Abstract:Heat transfer enhancement is a significant issue in the research and industry fields. The improvement of heat transfer rates in thermal devices by adopting suitable techniques can result in significant technical advantages and cost savings. These targets could be achieved by the employment of different available techniques, divided into passive and active ones. Passive methods use special surface geometries, like rough surfaces, or fluid additives to achieve the aim of heat transfer enhancement, whereas the active techniques require external power sources, such as mechanical aids, electric or acoustic fields and surface vibration. Among the available passive methods, the employment of ribbed surfaces already covers several commercial applications, but other techniques have recently burst on the scene of engineering research, like the use of nanoparticles as additives in the working fluids in order to improve their thermal conductivity and convective heat transfer coefficients. In recent years, many attempts have been made to minimize the scales and improve the performance of devices. Traditional technologies are becoming unsuitable for heat removal from systems of small size, even of micrometric scale. For this reason, much interest is addressed to heat transfer in microchannels and porous media. The advantages of these consist of ability to produce very high heat transfer coefficients, compactness, high surface-to-volume ratios, and small coolant requirements. The present volume is the Special Issue on ‘‘Advances in Heat Transfer Enhancement.’’ Due to the large interest on this topic, we hope that it will be the first of a series that periodically enables researchers to highlight their new findings related to heat transfer enhancement. The large interest on heat transfer enhancement technologies is shown in Figure 1 which shows some recent data on the number of papers from 1993 to 2013 found in SCOPUS under ‘‘Heat Transfer Enhancement.’’ The aim of this Special Issue is to present the recent developments and research efforts on heat transfer enhancement, with the purpose of providing guidelines for future research in this area. The present issue includes 13 papers which deal on the more recent research activities on heat transfer enhancement. A numerical study on laminar mixed convection in nanofluids in an equilateral triangular duct, heated by a uniform and constant heat flux, is reported in Manca et al. The simulation result showed the increase of the convective heat transfer coefficients, in particular, for high concentration of nanoparticles and for increasing values of Richardson number. Qi et al. propose a novel design of a top combustion regenerative hot blast stove. A three-dimensional mathematical model has been developed to simulate the associated fluid flow, combustion and heat transfer phenomenon. Its performance was assessed and compared with traditional design using the developed numerical model. The novel design was found to be able to establish more symmetric swirling flow as well as more uniform temperature distribution within the stove and more efficient combustion processes could be obtained. Chen et al. have experimentally investigated how longitudinal vibrations and the condensation section temperatures affect the thermal performance of heat pipes with different inclined angles. The results showed that with the heat pipe placed with the condensation section on top and the evaporation section on bottom, a fairly low and constant thermal resistance was obtained, both with and without heat pipe vibration and regardless of the condensation section temperature. The effects of the nozzle spacing, height, injection pressure and comprehensive factors on the heat transfer characteristics for a new die steel quenching equipment have been numerically studied by Zhu et al. The results are useful for optimization design of the equipment and actual production process. The effects of film-cooling holes arrangement and groove depth on the heat transfer and film-cooling performance of blade tip have been numerically investigated by Tong et al. The results show that the area-averaged film-cooling effectiveness is higher when the holes distribute densely near the leading edge, and the cooling effect of the groove depth with 2.0mm is obviously high compared with the other two depths. Abdel-Ghany et al. have developed a theoretical model to predict the absorptivity, transmissivity, reflectivity, and emissivity of plastic nets and examine the equality under natural conditions. Numerical models

Introduction to the Special Issue on Advances in Modeling and Simulation of Complex Heat Transfer and Fluid Flow

Multiscale Fluid Mechanics and Modeling

Some Recent Advances in Computational Heat Transfer and Fluid Flow

PREFACE: THERMAL-FLUID DYNAMICS OF MULTIPHASE FLOW

Special Issue on Advances in Micro/nanoscale Fluid Flow and Heat Transfer

Mathematical and Computational Analyses of Flow and Transport Phenomena

Numerical Simulation of Fluid Flow and Heat Transfer Processes

Mathematical and Numerical Modeling of Flow and Transport 2013

SOME ADVANCES IN NUMERICAL SIMULATIONS OF MULTISCALE HEAT TRANSFER PROBLEMS AND PARTICULARLY FOR BOILING HEAT TRANSFER

Heat Transfer with Interface Effects in High-Enthalpy and High-Speed Flow: Modelling Review and Recent Progress

Foreword to Special Issue on Advances in Optimization Methods in Heat and Mass Transfer

Recent Advances in Theory, Simulations, and Experiments on Multiphase Flows

Multiscale Simulations of Heat Transfer and Fluid Flow Problems

Recent Advances in Modeling and Simulation of Nanofluid Flows-Part I: Fundamentals and Theory

Revolutionizing Heat Transfer and Fluid Flow Models: Fractional Calculus and Non-Newtonian Dynamics Meet Advanced Numerical Methods

Numerical Simulation of Fluidization: Driven by Challenges

A compressible semi-resolved computational fluid dynamics-discrete element method coupling model for fluid–solid systems with heat transfer

Microscale physics and macroscale convective heat transfer in supercritical fluids

Numerical Simulation Of Heat And Mass Transfer In Air-Water Direct Contact Using Computational Fluid Dynamics

Editorial to Special Issue on Advances in Heat Transfer Enhancement

Introduction to the Special Issue on Modeling and Simulation of Fluid Flows in Fractured Porous Media: Current Trends and Prospects