Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1...

Li Wang,Jishi Zhao,Xiangming He,Jian Gao,Jianjun Li,Chunrong Wan,Changyin Jiang

2012-01-01

Abstract:4. CONCLUSIONIn attempts to investigate the kinetics properties of LiNi1/3Co1/3Mn1/3O2 cathode, EIS technique

What problem does this paper attempt to address?

Electrochemical Impedance Spectroscopy (eis) Study of Lini1/3co1/3mn1/3o2 for Li-Ion Batteries

Li Wang,Jishi Zhao,Xiangming He,Jian Gao,Jianjun Li,Chunrong Wan,Changyin Jiang

DOI: https://doi.org/10.1016/s1452-3981(23)13343-8

IF: 1.541

2012-01-01

International Journal of Electrochemical Science

Abstract:Electrochemical impedance spectroscopy (EIS) is employed to investigate the electrochemical properties of LiNi1/3Co1/3Mn1/3O2 cathode. The Nyquist plots at initial state, 40%SOC, 80%SOC and 100%SOC at first cycle, second cycle and 10th cycle, respectively, are investigated. The information of electrolyte resistance, surface film resistance and charge transfer resistance are obtained by modeling with two different equivalent circuits according with the Nyquist plots with different shape. The comparison between LiCoO2 and LiNi1/3Co1/3Mn1/3O2 is also investigated in this study. It can be speculated that both the passivating film on the surface of LiNi1/3Co1/3Mn1/3O2 cathode and the channels for lithium ion transfer in LiNi1/3Co1/3Mn1/3O2 cathode are mostly formed during the first charge/discharge process. Both diffusion coefficient of lithium ion in LiNi1/3Co1/3Mn1/3O2 cathode and exchange current density are in accord with the analysis of the Nyquist plots of electrochemical impedance spectra, indicating the rationality of the speculation.
Kinetic Investigation of LiCoO2 by Electrochemical Impedance Spectroscopy (EIS)

Jishi Zhao,Li Wang,Xiangming He,Chunrong Wan,Changyin Jiang

DOI: https://doi.org/10.1016/s1452-3981(23)15299-0

IF: 1.541

2010-01-01

International Journal of Electrochemical Science

Abstract:Electrochemical impedance spectroscopy (EIS) is employed to investigate the electrochemical properties of LiCoO2 cathode. At initial state, the Nyquist plots consist of one compressed semicircle in high and intermediate frequency ranges that reflect charge transfer resistance and a straight line inclined at a constant angle to the real axis in lower frequency range that reflects the diffusion properties of lithium ion in solid materials. When the cell was charged for several hours, the Nyquist plots consist of two compressed semicircles alike in appearance of a half ellipse at high and intermediate frequency ranges and an anomalous line at lower frequency range, and the shape of the second semicircle is a half ellipse in appearance almost. The information of electrolyte resistance, surface film resistance and charge transfer resistance have been obtained by modeling with two different equivalent circuits according with the Nyquist plots with different shape. It can be speculated that both the passivating film on the surface of LiCoO2 cathode and the channels for lithium ion transfer in LiCoO2 cathode are mostly formed during the first charge/discharge process. Both diffusion coefficient of lithium ion in LiCoO2 cathode and exchange current density are in accord with the analysis of the Nyquist plots of electrochemical impedance spectra, indicating the rationality of the speculation.
Exploring Differences between Charge and Discharge of LiMn 2 O 4 /Li Half-cell with Dynamic Electrochemical Impedance Spectroscopy

jun huang,jianbo zhang,zhe li,shaoling song,ningning wu

DOI: https://doi.org/10.1016/j.electacta.2014.02.030

IF: 6.6

2014-01-01

Electrochimica Acta

Abstract:•The differences between charge and discharge was explored using dynamic EIS;.•At the same SOC, Rct during charge was usually smaller than that during discharge due to surface concentration change;.•The charge transfer resistance decreased with the charging/discharging current.
Electrochemical Impedance Spectroscopy Study on Using Li10GeP2S12 Electrolyte for All-Solid-State Lithium Batteries

