Lithium-Sulfur Batteries for Commercial Applications

Gaoran Li,Zhongwei Chen,Jun Lu

DOI: https://doi.org/10.1016/j.chempr.2017.12.012

IF: 23.5

2018-01-01

Chem

Abstract:Lithium-sulfur (Li-S) batteries hold great promise as energy storage systems because of their low cost and high theoretical energy density. Here, we evaluate Li-S batteries at a system level for the current most critical and challenging applications.

What problem does this paper attempt to address?

Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries.

Ziwei Liang,Jiadong Shen,Xijun Xu,Fangkun Li,Jun Liu,Bin Yuan,Yan Yu,Min Zhu

DOI: https://doi.org/10.1002/adma.202200102

2022-01-01

Abstract:Although lithium-sulfur (Li-S) batteries are promising next-generation energy-storage systems, their practical applications are limited by the growth of Li dendrites and lithium polysulfide shuttling. These problems can be mitigated through the use of single-atom catalysts (SACs), which exhibit the advantages of maximal atom utilization efficiency (≈100%) and unique catalytic properties, thus effectively enhancing the performance of electrode materials in energy-storage devices. This review systematically summarizes the recent progress in SACs intended for use in Li-metal anodes, S cathodes, and separators, briefly introducing the operating principles of Li-S batteries, the action mechanisms of the corresponding SACs, and the fundamentals of SACs activity, and then comprehensively describes the main strategies for SACs synthesis. Subsequently, the applications of SACs and the principles of SACs operation in reinforced Li-S batteries as well as other metal-S batteries are individually illustrated, and the major challenges of SACs usage in Li-S batteries as well as future development directions are presented.
Nontraditional Approaches To Enable High-Energy and Long-Life Lithium-Sulfur Batteries

Chen Zhao,Khalil Amine,Gui-Liang Xu

DOI: https://doi.org/10.1021/acs.accounts.3c00400

IF: 24.466

2023-09-21

Accounts of Chemical Research

Abstract:ConspectusLithium-sulfur (Li-S) batteries are promising for automotive applications due to their high theoretical energy density (2600 Wh/kg). In addition, the natural abundance of sulfur could mitigate the global raw material supply chain challenge of commercial lithium-ion batteries that use critical elements, such as nickel and cobalt. However, due to persistent polysulfide shuttling and uncontrolled lithium dendrite growth, Li-S batteries using nonencapsulated sulfur cathodes and...

chemistry, multidisciplinary
Advances in High-Performance Lithium-Sulfur Batteries

Shuai Liu,Lu Yao,Qin Zhang,Lu-Lu Li,Nan-Tao Hu,Liangming Wei,Hao Wei

DOI: https://doi.org/10.3866/PKU.WHXB201706021

2017-01-01

Acta Physico-Chimica Sinica

Abstract:Lithium-sulfur batteries are considered to be rather latest and high-performance storage batteries due to their high theoretical specific capacity (1675 mAt.g(-1)), high energy density (2600 Wh.kg(-1)), environmental friendliness, low cost, and safety. These features make them important in the field of mobile electric vehicles and portable devices. However, because of rapid capacity attenuation with poor cycle and rate performances, these batteries are far from ideal for commercial applications. This paper reviews the entire and latest studies in lithium-sulfur batteries. Cathodes, electrolyte, separators, and anodes protection are introduced in detail. The existing lithium-sulfur batteries defects and problems are analyzed. Finally, we provide some insights into the future direction and prospects of lithium batteries.
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability

Yi Chen,Tianyi Wang,Huajun Tian,Dawei Su,Qiang Zhang,Guoxiu Wang

DOI: https://doi.org/10.1002/adma.202003666

IF: 29.4

2021-06-06

Advanced Materials

Abstract:Lithium-ion batteries, which have revolutionized portable electronics over the past three decades, were eventually recognized with the 2019 Nobel Prize in chemistry. As the energy density of current lithium-ion batteries is approaching its limit, developing new battery technologies beyond lithium-ion chemistry is significant for next-generation high energy storage. Lithium–sulfur (Li–S) batteries, which rely on the reversible redox reactions between lithium and sulfur, appears to be a promising energy storage system to take over from the conventional lithium-ion batteries for next-generation energy storage owing to their overwhelming energy density compared to the existing lithium-ion batteries today. Over the past 60 years, especially the past decade, significant academic and commercial progress has been made on Li–S batteries. From the concept of the sulfur cathode first proposed in the 1960s to the current commercial Li–S batteries used in unmanned aircraft, the story of Li–S batteries is full of breakthroughs and back tracing steps. Herein, the development and advancement of Li–S batteries in terms of sulfur-based composite cathode design, separator modification, binder improvement, electrolyte optimization, and lithium metal protection is summarized. An outlook on the future directions and prospects for Li–S batteries is also offered.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Recent Advances and Applications Toward Emerging Lithium–Sulfur Batteries: Working Principles and Opportunities

