Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Modularity techniques in high performance permanent magnet machines and applications

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Performance Analysis of DC-Biased Modular Linear Variable Flux Reluctance Machines

Comparison of Modular Dual 3-phase PM Machines with Overlapping/Non-overlapping Windings

Comparative Study of Modular Dual 3-phase Permanent Magnet Machines with Overlapping/Non-overlapping Windings

Investigation of a Modular Linear Doubly Salient Machine with Dual-PM in Primary Yoke and Slot Openings

Comparison of Dual 3-Phase Modular Permanent Magnet Machines with Overlapping/Non-overlapping Windings and Redundancy

Novel Single-Phase Short-Stroke Tubular Permanent Magnet Oscillating Machines with Partitioned Stator

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Electromagnetic Performance Analysis and Optimal Design of Modular Machine with Halbach Permanent-Magnet Array

Design,Analysis and Experimental Validation of a Modular Permanent-Magnet Machine

High-speed Permanent Magnet Electrical Machines — Applications, Key Issues and Challenges

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

State-of-the-Art Lightweight Implementation Methods in Electrical Machines

Generic Slot and Pole Number Combinations for Novel Modular Permanent Magnet Dual 3-Phase Machines With Redundant Teeth

Design of a Multi-Power-terminals Permanent Magnet Machine with Magnetic Field Modulation

Design and Experimental Study of Permanent Magnet Machines with Magnetic Field Modulation

Manufacturing Process and Key Technology of High-Speed Permanent Magnet Electric Machine

Permanent magnet flux switching machines — Topologies, analysis and optimization