Hongliang Li,Tong Zhang,Zi Yang,Yueli Shi,Quanchao Zhuang,Yanhua Cui,

DOI: https://doi.org/10.20964/2021.02.33

IF: 1.541

2021-02-01

International Journal of Electrochemical Science

Abstract:The electrochemical impedance spectroscopy (EIS) technique has been widely used for analysing lithium battery systems, especially to determine kinetic and transport parameters, understand reaction mechanisms, and study capacity fade mechanisms. In this work, the initial charge-discharge process of LiCoO2@LiNbO3/Li10GeP2S12/Li (LLCO/LGPS/Li) and LiNi0.5Co0.2Mn0.3O2@LiNbO3/Li10GeP2S12/Li (LNCM523/LGPS/Li) batteries at different potentials was systematically investigated by EIS. During the lithium-ion insertion-removal process, the Nyquist plots of both LLCO/LGPS/Li and LNCM523/LGPS/Li batteries are composed of three parts, namely, two semicircles and an inclined line, which can be attributed to the interfacial impedance between the solid electrolyte and electrode, the charge transfer process, and the solid-state diffusion of the lithium-ion in the cathode with decreasing frequency, respectively. A proper equivalent circuit is proposed to fit the experimental EIS data and the variations in the interfacial resistance (Rif ) between the solid electrolytes (SEs) and electrode. The charge transfer resistance (Rct ) along with the increase or decrease in the electrode polarization potential is quantitatively analysed in detail. Based on the experimental results, it has been revealed that, the increase in Rif between the solid electrolyte and electrode may cause the capacity fade of all-solid-state batteries during charge-discharge.

electrochemistry
Application of Electrochemical Impedance Technology in Research on Lithium-Ion Batteries

WANG Li,ZHAO Ji-shi,HE Xiang-ming,JIANG Chang-yin,WAN Chun-rong

DOI: https://doi.org/10.3969/j.issn.1002-087x.2011.04.006

2011-01-01

Abstract:Electrochemical impedance spectroscopy(EIS) is one of the methods widely used in the research on electrochemistry.The application progress of EIS in study the electrochemical performance of electrode materials was reviewed,including the electrochemical lithium storage performance and lithium storage mechanisms of cathode and anode,conductivity performance and mechanisms of electrolyte,the interface reaction between electrolyte and electrode materials,the interface conductivity of lithium ion,the mechanism of deactivation of electrode materials,the cause of battery performance degradation and its forecast.The prospects of the EIS research on lithium-ion batteries were also discussed.
The Effect of Electrode-Electrolyte Interface on the Electrochemical Impedance Spectra for Positive Electrode in Li-Ion Battery

Ryoichi Tatara,Pinar Karayaylali,Yang Yu,Yirui Zhang,Livia Giordano,Filippo Maglia,Roland Jung,Jan Philipp Schmidt,Isaac Lund,Yang Shao-Horn

DOI: https://doi.org/10.1149/2.0121903jes

IF: 3.9

2018-11-27

Journal of The Electrochemical Society

Abstract:Understanding the effect of electrode-electrolyte interface (EEI) on the kinetics of electrode reaction is critical to design high-energy Li-ion batteries. While electrochemical impedance spectroscopy (EIS) is used widely to examine the kinetics of electrode reaction in Li-ion batteries, ambiguities exist in the physical origin of EIS responses for composite electrodes. In this study, we performed EIS measurement by using a three-electrode cell with a mesh-reference electrode, to avoid the effect of counter electrode impedance and artefactual responses due to asymmetric cell configuration, and composite or oxide-only working electrodes. Here we discuss the detailed assignment of impedance spectra for LiCoO2 as a function of voltage. The high-frequency semicircle was assigned to the impedance associated with ion adsorption and desorption at the electrified interface while the low-frequency semicircle was related to the charge transfer impedance associated with desolvation/solvation of lithium ions, and lithium ion intercalation/de-intercalation into/from LixCoO2. Exposure to higher charging voltages and greater hold time at high voltages led to no significant change for the high-frequency component but greater resistance and greater activation energy for the low-frequency circle. The greater charge transfer impedance was attributed to the growth of EEI layers on the charged LixCoO2 surface associated with electrolyte oxidation promoted by ethylene carbonate dehydrogenation.