Rongyu Deng,Meng Wang,Huanyu Yu,Shunrui Luo,Jinhui Li,Fulu Chu,Bin Liu,Feixiang Wu

DOI: https://doi.org/10.1002/eem2.12257

2022-03-03

Abstract:Lithium-sulfur (Li-S) batteries have been considered as promising candidates for large scale high-energy-density devices due to the potentially high energy density, low cost, and more pronounced ecological compatibility. However, the complex Li-S conversion reactions, unsatisfactory battery performance, and unsafe metallic Li anode restrict the development of Li-S batteries to achieve commercialization. This review mainly focuses on three aspects which are the remaining challenges, recent advances, and applications in Li-S batteries. Firstly, this review portrays Li-S conversion chemistry involving the multi-step and multi-electron reaction mechanism, as well as the remaining challenges. Then the scientific strategies and very recent advances of the cathode, electrolyte, lithium anode, and other constituent parts of Li-S batteries are detailly summed up, as well as their advantages and limitations. For the sake of promoting the Li-S batteries practicalization, next section is primarily concerned with problems, the corresponding solutions, and application scenarios of practical pouch cells. Finally, the important findings as guidelines and some future directions as trends for developing emerging Li-S batteries are briefly summarized.

materials science, multidisciplinary
How Far Away Are Lithium-Sulfur Batteries from Commercialization?

Kunlei Zhu,Chao Wang,Zixiang Chi,Fei Ke,Yang,Anbang Wang,Weikun Wang,Lixiao Miao

DOI: https://doi.org/10.3389/fenrg.2019.00123

IF: 3.4

2019-01-01

Frontiers in Energy Research

Abstract:With the increasing demand for green energy due to environmental issues, developing batteries with high energy density is of great importance. Li-S batteries, since their big breakthrough in 2009, have attracted much attention in both academia and industry. In academia, significant progress has been made in improving the specific capacity, rate capacity, and cycle performance using various novel strategies. However, the performance is hugely different when these strategies are extended to mass production, indicating a significant difference between academic research, and industrial production. In this brief review, we discussed the gap between the academic research and commercialization in detail based on literature reports and to our more than 10 years' experience on Li-S pouch cells, which including cathodes, anodes, separators, interlayers, electrolytes, and additives. The problems, which existing in pouch cells by using the materials and technologies developed by academic research using coin cells, was analyzed. We expected that this review could be helpful to both academic research and industrial commercialization of Li-S batteries.
Lithium–sulfur Batteries: from Liquid to Solid Cells

Zhan Lin,Chengdu Liang

DOI: https://doi.org/10.1039/c4ta04727c

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:This review article gives insights on the current status and future perspectives of the lithium–sulfur battery technology.
Recent Progress and Emerging Application Areas for Lithium-Sulfur Battery Technology

Susanne Dörfler,Sylwia Walus,Jacob Locke,Abbas Fotouhi,Daniel J Auger,Neda Shateri,Thomas Abendroth,Paul Härtel,Holger Althues,Stefan Kaskel

DOI: https://doi.org/10.1002/ente.202000694

Abstract:Electrification is progressing significantly within the present and future vehicle sectors such as large commercial vehicles (e.g., trucks and buses), high-altitude long endurance (HALE), high-altitude pseudosatellites (HAPS), and electric vertical take-off and landing (eVTOL). The battery systems' performance requirements differ across these applications in terms of power, cycle life, system cost, etc. However, the need for high gravimetric energy density, 400 Wh kg-1 and beyond, is common across them all, as it enables vehicles to achieve extended range, a longer mission duration, lighter weight, or increased payload. The system-level requirements of these emerging applications are broken down into the component-level developments required to integrate Li-S technology as the power system of choice. To adapt batteries' properties, such as energy and power density, to the respective application, the academic research community has a key role to play in component-level development. However, materials and component research must be conducted within the context of a viable Li-S cell system. Herein, the key performance benefits, limitations, modeling, and recent progress of the Li-S battery technology and its adaption toward real-world application are discussed.
Post lithium-sulfur battery era: challenges and opportunities towards practical application

