Abstract:AP1000 is the typical third-generation nuclear power technology. The sensitivity analysis of continuous-energy nuclear data for AP1000 is the basis of uncertainty quantification which plays an important role in subsequent safety analysis for AP1000. Multi-group approximations exist in sensitivity analysis based on multi-group energy nuclear data. Therefore, it’s necessary to calculate sensitivity coefficients based on continuous-energy nuclear data. In this paper, adjoint flux was calculated based on iterated fission probability (IFP) in Monte Carlo forward calculation and then sensitivity coefficients of keff to nuclear data were obtained through first-order perturbation theory. The sparse-matrix method was used to reduce the large memory usage in IFP, while the overlapping block method was used to improve counting efficiency and large statistics fluctuation. The function module of sensitivity analysis was developed in Monte Carlo code NECP-MCX. The module developed above was verified based on the VERA 2B problem. Both energy-dependent and energy-independent sensitivity coefficients calculated by NECP-MCX are all within 3σ of those obtained by MCNP, which indicates the accuracy of the NECP-MCX. In addition, the sensitivity coefficients related to the scattering cross section fluctuate greatly, which is because when the magnitudes of the scattering term and the total term in the sensitivity coefficient formula are the same, the subtraction of these two terms will result in a value with a larger statistical fluctuation. Furthermore, the sensitivity analysis of continuous-energy nuclear data was performed with enhanced NECP-MCX for AP1000 and the nuclear data that are most sensitive to keff were analyzed, which are 235U-ν, 235U-σf, 235U-σt, 238U-σγ, 1H-σelas and 10B-σt, where 235U-ν, 235U-σf and 235U-σt are mainly related to the production of neutron, 238U-σγ and 10B-σt are dominant in the disappearance of neutron and 1H-σelas is dominant in the slowing down of neutron. In this paper, the sensitivity coefficient of keff to nuclear data was derived based on first-order perturbation theory. The module of continuous-energy nuclear data sensitivity analysis was implemented in Monte Carlo code NECP-MCX. The verification of the module was conducted based on VERA 2B problem. Finally, the sensitivity coefficients of keff to continuous-energy nuclear data were calculated for AP1000. The most sensitive nuclear data to keff were obtained from the results. In the future, based on the obtained sensitivity coefficients and the covariance information in the nuclear data, the uncertainty of the AP1000 core keff calculation caused by nuclear data can be obtained through sandwich rule for subsequent safety analysis.

A Universal Adjoint-Weighted Algorithm for Geometric Sensitivity Analysis of K-Eigenvalue Based on Continuous-Energy Monte Carlo Method

Calculating the K-Eigenvalue Sensitivity to Typical Geometric Perturbations with the Adjoint-Weighted Method in the Continuous-Energy Reactor Monte Carlo Code RMC

Preliminary Study of Generalized Sensitivity Analysis with Continuous-Energy Monte Carlo Code RMC

Development of Sensitivity Calculation Capability of Legendre Moments of Scattering Angular Distributions in NECP-MCX

Computing Eigenvalue Sensitivity Coefficients to Nuclear Data by Adjoint Superhistory Method and Adjoint Wielandt Method Implemented in RMC Code

Generalized Sensitivity Analysis of Responses to Nuclear Data in 2-D/1-D Transport Code KYADJ

Geometric Sensitivity Analysis of Generalized Response Function with RMC Code

Improved Generalized Perturbation Theory Method for Sensitivity Analysis of Generalized Response Function

Adjoint-Based Boundary Condition Sensitivity Analysis

Improvement of the Clutch Method for Sensitivity Analysis of K-Eigenvalue to Continuous-Energy Nuclear Data in Necp-Mcx

Eigenvalue Sensitivity and Uncertainty Analysis Based on a 2-D/1-D Whole-Core Transport Code KYADJ

Generalized Sensitivity Analysis with Continuous-Energy Monte Carlo Code RMC

Assessment of continuous and discrete adjoint method for sensitivity analysis in two-phase flow simulations

Nuclear Data Sensitivity and Uncertainty Analysis for Generalized Response with RMC Code

Sensitivity Analysis of Continuous-energy Nuclear Data and Its Application in AP1000

Eigenvalue Implicit Sensitivity and Uncertainty Analysis with the Subgroup Resonance-Calculation Method

Convergence Study of Traditional 2D/1D Coupling Method for K-Eigenvalue Neutron Transport Problems with Fourier Analysis

Perturbation Based Monte Carlo Criticality Search in Density, Enrichment and Concentration

Application of discrete adjoint method to sensitivity and uncertainty analysis in steady-state two-phase flow simulations

Adjoint Monte Carlo Method

Study on Unstructured-Mesh-Based Importance Sampling Method of Monte Carlo Simulation