Abstract:In this paper, electrochemical measurements (CV, PDP, M-S and EIS) and surface characterisation techniques (SEM, EDS, AFM, TEM and XPS) were used to study the passivation phenomenon in high-strength anti-seismic rebar under varying pH conditions. The results show that a passive film with a polycrystalline structure with a certain roughness is formed on the surface of the rebar. The passive film is mainly composed of Fe oxides and hydroxides, and there are also oxides of Nb, Mn, Si and Cr. The existence of these oxides builds a dense and stable passive film. The passive film is basically stable at 7d, but the early growth of the passive film at higher alkalinity show instability. After 10 days of passivation, with the decrease of pH, the passive film gradually densifies, the pitting potential increased by about 0.03–0.14 V, the carrier density decreased by 30% on average, the phase angle increased slightly, and the ratios of Fe 2+ /Fe 3+ and O 2− /OH − increased, resulting in a passive film thickness of 6.2 nm. Dans cet article, on a utilisé des mesures électrochimiques (CV, PDP, M-S et EIS) et des techniques de caractérisation de la surface (MEB, EDS, AFM, TEM et XPS) pour étudier le phénomène de passivation dans les barres d'armature antisismiques à haute résistance sous diverses conditions de pH. Les résultats montrent qu'un film de passivation à structure polycristalline d'une certaine rugosité se forme à la surface des barres d'armatures. Le film de passivation est composé principalement d'oxydes et d'hydroxydes de Fe ainsi que d'oxydes de Nb, Mn, Si et Cr. L'existence de ces oxydes élabore un film de passivation dense et stable. Le film de passivation est fondamentalement stable à 7 jours, mais la croissance précoce du film de passivation à une alcalinité plus élevée montre une instabilité. Après 10 jours de passivation, avec la diminution du pH, le film de passivation se densifie graduellement, le potentiel de piqûration a augmenté d'environ 0.03–0.14 V, la densité du porteur a diminué de 30% en moyenne, l'angle de phase a augmenté légèrement et les rapports de Fe 2+ /Fe 3+ et O 2− /OH − ont augmenté, produisant une épaisseur du film de passivation de 6.2 nm.

Study on the Adsorption of OH− and CaOH+ on Fe (100) Surface and Their Effect on Passivation of Steel Bar: Experiments and DFT Modelling

Atomistic Insights into the Deposition of Corrosion Products on the Surfaces of Steels and Passivation Films

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

The influence of Cr and Mo on the formation of the passivation film on the surface of ferritic stainless steel

Ab-initio calculations on the interaction between OH− and Fe2Mo Laves phase

The Formation Of Passive Films Of Carbon Steel In Borate Buffer And Their Degradation Behavior In Nacl Solution By Secm

Passivation mechanisms and pre-oxidation effects on model surfaces of FeCrNi austenitic stainless steel

Reactive molecular dynamics simulations of the initial oxidation and passivation of Fe-Cr alloy steel

The adsorption of two organic inhibitors on stainless steel passive film: A reactive force field study

Corrosion-induced CaCO3 fouling in steel tube of oilfield wastewater treatment and the interfacial bonding mechanism: An experimental and theoretical investigation

Effects of oxygen adsorption on the corrosion behavior of the Ti(0001) surface: a DFT investigation

INFLUENCE OF CONCENTRATION OF HCO3- TO ANODIC REACTION OF X70 STEEL

Adsorption behavior of the surface conditioning agent particles on the surface of high-strength steel

The Adsorption Behaviors of CO and H2 to FeO onto CaO Surfaces: A Density Functional Theory Study

Effects of varying pH on the passive film formation in high-strength anti-seismic rebar

Study on the repair behavior of passive film of iron-based amorphous coatings by eco-friendly phosphate inhibitors

Theoretical study about adsorbed oxygen reduction over χ-Fe5C2: formation of H2O and CO2

Effect of SO42− in aerobic/anaerobic environment and its interaction with HCO3− on corrosion behavior of carbon steel

The effect of oxygen-containing species on corrosion behavior of Ta (1 1 0) surface: A DFT study with an experimental verification

First-Principles Study on the Adsorption Characteristics of Corrosive Species on Passive Film TiO2 in a NaCl Solution Containing H2S and CO2

Effects of Dodecyltrimethylammonium Bromide Surfactant on Both Corrosion and Passivation Behaviors of Zinc Electrodes in Alkaline Solution