Jiahang Chen,Yang Zhang,Jun Yang,Yanna Nuli,Jiulin Wang

DOI: https://doi.org/10.1007/s11426-022-1421-7

2022-11-04

Science China Chemistry

Abstract:Lithium-sulfur (Li-S) batteries have been regarded as a promising next-generation energy storage system owing to the high theoretical energy density and natural abundance of sulfur. Abundant fundamental researches have pushed the flourishing development on electrochemical behaviors in recent 20 years. It is time to evolve into post-Li-S battery era with the pursuit towards practical application. During the landmark leap, numerous new challenges appear under harsh conditions, such as high sulfur loading, low cathode density, lean electrolyte and limited lithium reservoir. Herein, we summarize the considerable parameters of punch Li-S cells and review the pioneering studies focused on the cathode structure, conversion kinetics, electrode interphase and battery safety. The interwoven relationship of these key points is concluded and discussed, which provides guidance to future researches aiming to safe and long-lifespan Li-S batteries with high energy density.

chemistry, multidisciplinary
Research Progress in Lithium Sulfur Battery

Wan Wenbo,Pu Weihua,Ai Desheng

DOI: https://doi.org/10.3969/j.issn.1008-4800.2017.22.067

2013-01-01

Progress in chemistry

Abstract:Lithium-sulfur (Li-S) battery is a promising electrochemical energy storage system that has high theoretical energy density of 2600 Wh center dot kg(-1), which is 3 to 5 times that of Li-ion batteries. It has attracted more and more attentions in recent years. Great efforts have been made to improve the stability of electrode structure, the utilization efficiency of sulfur in the cathode and the enhancement of cycle life of the battery. In this paper, the recent progress of the lithium-sulfur battery is reviewed from four aspects: modification of sulfur-based composite cathode material, electrolytes, protection of lithium anode and design of lithium-sulfur cell configurations. The main factors on the specific capacity and cycle stability of the lithium-sulfur battery are analyzed. The prospects and development trends on lithium-sulfur battery are also discussed.
A Comprehensive Understanding of Lithium–Sulfur Battery Technology

Tao Li,Xue Bai,Umair Gulzar,Yu‐Jun Bai,Claudio Capiglia,Wei Deng,Xufeng Zhou,Zhaoping Liu,Zhifu Feng,Remo Proietti Zaccaria

DOI: https://doi.org/10.1002/adfm.201901730

IF: 19

2019-06-12

Advanced Functional Materials

Abstract:Lithium–sulfur batteries (LSBs) are regarded as a new kind of energy storage device due to their remarkable theoretical energy density. However, some issues, such as the low conductivity and the large volume variation of sulfur, as well as the formation of polysulfides during cycling, are yet to be addressed before LSBs can become an actual reality. Here, presented is a comprehensive overview illustrating the techniques capable of mitigating these undesirable problems together with the electrochemical performances associated to the different proposed solutions. In particular, the analysis is organized by separately addressing cathode, anode, separator, and electrolyte. Furthermore, to better understand the chemistry and failure mechanisms of LSBs, important characterization techniques applied to energy storage systems are reviewed. Similarly, considerations on the theoretical approaches used in the energy storage field are provided, as they can become the key tool for the design of the next generation LSBs. Afterward, the state of the art of LSBs technology is presented from a geopolitical perspective by comparing the results achieved in this field by the main world actors, namely Asia, North America, and Europe. Finally, this review is concluded with the application status of LSBs technology, and its prospects are offered.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Revisiting Scientific Issues for Industrial Applications of Lithium-Sulfur Batteries

Bo Liu,Ruyi Fang,Dong Xie,Wenkui Zhang,Hui Huang,Yang Xia,Xiuli Wang,Xinhui Xia,Jiangping Tu

