Abstract:Pharmaceutical pollutants, a group of emerging contaminants, have attracted outstanding attention in recent years, and their removal from aquatic environments has been addressed. In the current study, a new sponge-based moving bed biofilm reactor (MBBR) was developed to remove chemical oxygen demand (COD) and the pharmaceutical compound Ibuprofen (IBU). A 30-L pilot scale MBBR was constructed, which was continuously fed from the effluent of the first clarifier of the Southern Tehran wastewater treatment plant. The controlled operational parameters were pH in the natural range, Dissolved Oxygen of 1.5-2 mg/L, average suspended mixed liquor suspended solids (MLSS), and mixed liquor volatile suspended solids (MLVSS) of 1.68 ± 0.1 g/L and 1.48 ± 0.1 g/L, respectively. The effect of hydraulic retention time (HRT) (5 h, 10 h, 15 h), filling ratio (10%, 20%, 30%), and initial IBU concentration (2 mg/L, 5 mg/L, 10 mg/L) on removal efficiencies was assessed. The findings of this study revealed a COD removal efficiency ranging from 48.9 to 96.7%, with the best removal efficiency observed at an HRT of 10 h, a filling ratio of 20%, and an initial IBU concentration of 2 mg/L. Simultaneously, the IBU removal rate ranged from 25 to 92.7%, with the highest removal efficiency observed under the same HRT and filling ratio, albeit with an initial IBU concentration of 5 mg/L. An extension of HRT from 5 to 10 h significantly improved both COD and IBU removal. However, further extension from 10 to 15 h slightly enhanced the removal efficiency of COD and IBU, and even in some cases, removal efficiency decreased. Based on the obtained results, 20% of the filling ratio was chosen as the optimum state. Increasing the initial concentration of IBU from 2 to 5 mg/L generally improved COD and IBU removal, whereas an increase from 5 to 10 mg/L caused a decline in COD and IBU removal. This study also optimized the reactor's efficiency for COD and IBU removal by using response surface methodology (RSM) with independent variables of HRT, filling ratio, and initial IBU concentration. In this regard, the quadratic model was found to be significant. Utilizing the central composite design (CCD), the optimal operating parameters at an HRT of 10 h, a filling ratio of 21%, and an initial IBU concentration of 3 mg/L were pinpointed, achieving the highest COD and IBU removal efficiencies. The present study demonstrated that sponge-based MBBR stands out as a promising technology for COD and IBU removal.

Specific microbial diversity and functional gene (AOB amoA) analysis of a sponge-based aerobic nitrifying moving bed biofilm reactor exposed to typical pharmaceuticals.

Performance of Novel Sponge Biocarrier in MBBR Treating Recirculating Aquaculture Systems Wastewater: Microbial Community and Kinetic Study.

Impacts of Typical Pharmaceuticals and Personal Care Products on the Performance and Microbial Community of a Sponge-Based Moving Bed Biofilm Reactor.

Responses of biofilm communities in a hybrid moving bed biofilm reactor-membrane bioreactor system to sulfadiazine antibiotic exposure

Unravelling Kinetic and Microbial Responses of Enriched Nitrifying Sludge under Long-Term Exposure of Cephalexin and Sulfadiazine

Insight into the Nitrification Kinetics and Microbial Response of an Enriched Nitrifying Sludge in the Biodegradation of Sulfadiazine.

Combined use of strictly anaerobic MBBR and aerobic MBR for municipal wastewater treatment and removal of pharmaceuticals

Removal of sulfamethoxazole in an algal-bacterial membrane aerated biofilm reactor: Microbial responses and antibiotic resistance genes

Effects of High Pharmaceutical Concentrations in Domestic Wastewater on Membrane Bioreactor Treatment Systems: Performance and Microbial Community

Sulfamethoxazole Removal in Nitrifying Membrane Aerated Biofilms: Physiological Responses and Antibiotic Resistance Genes

Unraveling the potential of a combined nitritation-anammox biomass towards the biodegradation of pharmaceutically active compounds

Total and Metabolically Active Microbial Community of Aerobic Granular Sludge Systems Operated in Sequential Batch Reactors: Effect of Pharmaceutical Compounds

Enhanced Antibiotic Removal in a Nitrifying Sludge System by Ammonia-Oxidizing Bacteria and Heterotrophs

Analyzing microbial communities and their biodegradation of multiple pharmaceuticals in membrane bioreactors

Performance, microbial community, and metabolism pathway in adsorption-biological coupling reactor treating sulfonamide antibiotics wastewater: Effect of influent frequency and aeration rate

Responses of the microbial community and the production of extracellular polymeric substances to sulfamethazine shocks in a novel two-stage biological contact oxidation system

Performance evaluation of a new sponge-based moving bed biofilm reactor for the removal of pharmaceutical pollutants from real wastewater

Microbial Community Compositional Analysis for Membrane Bioreactor Treating Antibiotics Containing Wastewater

Can different inoculum sources influence the biodegradation of sulfamethoxazole antibiotic during anaerobic digestion?

Influence of organic loading rate on ciprofloxacin and sulfamethoxazole biodegradation in anaerobic fixed bed biofilm reactors

Metabolism of nitrogen and sulfamethoxazole, performance recovery mechanism, and antibiotic resistance genes (ARGs) behaviors in membrane aerated biofilm reactor (MABR)