electrochemistry,materials science, coatings & films
Kinetic and transport characteristics of LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries

Jinmei Xu,Pengfei Gao,Xiangyun Qiu,Hongliang Li,Quanchao Zhuang,Kai Wu,Honghe Zheng

DOI: https://doi.org/10.1016/j.ssi.2023.116216

IF: 3.699

2023-07-01

Solid State Ionics

Abstract:A balance must be found between energy density, cost and life for energy-typed lithium-ion batteries. Solving this problem requires a deep understanding of the electrode interface reaction mechanism. In this paper, electrochemical AC impedance spectroscopy (EIS) is used to study the impedance spectrum characteristics of lithium-ion batteries comprising LiNi0.8Co0.1Mn0.1O2 (NCM811) and graphite electrodes separately in a symmetrical battery system under different states of charge and temperature. The de Levie - Finite Length Pore (L s) element is used to differentiate Li+ diffusion resistance R ion inside the porous electrode and charge transfer process resistance R ct in the Faraday reaction. The dependencies of R ion and R ct on temperature and state of charge (SOC) are obtained. Based on the R ion measurements, we calculate MacMullin number (N m) and then characterize the difficulty of Li ion transportation of NCM811 and graphite electrodes in one cell. The results indicate directions for improving the power design of commercial energy-typed lithium-ion power batteries.

chemistry, physical,physics, condensed matter
Electrochemical Impedance Spectroscopy Study of Ni/Mh Batteries

SA Cheng,JQ Zhang,MH Zhao,CN Cao

DOI: https://doi.org/10.1016/s0925-8388(99)00363-1

IF: 6.2

1999-01-01

Journal of Alloys and Compounds

Abstract:An electrochemical impedance spectroscopy study of Ni/MH batteries is reported. The surface structure change of MH electrodes during activation and charge/discharge cyclings of a Ni/MH battery is discussed by fitting EIS data to an equivalent circuit. The effect of surface treatment of hydrogen storage alloys on the electrochemical parameters of the electrodes is also reported.
Electrochemical Kinetics Study of Li-ion in Cu6Sn5 Electrode of Lithium Batteries by PITT and EIS

Jing-jun Zhang,Ping He,Yong-yao Xia

DOI: https://doi.org/10.1016/j.jelechem.2008.09.003

IF: 4.598

2008-01-01

Journal of Electroanalytical Chemistry

Abstract:The kinetics of Li-ion intercalation/alloying into Cu6Sn5 electrode was determined by potentiostatic intermittent titration technique (PITT) and electrochemical impedance spectroscopy (EIS) method. Although the Li-ion diffusion coefficient (DLi) values are relatively high (from 10−11 to 10−10cm2/s) in the most voltage range, two minima (below 10−11cm2/s) in the DLi vs. voltage curve were observed at ∼0.4 and 0.1V, coinciding with the voltage plateau in the charge/discharge curves, indicating reversible structural phase transition or order/disorder transition in the compound. The DLi derived from PITT and EIS were confirmed well both in the magnitudes and in the variation within Li composition (voltage) range.
A Graphical Approach for Identifying the Limiting Processes in Lithium-Ion Battery Cathode Using Electrochemical Impedance Spectroscopy

Ruben Suarez-Hernandez,Guadalupe Ramos-Sánchez,Ilda O. Santos-Mendoza,Gregorio Guzmán-González,Ignacio González