DOI: https://doi.org/10.1002/eem2.12021

IF: 15

2018-01-01

Energy & Environmental Materials

Abstract:Inspired by high theoretical energy density (~2600 W h kg−1) and cost‐effectiveness of sulfur cathode, lithium–sulfur batteries are receiving great attention and considered as one of the most promising next‐generation high‐energy‐density batteries. However, over the past decades, the energy density and reliable safety levels as well as the commercial progress of lithium–sulfur batteries are still far from satisfactory due to the disconnection and huge gap between fundamental research and practical application. Therefore, it is highly necessary to revisit the scientific issues for the industrial applications of lithium–sulfur batteries. In this review, we focus on discussing the impact of design parameters (such as compaction density, sulfur loading, and electrolyte/sulfur ratio) on the electrochemical performance of lithium–sulfur batteries and corresponding inherent relationship and rules between them. We also propose the practical design rules of advanced sulfur electrodes. Moreover, safety hazard in respect of electrolyte, separator, and lithium metal anode is also illustrated in detail. With the target of paving the way for practical application of lithium–sulfur batteries, feasible solutions and strategies are brought up to address the aforementioned problems. Finally, we will discuss the current challenges and future research chance of lithium–sulfur batteries.
A review on lithium-sulfur batteries: Challenge, development, and perspective

Qinjun Shao,Shengdong Zhu,Jian Chen

DOI: https://doi.org/10.1007/s12274-022-5227-0

IF: 9.9

2023-01-06

Nano Research

Abstract:Lithium-sulfur (Li-S) battery is recognized as one of the promising candidates to break through the specific energy limitations of commercial lithium-ion batteries given the high theoretical specific energy, environmental friendliness, and low cost. Over the past decade, tremendous progress have been achieved in improving the electrochemical performance especially the lifespan by various strategies mainly concentrated on the sulfur cathodes. In this review, the fundamental electrochemistry of sulfur cathode and lithium anode is revealed to understand the current dilemmas. And the advances achieved through diverse strategies are comprehensively summarized, which involves lithium polysulfides (LiPSs) limitation, sulfur redox reaction regulation and electrocatalysis in sulfur cathode and artificial solid electrolyte interface (SEI), electrolyte design, and structured anode in lithium anode. Additionally, the differences between laboratory level coin cells and actual pouch cells need to be addressed that only few reports on practical Li-S pouch cell are available due to the unexpected problems on both sulfur cathode and lithium anode which are masked at lithium and electrolyte excess. Lastly, the challenges and perspective toward the practical Li-S batteries are also offered.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

Hong-Jie Peng,Jia-Qi Huang,Xin-Bing Cheng,Qiang Zhang

DOI: https://doi.org/10.1002/aenm.201700260

IF: 27.8

2017-01-01

Advanced Energy Materials

Abstract:Owing to high specific energy, low cost, and environmental friendliness, lithium-sulfur (Li-S) batteries hold great promise to meet the increasing demand for advanced energy storage beyond portable electronics, and to mitigate environmental problems. However, the application of Li-S batteries is challenged by several obstacles, including their short life and low sulfur utilization, which become more serious when sulfur loading is increased to the practically accepted level above 3-5 mg cm(-2). More and more efforts have been made recently to overcome the barriers toward commercially viable Li-S batteries with a high sulfur loading. This review highlights the recent progress in high-sulfur-loading Li-S batteries enabled by hierarchical design principles at multiscale. Particularly, basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator are under specific concerns. Hierarchy in the multiscale design is proposed to guide the future development of high-sulfur-loading Li-S batteries.
Progress study on the development of lithium-sulfur batteries

Weixuan Han,Zheya Li,Rizhou Wang

DOI: https://doi.org/10.1088/1755-1315/1011/1/012004

2022-04-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract With the rapid development of the new energy industry in recent years, the demand for lithium batteries is very urgent, and at the same time, the requirements for the performance of lithium batteries are getting higher and higher. Lithium-sulfur batteries, as a very competitive lithium battery, can reach as much as five times the energy density of traditional lithium batteries. However, due to various limitations in the reaction process, Li-S batteries also need to undergo various performance improvements to improve the efficiency of Li-S batteries and industrial applications. This paper introduces the advantages and disadvantages of lithium-sulfur batteries as well as future challenges. It also introduces the recent developments in lithium-sulfur batteries from three different aspects, i.e., material modification, structure-based modifications, and discussion from the perspective of electrolyte additives.
A Perspective toward Practical Lithium–Sulfur Batteries

