Abstract:The fundamental prompt neutron delayed constant α , the effective delayed neutron fraction βeff , and the effective neutron generation time Λeff are important for accurate measurements of k eff in subcritical systems. In this paper, based on the open-source program OpenMC, a module with the function of calculating the α -eigenvalue is developed based on the k- α iterative method. Based on the nodal expansion method (NEM), an adjoint neutron flux calculation program was developed, which in turn used the idea of coupling the k- α iterative method with the NEM to obtain the neutron kinetics parameters ( α , βeff , and Λeff ) of the subcritical system and allowed for a more accurate k eff under the subcritical system as compared to the traditional k-mode program. In this paper, the results of the α -eigenvalues calculated by the program are validated using the Godiva benchmark and the MUSE-4 device as computational objects. The accuracy of the results for βeff and Λeff was verified with the KUCA (Kyoto University Critical Assembly) benchmark. The results of the k eff calculations using k-mode and α -mode are compared with the ADS benchmark. The results show that the calculation program (α-mode) can obtain k eff under the subcritical system more accurately, which makes up for the shortcomings of the traditional program, which cannot be calculated under the deep subcritical system. The relative error between the calculated and reference values was less than 750 pcm at deep subcriticality (k eff = 0.899). The error was less than 400 pcm at the deeper subcritical system (k eff = 0.952), which can satisfy the demand for neutron dynamics parameters and k eff calculation in the subcritical system. The program can also continue to be upgraded in the later stage in the calculation method and other aspects.

MOC/SN coupled 3D neutron transport software KYCORE

Whole-core forward-adjoint neutron transport solutions with coupled 2-D MOC and 1-D SN and kinetics parameter calculation

Method of Characteristics for 3D, Full-Core Neutron Transport on Unstructured Mesh

MCS based neutronics/thermal-hydraulics/fuel-performance coupling with CTF and FRAPCON

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

An Internal Coupling Method Between Neutronics and Thermal-Hydraulics with RMC and CTF

3D Neutron Transport PWR Full-core Calculation with RMC Code

Preliminary study on CAD-based method of characteristics for neutron transport calculation

Research on RMC neutronics-thermal hydraulics coupling based on universal coupling methodology

Research on Coupling of Neutronics and Thermal-Hydraulics Based on Stochastic Method of Neutron Transport

Study of Neutronics and Thermal-Hydraulics Coupling Methodology Based on Nodal Green's Function Method

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Tiger-3D: 2D/1D Coupled Whole-core Transport Code Based on Large-Scale Parallel Computation

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

Newly Developed Coupling Scheme in RMC with Internal Thermal Feedback and OTF Doppler-Broadening Method

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

ICONE19-43235 Development of a Monte Carlo Multi-group Constants Generation Code

Internal coupling between neutronics and thermal hydraulics with RMC/CTF and validation using vera benchmarks

ICONE23-1418 DEVELOPMENT AND VALIDATION OF THE FAST DOPPLER BROADENING MODULE COUPLED WITHIN RMC CODE

RMC - A Monte Carlo code for reactor physics analysis

Transient multi-physics coupling analysis of the Xi'an Pulsed Reactor under pulsed condition