DOI: https://doi.org/10.1149/1945-7111/ab95c7

IF: 3.9

2020-06-15

Journal of The Electrochemical Society

Abstract:Electrochemical impedance spectroscopy (EIS) has been proposed as an in situ strategy for the analysis of materials properties applied in the study of lithium-ion batteries (LIBs). However, the number and physical nature of the processes occurring simultaneously, combined with the typical interpretation of EIS spectra make the study challenging. To make the EIS interpretation more inclusive, in this work a graphical Bode diagram deconvolution is proposed, utilizing time constants τ (R-CPE), associated with relaxation of the phenomena occurring in battery composite electrodes. Since the effect of the additives on the electrode composite is still controversial and difficult to analyze for other in situ techniques, the graphical strategy is first applied to a LiFePO4 cathode with PVDF as the binder, to discriminate the contribution of each τ during different state of charge (SOC). This is done by removing the influence of counter electrode using a commercial three-electrode set-up cell. Then, the same cathode was evaluated, but with a Single Lithium-Ion Conducting Binder (SLICB). The electrode modification was easily observed with the graphical analysis. The results show that SLICB improved the speed of the processes, moving them to high frequencies, given that the polymer provides a continuous supply of ions diminishing concentration polarization.

electrochemistry,materials science, coatings & films
Dynamic evolution of Cathode−Electrolyte interface of LiNi0.6Co0.2Mn0.2O2 during the initial Charge−Discharge process

Siyang Liu,Leidanyang Wang,Congcong Zhang,Binbin Chu,Chunpeng Wang,Tao Huang,Aishui Yu

DOI: https://doi.org/10.1016/j.jpowsour.2019.226979

IF: 9.2

2019-01-01

Journal of Power Sources

Abstract:The cathode−electrolyte interface (CEI) is a key factor that affects the electrochemical performance of lithium-ion batteries. However, considerable ambiguity still exists with regard to the composition and properties of the CEI at different potentials during cycling. In this study, we investigate the dynamic evolution behavior of the CEI between the LiNi0.6Co0.2Mn0.2O2 cathode and organic carbonate electrolytes by electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and synchrotron soft X-ray absorption spectroscopy (soft XAS). XPS results reveal the continuous formation and decomposition of the CEI components during the initial charge and discharge process. Lithium alkyl carbonates and lithium fluoride (LiF) form during charging at low voltages, decompose at high voltages, and regenerate during discharging. In addition, soft XAS highlights the formation of electrochemically inactive species on the cathode surface, which generates extra barrier for Li+ diffusion and also decreases active sites for Li+ intercalation. The surface Ni undergoes incomplete oxidation during the charging process and exhibits partial reduction after discharging. These results are consistent with impedance variation in the first cycle and morphology changes on the cathode surface. These findings underscore the value of investigating and regulating the interfacial properties of lithium-ion batteries.
Revisiting the Electrochemical Impedance Spectroscopy of Porous Electrodes in Li‐ion Batteries by Employing Reference Electrode

Lei Xu,Ye Xiao,Zhi-Xian Yu,Yi Yang,Chong Yan,Jia-Qi Huang

DOI: https://doi.org/10.1002/anie.202406054

2024-07-11

Angewandte Chemie International Edition

Abstract:Electrochemical impedance spectroscopy (EIS), characterized by its non-destructive and in-situ nature, plays a crucial role in comprehending the thermodynamic and kinetic processes occurring with Li-ion batteries. However, there is a lack of consistent and coherent physical interpretations for the EIS of porous electrodes. Therefore, it is imperative to conduct thorough investigations into the underlying physical mechanisms of EIS. Herein, by employing reference electrode in batteries, we revisit the associated physical interpretation of EIS at different frequency. Combining different battery configurations, temperature-dependent experiments, and elaborated distribution of relaxation time analysis, we find that the ion transport in porous electrode channels and pseudo-capacitance behavior dominate the high-frequency and mid-frequency impedance arcs, respectively. This work offers a perspective for the physical interpretation of EIS and also sheds light on the understanding of EIS characteristics in other advanced energy storage systems.

