Abstract:Additive manufacturing, particularly Wire Arc Additive Manufacturing (WAAM), provides numerous advantages for the production of near net shape components, since it combines a high productivity with a reduced material waste. It is of major interest when working with expensive materials such as titanium alloy Ti-6Al-4V, commonly used in aerospace. Due to high temperature gradients WAAM is very susceptible to high residual stresses and hence, distortion problems. In order to avoid extensive experimental parameter studies in the design phase to mitigate these issues, a process design based on numerical simulation is favourable. However, accurate estimations up to now necessitate the implementation of transient multi-physics models, which may not be effective when applied to large structures because of their associated large computational time. Consequently, there is a clear need for faster numerical models, especially when path planning optimization is targeted. A promising very fast approach to solve this problem is the so-called inherent strain formulation. However, the original inherent strain formulation is hard to implement in certain commercial finite element (FE) software packages, since strain data is harder to access than stress data. In addition, the original approach requires the modification of the FE solver itself, and hence needs to be adapted for each FE analysis software package individually, which is not only inefficient but might lead also to different results. To overcome these issues a more universally applicable and non-intrusive incremental Inherent Stress formulation that can be incorporated to any commercial finite element solver has been developed within this work. Within the modelling approach the additive manufacturing of a representative component is simulated bead by bead, with the addition of each new bead corresponding to a linear elastic problem that can be rapidly solved. Furthermore, the model incorporates the temperature dependency of the Young's modulus during heating and cooling cycles to better account for thermo-mechanical coupling. Evolution of inherent stress during the deposition of successive layers is also introduced to increase the fidelity of the model. The validity of the model was assessed using two stiffened representative geometries with different complexity. In both cases, a major reduction in computational up to 98 % is observed, with a corresponding displacement error of 20 % in the worst-case scenario, thus constituting an interesting tool to evaluate distortion trends.

Sensitivity Analysis and Lattice Density Optimization for Sequential Inherent Strain Method Used in Additive Manufacturing Process

Optimal and Adaptive Lattice Design Considering Process-Induced Material Anisotropy and Geometric Inaccuracy for Additive Manufacturing

Lattice Structure Design and Optimization With Additive Manufacturing Constraints

A Hybrid Data-Driven Metaheuristic Framework to Optimize Strain of Lattice Structures Proceeded by Additive Manufacturing

Design Optimization of Lattice Structures under Impact Loading for Additive Manufacturing

Layout Design of Thin-Walled Structures with Lattices and Stiffeners Using Multi-Material Topology Optimization

Adaptive Density Optimization of Lattice Structures Sustaining the External Multi-load

Stress-driven generative design and numerical assessment of customized additive manufactured lattice structures

Lattice structure design optimization coupling anisotropy and constraints of additive manufacturing

Mechanical characterization and constitutive modeling of additively-manufactured polymeric materials and lattice structures

Design of elastically isotropic shell lattices from anisotropic constitutive materials for additive manufacturing

Finite-Element-Mesh Based Method for Modeling and Optimization of Lattice Structures for Additive Manufacturing

Residual Stress Generation in Additive Manufacturing of Complex Lattice Geometries

Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components

Quantitative surface characterisation and stress concentration of additively manufactured NiTi lattice struts

Design Tool for Topology Optimization of Self Supporting Variable Density Lattice Structures for Additive Manufacturing

A new approach for calculating inherent strain and distortion in additive manufacturing of metal parts

Incremental inherent stress model for the fast prediction of part distortion made via wire arc additive manufacturing

Evaluating the Stress-Strain Relationship of the Additively Manufactured Lattice Structures

Understanding the strain localization in additively manufactured materials: Micro-scale tensile tests and crystal plasticity modeling