Abstract:As potential CO2 adsorbents, carbon materials have recently gained attention because of their low energy penalty, abundant sources and good stability. In this study, the response surface methodology (RSM) was used to guide the pitch-based activated carbon preparation and CO2 adsorption at different temperatures. Based on this experimental design, the correlations of CO2 uptakes at different temperatures, as well as the coupling effects of the preparation conditions on CO2 uptake, were analyzed by mathematical modelling. The obtained optimal carbon sample AC650-1.25-2.5 showed a high atmospheric CO2 uptake of 3.15(±0.14), 2.05(±0.02), and 1.37(±0.11) mmol/g at 25 °C, 50 °C, and 75 °C, respectively. Furthermore, the analysis of variance confirmed that the key factor to determine CO2 uptake at 25 °C was the activator ratio, contributing to 77.8 % of the total variance; however, it gradually shifted to the activation temperature and its coupling effect with other factors for CO2 uptake at 75 °C. The linear regression and significance test of CO2 uptakes showed that using CO2 uptake at 25 °C to predict the uptake at 50 °C was feasible; however, it failed to work when predicting the CO2 uptake at 75 °C. The good linear relationship of CO2 uptakes at similar adsorption temperatures benefited from the existence of sharable effective pore width. It was also concluded that the strict requirement for extremely narrow ultra-micropores led to the non-coincidence of suitable preparation conditions, corresponding to a good CO2 uptake at different adsorption temperatures; this further led to the bad predictability when the adsorption temperature varied greatly.

Study on Radon Adsorption of Activated Carbon in Low Temperature Condition

The Temperature Dependence of Adsorption Coefficients of 222rn on Activated Charcoal: an Experimental Study.

Study on the radon adsorption capability of low-background activated carbon

A Study on the radon removal performance of low background activated carbon

Radon Dynamic Adsorption Coefficients of Two Activated Charcoals at Different Temperatures in Nitrogen Environment.

Preparation and characterization of a high-efficiency radon adsorbing material based on activated carbon modified by water immersion and freeze–thaw

An Experimental Study on Radon Adsorption Ability and Microstructure of Activated Carbon

Investigation of the effect of the key pore size on the radon adsorption performance by combining grand canonical Monte Carlo and activated carbon modification experiments

Study of radon reduction in gases for rare event search experiments

Characteristics and Mechanism of Low-Temperature NO Adsorption by Activated Carbon

Adsorption and Reduction of NO2 over Activated Carbon at Low Temperature

Application of activated charcoal radon collectors in high humidity environments

Thermodynamics-Kinetics-Balanced Metal-Organic Framework for In-Depth Radon Removal under Ambient Conditions

Biomass-derived ultramicroporous carbon with narrow pore size distribution for record-high radon adsorption

Cryogenic Adsorption of Nitrogen and Carbon Dioxide in Activated Carbon

Characterization of Pore Structure of Several Activated Carbons with Different Radon Adsorption Capabilities

Radon removal from gaseous xenon with activated charcoal

A High Adsorption Capacity Bamboo Biochar for CO2 Capture for Low Temperature Heat Utilization

Evaluation of radon adsorption efficiency values in xenon with activated carbon fibers

Obtaining Highly Efficient Radon Adsorbents by Adjusting the Pore Structure of Bamboo Charcoal with Particle Size Fractionated Activation

Activated carbon-based CO2 uptake evaluation at different temperatures: The correlation analysis and coupling effects of the preparation conditions