chemistry, multidisciplinary
Electrochemical Impedance Study of Li-Ion Insertion into the Raw Acid-Oxidized Carbon Nanotubes

ZH Yang,SB Sang,Y Feng,YH Zhou,KL Huang,HQ Wu

DOI: https://doi.org/10.1016/j.diamond.2004.12.045

IF: 3.806

2005-01-01

Diamond and Related Materials

Abstract:Electrochemical impedance spectroscopy (EIS) was applied for the raw acid-oxidized multiwall carbon nanotubes during Li-ion insertion with the electrolyte of 1M LiPF6 in EC and DMC. Impedance spectroscopy consists of two separated arcs in the high and intermediate range frequency. The high frequency arc is attributed to Li migration within the surface films and the medium frequency arc is associated with the charge transfer. Obtained spectra were analyzed with an equivalent circuit model. Kinetic parameters such as the charge transfer resistance, film resistance, diffusion coefficient and exchange current were evaluated. The contribution of the film to the measured impedance response is discussed.
Impedance studies of LiMn0.8Fe0.2PO4/C cathodes for lithium-ion batteries

Lei Zhang,Xuping Zhang,Li Wang,Quanchao Zhuang,Zhicheng Ju,Yanhua Cui,Lei Zhang,Xuping Zhang,Li Wang,Quanchao Zhuang,Zhicheng Ju,Yanhua Cui

DOI: https://doi.org/10.1007/s11581-021-04248-x

IF: 2.961

2021-09-03

Ionics

Abstract:LiMn0.8Fe0.2PO4 by coating with carbon and reducing the particle size to nanometric scale can be used as a superb cathode material for lithium-ion batteries. In this study, LiMn0.8Fe0.2PO4/C composite is synthesized by high-energy milling method, and the charge and discharge test results show that it has high capacity and good cycle stability. The electrochemical impedance spectra (EIS) of LiMn0.8Fe0.2PO4/C cathodes are obtained in the initial lithiation and delithiation process. It is found that the Nyquist plots of LiMn0.8Fe0.2PO4/C cathodes mainly consist of three parts in the lithiation and delithiation process, namely, high-frequency semicircle, middle-frequency semicircle, and low-frequency line. The above three parts are assigned to Schotty contact problem, charge transfer step, and lithium-ion solid-state diffusion process, respectively. A quantitative analysis of the variations of the resistance and barrier capacitance of Schotty contact with the polarization potential of the electrode and a reasonable explanation is given, as well as the resistance and space charge layer capacitance of charge transfer. Moreover, the change of n (a parameter in constant phase angle element (CPE) with a value between − 1 and 1) value is briefly discussed.

chemistry, physical,physics, condensed matter,electrochemistry
Mechanistic Study of Lithium Electrodeposition Using Dynamic Electrochemical Impedance Spectroscopy

