Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Uniform Stresses Inside Two Hyperbolic Inhomogeneities

An elliptical inhomogeneity under nonuniform heat flux

An Elliptical Incompressible Liquid Inclusion in a Compressible Hyperelastic Solid of Harmonic Type

General Solution for Inhomogeneous Line Inclusion with Non-Uniform Eigenstrain

Shape of a single inclusion enclosing uniform stress for a non-uniform far-field loading in anti-plane shear

Three-phase Elliptical Inclusions with an Internal Stress Field of Linear Form

On Buckling of Non-Uniform Shallow Arch under a Central Concentrated Load

Geometrical Shape of In-Plane Inclusion Characterized by Polynomial Internal Stress Field under Uniform Eigenstrains

Instability of Imperfect Non-Uniform Shallow Arch under Uniform Radial Pressure for Pinned and Fixed Boundary Conditions

Hyperelastic bodies under homogeneous Cauchy stress induced by three-dimensional non-homogeneous deformations

Inclusion Shapes Characterized by Polynomial Internal Stress Field under Uniform Anti-Plane Eigenstrains

Universal Deformations and Inhomogeneities in Isotropic Cauchy Elasticity

On the Internal Stresses in a Half Plane and a Layer Containing Localized Inelastic Strains or Inclusions

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

Uniform Convergence for Linear Elastostatic Systems with Periodic High Contrast Inclusions

Green's functions for an anisotropic elastic matrix containing an elliptical incompressible liquid inclusion

Non-elliptical inclusions that achieve uniform internal strain fields in an elastic half-plane

Stress Fields of A Spheroidal Inhomogeneity with an Interphase in an Infinite Medium under Remote Loadings

Contact stress analysis of an elastic half-plane containing multiple inclusions

Elliptic rigid inclusion in soft materials of harmonic type