structures that are characterized by both high brightness and purity. Unlike conventional designs relying on single Fabry–Pérot cavity resonance, our method leverages coupled resonance between adjacent cavities to achieve sharp and intense transmission peaks with significantly suppressed sideband intensity. We demonstrate this approach by designing and experimentally validating transmission-type red, green, and blue colors using an Ag/SiO 2 /Ag/SiO 2 /Ag configuration on fused silica substrate. The measured spectra exhibit narrow resonant linewidths (full width at half maximum ∼60 nm), high peak efficiencies (>40 %), and well-suppressed sideband intensities (∼0 %). In addition, the generated color can be easily tuned by adjusting the thickness of SiO 2 layer, and the associated color gamut coverage shows a wider range than many existing standards. Moreover, the proposed design method is versatile and compatible with various choices of dielectric and metallic layers. For instance, we demonstrate the production of angle-robust structural colors by utilizing high-index Ta 2 O 5 as the dielectric layer. Finally, we showcase a series of printed color images based on the proposed structures. The coupled-cavity-resonance architecture presented here successfully mitigates the trade-off between color brightness and purity in conventional layered thin film structures and provides a novel and cost-effective route towards the realization of large-scale and high-performance structural colors.

Dual-Layer Nanofilms Via Mussel-Inspiration and Silication for Non-Iridescent Structural Color Spectrum in Flexible Displays

Non-iridescent, Crack-Free, Conductive Structural Colors Enhanced by Flexible Nanosheets of Reduced Graphene Oxide

A new scalable-up approach to non-iridescent structural blue films with relatively high tensile properties via RAFT emulsion polymerization

Large-Scale and Wide-Gamut Coloration at the Diffraction Limit in Flexible, Self-Assembled Hierarchical Nanomaterials

Structural Colors by Synergistic Birefringence and Surface Plasmon Resonance

Wide Gamut, Angle-Insensitive Structural Colors Based on Deep-Subwavelength Bilayer Media

Iridescence-controlled and flexibly tunable retroreflective structural color film for smart displays.

Non-iridescent structural color patterns with robust mechanical properties produced by two-step photopolymerization

Facile Fabrication Of Amorphous Photonic Structures With Non-Iridescent And Highly-Stable Structural Color On Textile Substrates

Preparation of Janus Structural Color Sheets with Flexibility, Stability and Low Angle Dependence Based on Textile

Large-Area Fabrication of Structurally Colored and Humidity Sensitive Composite Nanofilm via Ultrasonic Spray-Coating

Highly Flexible and Reversible Stimuli-Responsive Photonic Crystal Film in Anti-Counterfeit, Detector, and Coating

Bio-inspired Janus structural color films as visually flexible electronics

Bioinspired Transparent Ultratough Birefringent Photonic Films with Engineerable Interference Colors Derived from In-Situ Synthesis of Caco 3

Structurally colored polymer films with narrow stop band, high angle-dependence and good mechanical robustness for trademark anti-counterfeiting

Large-scale high purity and brightness structural color generation in layered thin film structures via coupled cavity resonance

Biomimetic Structural Color Films with a Bilayer Inverse Heterostructure for Anticounterfeiting Applications.

Photonic Thin Films Assembled from Amphiphilic Cellulose Nanofibrils Displaying Iridescent Full-Colors

Non-iridescent and Wide-Color-Range Structural Coloration Enabled by Cellulose Nanocrystals with a Controlled Long-Range Photonic Structure and Helical Pitch

Fabrication and Characterization of Angle-Independent Structurally Colored Films Based on CdS@SiO2 Nanospheres.

Ultra-thin dual color rendering mechanism structural coloration film with freeze-resistant and self-cleaning properties