Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Surface Functionalization of TiO2 Nanoparticles Influences the Conductivity of Ionic Liquid-Based Composite Electrolytes

Electrochemical and Nanomechanical Properties of TiO 2 Ceramic Filler Li‐Ion Composite Gel Polymer Electrolytes for Li Metal Batteries

Surface NH 2 -Rich Nanoparticles: Solidifying Ionic-Liquid Electrolytes and Improving the Performance of Dye-Sensitized Solar Cells

Influence of TiO2 nano-particles on the transport properties of composite polymer electrolyte for lithium-ion batteries

Electrochemical Properties of a Mesoporous Si∕TiO[sub 2] Nanocomposite Film Anode for Lithium-Ion Batteries

Dispersibility of nano-TiO2on performance of composite polymer electrolytes for Li-ion batteries

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

Enhancing the ionic conductivity in a composite polymer electrolyte with ceramic nanoparticles anchored to charged polymer brushes

Synthesis and Electrochemical Performance of TiO<SUB>2</SUB>/C Nanocom-posites

Influence of Li concentration on structural, morphological and electrochemical properties of anatase-TiO2 nanoparticles

Electrolytic preparation of porous TiSi2/Si nanocomposites and the electrochemical performances as lithium-ion battery anode

Solvothermal Alcoholysis Synthesis of Hierarchically Porous TiO2-carbon Tubular Composites As High-Performance Anodes for Lithium-Ion Batteries

Dielectric polarization and relaxation processes of the lithium-ion conducting PEO/PVDF blend matrix-based electrolytes: effect of TiO2 nanofiller

The Effect of TiO2 Nanoparticles and the Liquid-Phase Therapy on the Resistance of the Interphase Lithium/Polymer Electrolyte with the Introduction of Ionic Liquid

Understanding Enhanced Ionic Conductivity in Composite Solid‐State Electrolyte in a Wide Frequency Range of 10 –2 –10 10 Hz

Structural, Morphological and Electrochemical Properties of Long Alkoxy-Functionalized Polythiophene and TiO2 Nanocomposites

Anodic Performance of Mesoporous Tio2-C Composites with Cu Nanopaticles Embedded for Lithium Ion Battery

Composite Sodium P-Toluenesulfonate/polypyrrole/tio2 Nanotubes/ti Anode for Sodium Ion Battery

Tio2-P4vp Nanocomposite Electrolyte For Dye-Sensitized Solar Cells

Synthesis and Electrochemical Performance of Nano-Sized Li4Ti5O12 with Double Surface Modification of Ti(III) and Carbon

In situ prepared nano-crystalline TiO2–poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries