Performance of the solar/peroxymonosulfate process in (waste)water treatment: Abatement of micropollutants, roles of reactive oxygen species, and formation of disinfection by-products
Chaoqun Tan,Ying Shen,Xinchi Jian,Suqian Xu,Lin Deng,Huan He,Xinhua Min,Ming Chen
DOI: https://doi.org/10.1039/d2ew00717g
2022-11-15
Environmental Science: Water Research and Technology
Abstract:This study investigated the effectiveness of peroxymonosulfate (PMS) as an oxidative agent in micro-contaminant removal with activation via simulated solar irradiation (Xe-lamp, emission spectrum ranging from 300 to 800 nm). During solar/PMS treatment, the abatement of nitrobenzene (NB) and flunixin meglumine (FMME), aspirin (ASA), and benzoic (BA) followed pseudo-first order kinetics, with degradation kinetics at pH 8.5 faster (1.28-1.78 times) than that at pH 5.5. The removal rates of NB, FMME, ASA, and BA with initial concentrations of 10.0 μΜ achieved 51.2%, 68.0%, 66.6%, and 90.7% in 15 min at pH 8.5, respectively, with corresponding pseudo-first order rate constants (kobs) of 5.1×10-2, 7.7×10-2, 7.4×10-2, and 1.6×10-1 min-1, respectively. Production of hydroxyl radicals, sulfate radicals (SO4·-), and other reactive oxygen species (ROS) were determined by using NB and BA as probe compounds in the solar/PMS system. At pH of 5.5-8.5, SO4·- made a dominant contribution (45.7% and 52.0%, respectively) to the overall removal of ASA and FMME. Compared with treatment of chlorination alone, solar/PMS pretreatment followed with post-chlorination resulted in significant increase in disinfection by-products (DBPs) formation (by 176% for trihalomethanes and 273% for haloacetic acids) in the Yangtze River water samples, as well as inhibition of algae growth (by 35.6%) due to higher toxic effects of residual PMS or potential oxidizing intermediates in the system. The lowest EE/Ototal consumed in the solar/PMS system was estimated as 72-110 kWh·m-3·order-1 with the optimal PMS dosages as 0.36-0.68 mM. This work illuminated that solar/PMS pre-oxidation is an efficient and cost-effective application for depletion of organic micro-pollutants, while potential risk of increased DBPs production and bio-toxicity should also be considered when applying the system to practical water treatment.