Abstract:5-hydroxymethylfurfural (HMF) and furfural are promising platform molecules which can be converted to fuel intermediates and hydrocarbon fuels. Herein, one-step, direct conversion of the carbohydrates in never treated biomass to HMF and furfural in a microwave reactor was investigated. The influence of reaction temperature, time, feedstock, addition of Lewis and Brønsted acids, solvent and solvent to aqueous ratio were studied to find the optimum process conditions to maximize the yields of furfurals. The reaction conditions of 200 °C for 5 min with 33 mM HCl and 8 mM AlCl3 using a dioxane/water (4:1) miscible solvent system were found to be the most conducive for direct dehydration of the glucan and hemicelluloses present in untreated poplar wood to furfural and HMF in yields of 91 and 69%, respectively. Furfural could be easily produced in yields greater than 80%, and once formed, it was found to be stable under the various process conditions explored. In contrast, HMF yields varied with both reaction time and temperature, as it readily underwent rehydration to levulinic acid in yields approaching 25–30% at increased reaction severity. The additions of both Brønsted (HCl) and Lewis (AlCl3) acids in catalytic amounts, i.e., 33 and 8 mM, respectively, were required to maximize the yield of furfurals. Reactions were also performed on other feedstocks (corn stover, switchgrass, loblolly pine, and pure cellulose) to investigate the effect of feedstock type on furfurals yields. Results showed that HMF and furfural yields were primarily dependent on hexosan and pentosan loading regardless of the type of feedstock. In addition, biomass physical features, such as crystallinity or the presence of other biomass constituents, such as lignin, had little influence on furfurals yields.

Production of Furfural and Levoglucosan from Typical Agricultural Wastes Via Pyrolysis Coupled with Hydrothermal Conversion: Influence of Temperature and Raw Materials.

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Effects of various pretreatments on fast pyrolysis of biomass to bio-oil: a case study of levoglucosan

Catalytic hydrolysis of corncob for production of furfural and cellulose-rich solids: Product characterization and analysis

Influences of the Reaction Temperature and Catalysts on the Pyrolysis Product Distribution of Lignocellulosic Biomass (Aspen Wood and Rice Husk)

Functional Relationship of Furfural Yields and the Hemicellulose-Derived Sugars in the Hydrolysates from Corncob by Microwave-Assisted Hydrothermal Pretreatment

Insight into impact of co-pyrolysis process parameters on cross-interaction of volatiles between furfural residue and coal via rapid infrared heating

Combining steam distillation with microwave-assisted pyrolysis to maximise direct production of levoglucosenone from agricultural wastes

Direct Conversion of Biomass Carbohydrates to Platform Chemicals: 5-Hydroxymethylfurfural (HMF) and Furfural

Effect Of Glycerol Pretreatment On Levoglucosan Production From Corncobs By Fast Pyrolysis

A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion

Influence of pyrolysis temperature and time on the cellulose fast pyrolysis products: Analytical Py-GC/MS study

Enhancement of the production of chemicals and liquid fuels from grass biowaste via NaOH-Fenton pretreatment coupled with fast pyrolysis

Research on direct conversion of xylose to furfural in high temperature water

Furfural production from the lignocellulosic agro-forestry waste by solvolysis method – A technical review

Comprehensive Utilization for Hydrothermal Conversion Products of Food Waste

Experimental and Kinetic Study on the Production of Furfural and HMF from Glucose

Mechanism Insight into Α-D-galactopyranose Conversion to 5-Hydroxymethyl Furfural by Combining Py-GC–MS Experiments and Theoretical Calculations

Characterisation of the products from pyrolysis of residues after acid hydrolysis of Miscanthus

Coproduction of 1,4:3,6-Dianhydro-α-d-glucopyranose, Furfural, and Formic Acid Through Oxalic Acid-Assisted Staged Fast Pyrolysis of Cellulose

Enzymatic Hydrolysis of Corncob Residues of Furfural Manufacture and Optimum Conditions for Cellulose Conversion