Abstract:Abstract Multilayer adhesive bonded structures/materials (MABS) are widely used as structural components, especially in the field of aerospace. However, for MABS workpieces, the facts that the weak echo of the deep interfacial debonding defects (DB) caused by the large acoustic attenuation coefficient of each layer and this echo, which generally aliases with the excitation wave and the backwall echo of the surface layer, pose a great challenge for the conventional longitudinal wave ultrasonic nondestructive testing methods. In this work, an ultrasonic resonance evaluation method for deep interfacial DBs of MABS is proposed based on the ultrasonic resonance theory and the aliasing effect of ultrasonic waves in MABS. Theoretical and simulation analysis show that the optimal inspection frequency for II-interfacial DBs is 500 kHz when the shell thickness is 1.5 mm and the ethylene propylene diene monomer (EPDM) thickness is 1.5 mm, and the optimal inspection frequency is 250 kHz when the shell thickness is 1.5 or 2.0 mm and the EPDM thickness is 2.0 mm. Verification experiments show that the presence of a DB in the II-interface causes a resonance effect, and in the same inspection configuration, the larger the defect size, the more pronounced this effect is. This resonance effect manifests itself as an increase in the amplitude and an increase in the vibration time of the A-scan signal as well as a pronounced change in the frequency of the received ultrasonic wave. In addition, the increase in the excitation voltage further highlights the ultrasonic resonance effect. Four imaging methods – the integrations of the signal and the signal envelope curve, the maximum amplitude of the fast Fourier transform (FFT) of the signal, and the signal energy – were used for C-scan imaging of ultrasonic resonance evaluation of MABS’s deep interfacial DBs and all these methods can clearly show the sizes and locations of the artificial defects and internal natural defect. The normalized C-scan imaging method proposed in this study can further highlight the weak changes in the signals in the C-scan image. The research results of this study have laid a solid theoretical and practical foundation for the ultrasonic resonance evaluation of MABS.

Piezoelectricity in Structural Adhesives and Application for Monitoring Joint Integrity Via Guided Ultrasonic Waves.

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Self-sensing Joints for In-Situ Structural Health Monitoring of Composite Pipes: A Piezoresistive Behavior-Based Method

Ferroelectric Thin-Film Active Sensors for Structural Health Monitoring

Monitoring of the curing process and thermal failure of Adhesive-Bonded Structures based on damping measurement using quantitative electromechanical impedance

Adhesive curing effect of bonded piezoelectric transducer on electromechanical impedance-based concrete structural damage detection

Piezoelectric Transducers for Structural Health Monitoring of Joint Structures in Cylinders: A Wave-Based Design Approach

Detectable Adhesives: Nondestructive Detection of Adhesion

Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete

Damage detection for structural health monitoring using ultra-sensitive flexible piezoelectret sensors

Durability Assessment of Bonded Piezoelectric Wafer Active Sensors for Aircraft Health Monitoring Applications

Research on the influence of an adhesive layer on the monitoring signal of piezoelectric sensors

Piezoelectric Wafer Active Sensor Transducers for Acoustic Emission Applications

Evaluation of Adhesive Joints Using Ultrasonic Rayleigh Waves

Debonding of piezoelectric transducers for residue-free ultrasonic non-destructive testing

Ultrasonic resonance evaluation method for deep interfacial debonding defects of multilayer adhesive bonded materials

Health Monitoring of Single-Element Piezoelectric Transducer Using Its Electromechanical Admittance

Evaluation of Fatigue Damage Monitoring of Single-Lap Composite Adhesive Joint Using Conductivity

Experimental and numerical investigation of the bonding conditions of piezoelectric sensors under high compressive strains on structures

Investigation on in-situ sprayed, annealed and corona poled PVDF-TrFE coatings for guided wave-based structural health monitoring: From crystallization to piezoelectricity

Recent Advances in Piezoelectric Wafer Active Sensors for Structural Health Monitoring Applications