Abstract:Most recently, the continuous deterioration of the aquatic environment triggered by both heavy metals and synthetic organic dyes has imparted serious threats to the ecosphere and drinking water safety. However, it is still extremely challenging to treat complex wastewater containing these two classes of pollutants via a one-step method owing to the significant differences in their physicochemical properties. In the current work, versatile magnetic MWCNTs decorated with PEI (denoted as MWCNTs@Fe3O4/PEI) was fabricated by a facile, rapid and reproducible strategy and applied to as a robust adsorbent for simultaneously removing methyl orange (MO) and Cr(vi) from aqueous solutions. The physicochemical properties of the as-designed nanohybrid were investigated using various analytical techniques, i.e. XRD, FT-IR, SEM, TEM, VSM, zeta potential, etc. It was found that the surface charge properties of the MWCNTs as well as its dispersion in aqueous solution were greatly changed after the introduction of PEI molecules. The resulting nanohybrid exhibited attractive adsorption capabilities toward anionic MO and Cr(vi). In the perspective of a mono-pollutant system, the time-dependent adsorption process matched well with a pseudo-second-order kinetics equation, the adsorption isotherm data at r.t. were well fitted by a Langmuir model with maximum monolayer uptake capacity of 1727.6 mg g-1 for MO and 98.8 mg g-1 for Cr(vi), and the removal process of both pollutants was thermodynamically spontaneous and exothermic. In the MO-Cr(vi) binary system, the uptake of Cr(vi) by the as-prepared adsorbent was evidently enhanced by the presence of MO, while the coexisting Cr(vi) exerted a small negative effect on the sorption of MO; which was attributed to the different adsorption mechanisms of both pollutants on the as-recommend adsorbent. The much better adsorbing performance of the resulting MWCNTs@Fe3O4/PEI for MO and Cr(vi) than that of the pristine MWCNTs or the MWCNTs/Fe3O4 composite was mainly ascribed to the high surface area of the MWCNTs, the high density of protonated N-rich groups of PEI as well as the excellent dispersion and solubility of the resulting nanocomposites. Moreover, the obtained nanohybrids can be easily recovered after being used by a permanent magnet and still retained high stability and excellent reusability after consecutive adsorption-desorption cycles, implying its great potential in practical applications. Therefore, the as-fabricated MWCNTs@Fe3O4/PEI composite could be recommended as a promising candidate adsorbent for the simultaneous capture of MO and Cr(vi) from complex wastewater via multiple uptake mechanisms (e.g. electrostatic attraction, π-π stacking and hydrogen bonding).

Three Dimensional Flower-Like Magnetic Polyethyleneimine@mos2 Composites for Highly Efficient Removal of Cr(VI) and Pb(II) Ions.

Preparation of polyethyleneimine modification of flower molybdenum disulfide composite(PEI/MoS2) adsorbent and studying it enriched and reduction property for hexavalent chromium from wastewater

Highly effective remediation of Pb(II) and Hg(II) contaminated wastewater and soil by flower-like magnetic MoS2 nanohybrid

A Millimeter-Sized Negatively Charged Polymer Embedded with Molybdenum Disulfide Nanosheets for Efficient Removal of Pb(II) from Aqueous Solution

Polymer-microsphere coated with MoS 2 nanoflowers for the removal of Pb(II) from water: Polydopamine-mediated MoS 2 assembly and efficient Pb(II) adsorption

Highly effective and selective removal of lead ions by polymer-grafted silica-coated acid-resistant magnetic chitosan composites

Mechanochemical preparation of ternary polyethyleneimine modified magnetic illite/smectite nanocomposite for removal of Cr(VI) in aqueous solution

Polypyrrole Coated Molybdenum Disulfide Composites As Adsorbent for Enhanced Removal of Cr(VI) in Aqueous Solutions by Adsorption Combined with Reduction

Magnetic iron-based waterworks sludge modified by chitosan and FeS for aqueous Cr(vi) adsorption and reduction

Nanomagnetic Polyhedral Oligomeric Silsesquioxanes Composite Derived Sulfur-Containing Adsorbents for Effective Elimination of Hexavalent Chromium and Organic Cationic Dyes from Water

Simultaneous Capture of Methyl Orange and Chromium(vi) from Complex Wastewater Using Polyethylenimine Cation Decorated Magnetic Carbon Nanotubes As a Recyclable Adsorbent

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Enhanced removal of Pb 2+ and Congo red from aqueous solutions using hierarchically porous melamine sponge/polyvinyl alcohol/Zr-MOF composites

Synthesis of Molybdenum Disulfide/reduced Graphene Oxide Composites for Effective Removal of Pb(II) from Aqueous Solutions.

Polyethylene glycol modified magnetic nanoparticles for removal of heavy metal ions from aqueous solutions

Enhanced sorption and reduction of Cr(VI) by the flowerlike nanocomposites combined with molybdenum disulphide and polypyrrole

Simultaneous and Efficient Removal of Multiple Heavy Metal(loid)s from Aqueous Solutions Using Fe/Mn (hydr)oxide and Phosphate Mineral Composites Synthesized by Regulating the Proportion of Fe(II), Fe(III), Mn(II) and PO43.

Simultaneous Redox Transformation and Removal of Cr(Ⅵ) and As(Ⅲ) by Polyethyleneimine Modified Magnetic Mesoporous Polydopamine Nanocomposite: Insights into Synergistic Effects and Mechanisms

Synthesis of Magnetic Graphene Nanocomposites Decorated with Ionic Liquids for Fast Lead Ion Removal.

Magnetite@poly(p-phenylenediamine) core–shell composite modified with salicylaldehyde for adsorption and separation of Mn (VII) from polluted water

Preparation of Chitosan-Graft-Polyacrylamide Magnetic Composite Microspheres for Enhanced Selective Removal of Mercury Ions from Water