Abstract:The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured via localized wall sensors and damped via near-wall actuators resembling plasma actuators. The time-varying amplitude of the signal of each actuator is computed by processing signals from the sensors. This processing is the result of two control laws: the Linear Quadratic Gaussian regulator (LQG) and the Inverse Feed-Forward Control technique (IFFC). The use of the first, LQG, requires a state-space representation of the system dynamics, so the flow is described via an operator that captures only the most relevant information of the dynamics and results in a reduced order model (ROM). The ROM is computed via the eigensystem realization algorithm, based on the impulse responses of the real system. Collecting such impulse responses may be unfeasible when considering FST because of the high dimensionality of the input forcing needed for a precise description of such a phenomenon. Here, a new method to identify the relevant system dynamics and generate the needed impulse responses is proposed, in a data-driven approach that would be realizable in experiments. Finally, the effectiveness of the technique in delaying bypass transition is shown. The work (i) presents a systematic way to deal with high dimensional disturbances to build ROMs for a control technique, and (ii) shows that even when considering constraints such as the type and size of actuators and sensors, it is possible to achieve at least as large delay of bypass transition as that obtained in more idealized cases found in literature.

Taming Real World Flow Control Experiments with MLC

Stabilization of a multi-frequency open cavity flow with gradient-enriched machine learning control

Jet mixing optimization using machine learning control

Towards human-interpretable, automated learning of feedback control for the mixing layer

Machine-learning flow control with few sensor feedback and measurement noise

Deep Reinforcement Learning: A New Beacon for Intelligent Active Flow Control

Deep Dynamical Modeling and Control of Unsteady Fluid Flows

Comparative analysis of machine learning methods for active flow control

The transformative potential of machine learning for experiments in fluid mechanics

Flow separation control design with experimental validation

Model-Based Reinforcement Learning for Control of Strongly-Disturbed Unsteady Aerodynamic Flows

Deep Model Predictive Control with Online Learning for Complex Physical Systems

A Survey of Direct Learning Control

Control of quasi-equilibrium state of annular flow through reinforcement learning

Flow Control in Wings and Discovery of Novel Approaches via Deep Reinforcement Learning

An Exploration of Flow Control Using Machine Learning and Computational Fluid Dynamics

Relaminarisation of Re_τ = 100 channel flow with globally stabilising linear feedback control

A realizable data-driven approach to delay bypass transition with control theory

Flow control of three-dimensional cylinders transitioning to turbulence via multi-agent reinforcement learning

Machine learning open-loop control of a mixing layer

Machine Learning for Fluid Mechanics