Abstract:Abstract Objective. This paper describes the development and validation of a GPU-accelerated Monte Carlo (MC) dose computing module dedicated to organ dose calculations of individual patients undergoing nuclear medicine (NM) internal radiation exposures involving PET/CT examination. Approach . This new module extends the more-than-10-years-long ARCHER project that developed a GPU-accelerated MC dose engine by adding dedicated NM source-definition features. To validate the code, we compared dose distributions from the point ion source, including 18 F, 11 C, 15 O, and 68 Ga, calculated for a water phantom against a well-tested MC code, GATE. To demonstrate the clinical utility and advantage of ARCHER-NM, one set of 18 F-FDG PET/CT data for an adult male NM patient is calculated using the new code. Radiosensitive organs in the CT dataset are segmented using a CNN-based tool called DeepViewer. The PET image intensity maps are converted to radioactivity distributions to allow for MC radiation transport dose calculations at the voxel level. The dose rate maps and corresponding statistical uncertainties were calculated at the acquisition time of PET image. Main results. The water-phantom results show excellent agreement, suggesting that the radiation physics module in the new NM code is adequate. The dose rate results of the 18 F-FDG PET imaging patient show that ARCHER-NM’s results agree very well with those of the GATE within −2.45% to 2.58% (for a total of 28 organs considered in this study). Most impressively, ARCHER-NM obtains such results in 22 s while it takes GATE about 180 min for the same number of 5 × 10 8 simulated decay events. Significance. This is the first study presenting GPU-accelerated patient-specific MC internal radiation dose rate calculations for clinically realistic 18 F-FDG PET/CT imaging case involving autosegmentation of whole-body PET/CT images. This study suggests that the proposed computing tools—ARCHER-NM— are accurate and fast enough for routine internal dosimetry in NM clinics.

Archer, A New Monte Carlo Software Tool for Emerging Heterogeneous Computing Environments

Status of archer — a monte carlo code for the high-performance heterogeneous platforms involving gpu and mic

Heterogeneous Concurrent Execution of Monte Carlo Photon Transport on CPU, GPU and MIC

GPU-Accelerated Monte Carlo Electron Transport Methods: Development and Application for Radiation Dose Calculations Using Six GPU cards

Multiphysics Computing of Challenging Antenna Arrays under a Supercomputer Framework

Modeling of Radiotherapy Linac Source Terms Using ARCHER Monte Carlo Code: Performance Comparison for GPU and MIC Parallel Computing Devices

SU‐F‐BRD‐02: Application of ARCHERRT‐‐ A GPU‐Based Monte Carlo Dose Engine for Radiation Therapy ‐‐ to Tomotherapy and Patient‐Independent IMRT

EVALUATION OF VECTORIZED MONTE CARLO ALGORITHMS ON GPUS FOR A NEUTRON EIGENVALUE PROBLEM

Comparison of Two Accelerators for Monte Carlo Radiation Transport Calculations, NVIDIA Tesla M2090 GPU and Intel Xeon Phi 5110p Coprocessor: A Case Study for X-ray CT Imaging Dose Calculation

ARCHER - a New Three-Dimensional Method of Characteristics Neutron Transport Code for Pebble-bed HTR with Coarse Mesh Finite Difference Acceleration

High-Fidelity Neutron Transport Solution of High Temperature Gas-Cooled Reactor by Three-Dimensional Linear Source Method of Characteristics

Performance Study of Monte Carlo Codes on Xeon Phi Coprocessors — Testing MCNP 6.1 and Profiling ARCHER Geometry Module on the FS7ONNi Problem

Development of a GPU-accelerated Monte Carlo dose calculation module for nuclear medicine, ARCHER-NM: demonstration for a PET/CT imaging procedure

Scalable and massively parallel Monte Carlo photon transport simulations for heterogeneous computing platforms

Mapping the Sbr and Tw-Ildcs to Heterogeneous Cpu-Gpu Architecture for Fast Computation of Electromagnetic Scattering

The Deterministic Neutron Transport Calculation for the HTR-PM by the Three-Dimensional Method of Characteristics Code ARCHER

THUBrachy: fast Monte Carlo dose calculation tool accelerated by heterogeneous hardware for high-dose-rate brachytherapy

Efficient Algorithms for Monte Carlo Particle Transport on AI Accelerator Hardware

Next Generation Computational Tools for the Modeling and Design of Particle Accelerators at Exascale

Toward real-time Monte Carlo simulation using a commercial cloud computing infrastructure

Matrix-free approaches for GPU acceleration of a high-order finite element hydrodynamics application using MFEM, Umpire, and RAJA