Abstract:A dual-flexible manipulator with a telescopic arm is affected by joint flexibility, load flexibility, and bearing friction, which will cause angular velocity fluctuation. Besides, the motion of the telescopic arm leads to dynamic parameters of the flexible load in the servo system time-varying. The variation of dynamic parameters increases fluctuations of angular velocity. Fluctuations in angular velocity will aggravate the vibration of the manipulator and affect the control accuracy of end-effectors. In this paper, the adaptive PI control strategy with the disturbance observer (DOB) suppresses the vibration of the manipulator by weakening the angular velocity fluctuations. Firstly, dynamics equations of the dual-flexible manipulator servo system considering the bearing friction are established by using the assumed mode method. Next, the low-pass filter in DOB is designed according to the robust stability theorem, so that the servo system can satisfy the stability under dynamic parameters time-varying and friction torque simultaneously. Then, the adaptive law and the over-load compensation control law are designed by Lyapunov’s stability theorem. Finally, numerical simulation analysis and control experiments of the manipulator are carried out. The simulation and experimental results show that: 1) The bearing friction torque can cause angular velocity fluctuations, but the DOB can effectively reduce the influence of the disturbance torque. 2) The adaptive control strategy can effectively reduce angular velocity errors under conditions that the telescopic arm is in different lengths. Therefore, the adaptive PI control strategy with the DOB can effectively suppress angular velocity fluctuations of the manipulator.

Resonant Suppression Method Based on PI Control for Serial Manipulator Servo Drive System.

Fuzzy PI Vector Control Design of AC Servo Permanent Magnet Synchronous Motor System

An Intelligent Nonlinear Control Method for the Multistage Electromechanical Servo System

Research on control methods of permanent magnet synchronous motor position servo system

Tuning method for digital PI controllers of PMSM closed-loop driving system

Mechanical resonance suppression strategy based on shaft torque amplitude limiting control

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Design and Analysis of a Drive System for a Series Manipulator Based on Orthogonal-Fuzzy PID Control

Linear Sliding-mode Variable Structure Research of Direct Torque Control for IPMSM

Non-singular Fast Integral Terminal Sliding Mode Control in PMSM Control Based on Double Power Reaching Law

Adaptive Fuzzy PI Controller Tuning Method For Speed Tracking of Permanent Magnet Synchronous Motor Servo System

Modeling and Active Vibration Control of an Intelligent Flexible Manipulator System

A model-based PID-like motion control method for flexible-joint manipulator with harmonic drives

Speed control method for dual-flexible manipulator with a telescopic arm considering bearing friction based on adaptive PI controller with DOB

Efficient PID Tracking Control of Robotic Manipulators Driven by Compliant Actuators

Precision Motion Control Of Permanent Magnet Linear Synchronous Motor Servo System Based On An Integrated Controller With Inertia Variation Compensation

Optimization of PI Parameters for Permanent Magnet Synchronous Motor Vector Control Based on IPSO

Design of Single Neuron Adaptive PID Based on Quadratic Performance Index for Linear DC Motor

Direct Adaptive Fuzzy Control of A Translating Piezoelectric Flexible Manipulator Driven by A Pneumatic Rodless Cylinder

Reversed Structure Based PI-Lead Controller Antiwindup Design and Self-Commissioning Strategy for Servo Drive Systems

Gain self-tuning of PI controller and parameter optimum for PMSM drives