Meng Zhao,Bo-Quan Li,Xue-Qiang Zhang,Jia-Qi Huang,Qiang Zhang

DOI: https://doi.org/10.1021/acscentsci.0c00449

IF: 18.2

2020-06-29

ACS Central Science

Abstract:Lithium–sulfur (Li–S) batteries have long been expected to be a promising high-energy-density secondary battery system since their first prototype in the 1960s. During the past decade, great progress has been achieved in promoting the performances of Li–S batteries by addressing the challenges at the laboratory-level model systems. With growing attention paid to the application of Li–S batteries, new challenges at practical cell scales emerge as the bottleneck. In this Outlook, the key parameters for practical Li–S batteries to achieve practical high energy density are emphasized regarding high-sulfur-loading cathodes, lean electrolytes, and limited excess anodes. Subsequently, the key scientific problems are redefined in practical Li–S batteries beyond the previous ones under ideal conditions. Finally, viable strategies are proposed to address the above challenges as future research directions.This Outlook emphasizes the key parameters and redefines the fundamental scientific problems of practical Li−S batteries, and further proposes viable strategies to address the emerging challenges as future research directions.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Strategies toward High‐Loading Lithium–Sulfur Battery

Yin Hu,Wei Chen,Tianyu Lei,Yu Jiao,Jianwen Huang,Anjun Hu,Chuanhui Gong,Chaoyi Yan,Xianfu Wang,Jie Xiong

DOI: https://doi.org/10.1002/aenm.202000082

IF: 27.8

2020-03-20

Advanced Energy Materials

Abstract:Lithium–sulfur (Li–S) batteries, due to the high theoretical energy density, are regarded as one of the most promising candidates for breaking the limitations of energy‐storage system based on Li‐ion batteries. Tremendous efforts have been made to meet the challenge of high‐performance Li–S batteries, in which a sulfur loading of above 5 mg cm−2 delivers an areal capacity higher than 5 mAh cm−2 without compromising specific capacity and cycling stability for practical applications. However, serious problems have been exposed during the scaling up of the sulfur loading. In this review, based on mechanistic insights into structural configuration, catalytic conversion, and interfacial engineering, the problems and corresponding strategies in the development of high‐loading Li–S batteries are highlighted and discussed, aiming at bridging the gap between fundamental research and practical cell‐level designs. Stemming from the current achievements, future directions targeting the high‐energy‐density Li–S batteries for commercialization are proposed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Advances in All-Solid-State Lithium-Sulfur Batteries for Commercialization

Birhanu Bayissa Gicha,Lemma Teshome Tufa,Njemuwa Nwaji,Xiaojun Hu,Jaebeom Lee

DOI: https://doi.org/10.1007/s40820-024-01385-6

2024-04-15

Abstract:Solid-state batteries are commonly acknowledged as the forthcoming evolution in energy storage technologies. Recent development progress for these rechargeable batteries has notably accelerated their trajectory toward achieving commercial feasibility. In particular, all-solid-state lithium-sulfur batteries (ASSLSBs) that rely on lithium-sulfur reversible redox processes exhibit immense potential as an energy storage system, surpassing conventional lithium-ion batteries. This can be attributed predominantly to their exceptional energy density, extended operational lifespan, and heightened safety attributes. Despite these advantages, the adoption of ASSLSBs in the commercial sector has been sluggish. To expedite research and development in this particular area, this article provides a thorough review of the current state of ASSLSBs. We delve into an in-depth analysis of the rationale behind transitioning to ASSLSBs, explore the fundamental scientific principles involved, and provide a comprehensive evaluation of the main challenges faced by ASSLSBs. We suggest that future research in this field should prioritize plummeting the presence of inactive substances, adopting electrodes with optimum performance, minimizing interfacial resistance, and designing a scalable fabrication approach to facilitate the commercialization of ASSLSBs.
Solid-State Electrolytes in Lithium-Sulfur Batteries: Latest Progresses and Prospects.