Robert L Sacci,Ritu Sahore,Andrew S Westover

DOI: https://doi.org/10.1149/ma2023-01442400mtgabs

2023-08-28

ECS Meeting Abstracts

Abstract:Lithium metal batteries have increased energy density over standard graphite-based Li-ion anodes. However, Li metal anodes have difficulty forming stable passivation layer (called solid electrolyte interphase, SEI) leading to poor use of Li inventory. That is, LI metals require larger cathode loading, which reduces the energy density gain. A holistic approach to Li anode incorporation includes electrolyte design, mechanism understanding, and battery engineering. A factor that has not been fully appreciated is the nature of the Lithium metal itself, namely its SEI before incorporation into the battery device may affect the subsequent SEI formation. Here, we present a mechanistic study on lithium SEI formation on various lithium sources, as well as the Li cycling. We utilized dynamic impedance spectroscopy (dEIS) to probe the formation and evolution of the SEI during Li cycling of various Li sources. dEIS superimposes a multisine waveform atop the dc stimulus signal. After applying a sliding window FFT protocol that takes the complex ratio of the measured potential and current signals time-resolved complex impedance can be obtained. We will discuss the differences between the Li cycling profiles using Lipon (a glassy solid electrolyte) and a liquid electrolyte. We will relate the differences in cycling performance, particularly the SEI evolution to the surface chemistry of the as-received Li metal source. The US Department of Energy's Energy Efficiency and Renewable Energy Vehicles Technologies Office provided funding for this work under the US-German Cooperation on Energy Storage: Lithium-Solid-Electrolyte Interfaces program.
Electrochemical impedance spectroscopy characterization and parameterization of lithium nickel manganese cobalt oxide pouch cells: dependency analysis of temperature and state of charge

Rahul Gopalakrishnan,Yi Li,Jelle Smekens,Ahmed Barhoum,Guy Van Assche,Noshin Omar,Joeri Van Mierlo

DOI: https://doi.org/10.1007/s11581-018-2595-2

IF: 2.961

2018-06-01

Ionics

Abstract:Characterizing lithium-ion batteries is of prime importance as it helps in understanding the safety, working temperature, voltage range, and power capabilities. Based on these results, we can then choose operating conditions which include safety protocols, application, and working environment. In this study, EIS studies of commercially available 20-Ah lithium-ion battery and a 28-Ah prototype cell with nickel manganese cobalt oxide (NMC)/graphite chemistry are used to determine the contribution of temperature and state of charge (SoC) towards the electrochemical impedance spectroscopy. These cells are manufactured for electric vehicle (EV) application. The electrode structure, particle size, stacking of the electrodes, and other entities for both the cells are provided to compare the similarities and differences between both the cells. Equivalent circuit modeling is used to analyze and comprehend the variation in impedance spectrum obtained for both the cells. It is observed that the ohmic resistance varies with both temperature and SoC and the variation with temperature is more significant for the prototype cell. The prototype cell showed better charge-transfer characteristics at lower temperatures when compared to the commercial cell.

chemistry, physical,physics, condensed matter,electrochemistry
Dynamic Electrochemical Impedance Spectroscopy of a Three-Electrode Lithium-Ion Battery during Pulse Charge and Discharge

jun huang,hao ge,zhe li,jianbo zhang

DOI: https://doi.org/10.1016/j.electacta.2015.07.017

IF: 6.6

2015-01-01

Electrochimica Acta

Abstract:•Dynamic EIS is performed on a three-electrode pouch cell;•Charge transfer resistance during insertion is generally larger than that during deinsertion due to the surface concentration change;•An inductive behavior is revealed at low frequencies due to the violation of stationary condition in DEIS measurement;•Electrochemical models of a single active particle in both time and frequency domain are developed.•The model predicts a positive correlation between the lower frequency limit and the DC current.
Equivalent circuit model analysis on electrochemical impedance spectroscopy of lithium metal batteries

Peng Gao,Cuifen Zhang,Guangwu Wen

DOI: https://doi.org/10.1016/j.jpowsour.2015.06.032

IF: 9.2

2015-10-01

Journal of Power Sources

Abstract:Lithium metal electrode is pretreated with 1,3-dioxolane or 1,4-dioxane to improve its properties. The components and morphology of the surface films formed in the above two pretreatment liquids are studied using FTIR and SEM respectively. Li–LiCoO2 coin cells are then fabricated and their cycle and discharge performance are tested. It is found that the battery performance is greatly improved by such pretreatment. Interestingly, the 1,4-dioxane pretreatment is more effective than 1,3-dioxolane in improving the lithium metal electrode performance. To explore the mechanism(s) behind, the electrochemical impedance spectroscopy (EIS) is employed and an equivalent circuit model is designed for EIS analysis. The fitting curves are aligned well with the experimental curves, suggesting that the proposed equivalent circuit model is an ideal model for lithium battery. Next, the corresponding relationship between the impedance components and every individual semicircle in the Nyquist curves is inferred theoretically and the result is satisfying. Based on the analysis using this model, we conclude that the structural stability of SEI film is increased and the interfacial compatibility between the lithium substrate and the SEI film is improved by 1,3-dioxolane or 1,4-dioxane pretreatment.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Impedance analysis of a lithium-ion battery using the electrochemical impedance spectroscopy

