Abstract:To meet the increasing energy demands of portable devices and electric vehicles, high-nickel lithium-ion cathode materials with the general formula Li(Ni x Mn y Co z )O 2 (NMC) have been extensively researched. Currently NMC811 is used commercially for high-energy applications. The energy density of NMC also comes with concerns over cycle life and safety 1,2 . To improve the cycle life of NMC-based cells, single-crystal materials have recently gained attention to tackle the particle cracking issues found in polycrystalline cathodes 3 . However, for successful introduction to the lithium-ion battery market, inherent safety over a material's lifetime also needs to be proven. Failure and degradation mechanisms both need to be fully understood to improve the stability of future cathode materials. Abusive testing, such as overheating, overcharge and nail penetration, has been used in conjunction with in-situ and ex-situ X-ray computed tomography (CT) 3D imaging to perform post-mortem studies and understand the relationship between thermal failure and cathode microstructure 4,5 . However, the interplay between safety characteristics, microstructural properties and material degradation remains unclear. This work first aims to compare the safety performance of polycrystalline and single-crystal NMC811 in 200 mAh pouch cells. Accelerating rate calorimetry (ARC) with a heat-wait-search (HWS) technique is used to heat cells and determine the onset of self-heating, onset of thermal runaway and the peak thermal runaway temperature. Laboratory-based pre- and post-mortem in-situ and ex-situ X-ray CT is also used for non-destructive imaging at multiple length scales to determine how failure propagates through the cells and the impacts on the electrodes and microstructure. Pouch cells containing polycrystalline and single-crystal NMC811 cathode and graphite anode are electrochemically cycled to induce material degradation. EIS measurements and diagnostic cycles are performed to identify prevalent degradation modes in both types of cathode materials. Finally, the same ARC and X-ray CT characterisations are performed on the aged cells to determine how degradation and changes to the material structure affect the safety performance in high-nickel cathode materials. The results of this work will improve the current understanding of capacity fade in high-nickel cathodes and the safety behaviour over the lifetime of a battery cell. This information can then be used to inform future materials development and strategies for mitigating thermal runaway in batteries. References L. Ma, M. Nie, J. Xia, and J. R. Dahn, J. Power Sources, 327, 145–150 (2016). H. J. Noh, S. Youn, C. S. Yoon, and Y. K. Sun, J. Power Sources, 233, 121–130 (2013). J. Langdon and A. Manthiram, Energy Storage Mater., 37, 143–160 (2021). D. Patel, J. B. Robinson, S. Ball, and D. J. L. Brett, (2020). D. P. Finegan et al., Phys. Chem. Chem. Phys., 18, 30912–30919 (2016).

The Thermal Stabilities of Li-Ion Batteries with Nickel-Rich Cathode: Effects of Cathode Morphology and State of Health

Correlation between thermal stabilities of nickel‐rich cathode materials and battery thermal runaway

Experimental Study on Effect of State of Charge on Thermal Runaway Characteristics of Commercial Large-Format NCM811 Lithium-Ion Battery

Revealing the origin of high-thermal-stability of single-crystal Ni-rich cathodes toward higher-safety batteries

Early-stage Latent Thermal Failure of Single-Crystal Ni-rich Layered Cathode

Effect of Crystal Morphology of Ultrahigh-Nickel Cathode Materials on High Temperature Electrochemical Stability of Lithium Ion Batteries

Effect of the grain arrangements on the thermal stability of polycrystalline nickel-rich lithium-based battery cathodes

Simulation Study on Thermal Runaway of Lithiumion Batteries in Different Aging States

Safety Issues of Layered Nickel-Based Cathode Materials for Lithium-Ion Batteries: Origin, Strategies and Prospects

Investigating the Thermal Runaway Mechanisms of Lithium-Ion Batteries Based on Thermal Analysis Database

A Comparative Investigation of Aging Effects on Thermal Runaway Behavior of Lithium-Ion Batteries

Study on Thermal Stability of Nickel-Rich/silicon-graphite Large Capacity Lithium Ion Battery

Thermal runaway mechanism of lithium-ion battery with LiNi0.8Mn0.1Co0.1O2 cathode materials

Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries

Experimental Study on Thermal-Induced Runaway in High Nickel Ternary Batteries

Thermal stress-induced charge and structure heterogeneity in emerging cathode materials

(Digital Presentation) Understanding the Impact of High-Nickel Cathode Microstructure on Battery Safety and Cycling Performance

Progress of thermal safety characteristics of high power lithium-ion batteries

Thermal Analysis of Nickel Cobalt Lithium Manganese with Varying Nickel Content Used for Lithium Ion Batteries

Toxicity, Emissions and Structural Damage from Lithium-Ion Battery Thermal Runaway

The Hazards Analysis of Nickel-Rich Lithium-Ion Battery Thermal Runaway under Different States of Charge