Chunxiang Xian,Qiyue Wang,Yang Xia,Feng Cao,Shenghui Shen,Yongqi Zhang,Minghua Chen,Yu Zhong,Jun Zhang,Xinping He,Xinhui Xia,Wenkui Zhang,J.P. Tu

DOI: https://doi.org/10.1002/smll.202208164

IF: 13.3

2023-01-01

Small

Abstract:Solid-state lithium-sulfur batteries (SSLSBs) have attracted tremendous research interest due to their large theoretical energy density and high safety, which are highly important indicators for the development of next-generation energy storage devices. Particularly, safety and "shuttle effect" issues originating from volatile and flammable liquid organic electrolytes can be fully mitigated by switching to a solid-state configuration. However, their road to thecommercial application is still plagued with numerous challenges, most notably the intrinsic electrochemical instability of solid-state electrolytes (SSEs) materials and their interfacial compatibility with electrodes and electrolytes. In this review, a critical discussion on the key issues and problems of different types of SSEs as well as the corresponding optimization strategies are first highlighted. Then, the state-of-the-art preparation methods and properties of different kinds of SSE materials, and their manufacture, characterization and performance in SSLSBs are summarized in detail. Finally, a scientific outlook for the future development of SSEs and the avenue to commercial application of SSLSBs is also proposed.
Study on Lithium-Sulfur Batteries

Yong-Gang Wang,Lina Wang,Shouyi Yuan,Yong-Yao Xia

DOI: https://doi.org/10.1149/ma2016-02/5/775

2016-01-01

ECS Meeting Abstracts

Abstract:Lithium-Sulfur (Li-S) batteries have recently raised worldwide attention owning to the high specific theoretical energy density of sulfur (2600Wh kg-1), the low cost and the wide availability of sulfur. However, the practical application of lithium-sulfur batteries has been hindered by several challenges, such as the shuttling of polysulfide intermediates, the large volume expansion of sulfur during charge/discharge and the dendrites formation on Li-anode. In this talk, we will introduce our recent investigation about Li-S batteries, including physical and chemical immobilization of sulfur to improve cycling stability, segregator optimization to minimize the shuttling effect and design of ionic liquids based electrolyte system to reduce the self-discharge. Finally, we introduce a lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte (Li2S/electrolyte-1/LISICON/electrolyte-2/Li) and then replaced the Li anode with Al and graphite, which demonstrates a proof of concept of metal Li free Li-ion Sulfur battery. Reference [1] S.Y. Yuan, Z.Y. Guo, L.N. Wang, S. Hu, Y. G. Wang*, Y.Y. Xia*, Adv. Sci. 2015, 2: 1500071. [2] S.Y. Yuan, J.W. Bao, L.N. Wang, Y.Y. Xia, D.G. Truhlar*, Y.G. Wang*, Adv. Energy Mater., 2015 , 1501733. [3] L.N. Wang, J.Y. Liu, S. Haller, Y.G. Wang*, Y.Y. Xia*, Chem. Commun., 2015, 51: 6996. [4] L.N. Wang, J.Y. Liu, S.Y. Yuan, Y.G. Wang*, Y.Y. Xia*, Energy Environ. Sci., 2016, 9: 224. [5] L.N. Wang, Y.G. Wang*, Y.Y. Xia*, Energy Environ. Sci., 2015, 8: 1551.

Lithium-Sulfur Batteries for Commercial Applications

Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries.

Nontraditional Approaches To Enable High-Energy and Long-Life Lithium-Sulfur Batteries

Advances in High-Performance Lithium-Sulfur Batteries

Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability

Recent Advances and Applications Toward Emerging Lithium–Sulfur Batteries: Working Principles and Opportunities

How Far Away Are Lithium-Sulfur Batteries from Commercialization?

Lithium–sulfur Batteries: from Liquid to Solid Cells

Recent Progress and Emerging Application Areas for Lithium-Sulfur Battery Technology

Post lithium-sulfur battery era: challenges and opportunities towards practical application

Research Progress in Lithium Sulfur Battery

A Comprehensive Understanding of Lithium–Sulfur Battery Technology

Revisiting Scientific Issues for Industrial Applications of Lithium-Sulfur Batteries

A review on lithium-sulfur batteries: Challenge, development, and perspective

Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

Progress study on the development of lithium-sulfur batteries

A Perspective toward Practical Lithium–Sulfur Batteries

Strategies toward High‐Loading Lithium–Sulfur Battery

Advances in All-Solid-State Lithium-Sulfur Batteries for Commercialization

Solid-State Electrolytes in Lithium-Sulfur Batteries: Latest Progresses and Prospects.

Study on Lithium-Sulfur Batteries