Hugo Nunes,M. Calado,J. Martinho,J. Pombo,S. Mariano,J. Fermeiro

DOI: https://doi.org/10.1109/EEEIC/ICPSEurope54979.2022.9854629

2022-06-28

Abstract:This paper analyzes the lithium-ion (Li-ion) batteries impedance using electrochemical impedance spectroscopy (EIS) technique. Firstly, the influence of the temperature, state of charge (SOC) and number of charging/discharging cycles on the impedance spectrum was studied. Nyquist graphs were used to perform this analysis. Subsequently, an equivalent electrical model was used to characterize the battery behavior under study at different operating conditions. Specifically, the model parameters were estimated using a non-linear least square method, allowing the consequent estimation of the impedance spectra obtained by the EIS technique. The experimental study included three temperature levels, five SOCs and different number of charging/discharging cycles. The results showed that the impedance depends considerably on the factors under consideration. Furthermore, the model used accurately estimated different impedance spectra.

Materials Science,Engineering,Chemistry

Electrochemical Impedance Spectroscopy (EIS) Study of LiNi1/3Co1...

Electrochemical Impedance Spectroscopy (eis) Study of Lini1/3co1/3mn1/3o2 for Li-Ion Batteries

Kinetic Investigation of LiCoO2 by Electrochemical Impedance Spectroscopy (EIS)

Exploring Differences between Charge and Discharge of LiMn 2 O 4 /Li Half-cell with Dynamic Electrochemical Impedance Spectroscopy

Electrochemical Impedance Spectroscopy Study on Using Li10GeP2S12 Electrolyte for All-Solid-State Lithium Batteries

Application of Electrochemical Impedance Technology in Research on Lithium-Ion Batteries

The Effect of Electrode-Electrolyte Interface on the Electrochemical Impedance Spectra for Positive Electrode in Li-Ion Battery

Kinetic and transport characteristics of LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries

Electrochemical Impedance Spectroscopy Study of Ni/Mh Batteries

Electrochemical Kinetics Study of Li-ion in Cu6Sn5 Electrode of Lithium Batteries by PITT and EIS

A Graphical Approach for Identifying the Limiting Processes in Lithium-Ion Battery Cathode Using Electrochemical Impedance Spectroscopy

Dynamic evolution of Cathode−Electrolyte interface of LiNi0.6Co0.2Mn0.2O2 during the initial Charge−Discharge process

Revisiting the Electrochemical Impedance Spectroscopy of Porous Electrodes in Li‐ion Batteries by Employing Reference Electrode

Electrochemical Impedance Study of Li-Ion Insertion into the Raw Acid-Oxidized Carbon Nanotubes

Impedance studies of LiMn0.8Fe0.2PO4/C cathodes for lithium-ion batteries

Mechanistic Study of Lithium Electrodeposition Using Dynamic Electrochemical Impedance Spectroscopy

Electrochemical impedance spectroscopy characterization and parameterization of lithium nickel manganese cobalt oxide pouch cells: dependency analysis of temperature and state of charge

Dynamic Electrochemical Impedance Spectroscopy of a Three-Electrode Lithium-Ion Battery during Pulse Charge and Discharge

Equivalent circuit model analysis on electrochemical impedance spectroscopy of lithium metal batteries

Impedance analysis of a lithium-ion battery using the electrochemical impedance spectroscopy