Abstract:Dielectric materials with high electric energy densities and low dielectric losses are of critical importance in a number of applications in modern electronic and electrical power systems. An organic–inorganic 0–3 nanocomposite, in which nanoparticles (0‐dimensional) are embedded in a 3‐dimensionally connected polymer matrix, has the potential to combine the high breakdown strength and low dielectric loss of the polymer with the high dielectric constant of the ceramic fillers, representing a promising approach to realize high energy densities. However, one significant drawback of the composites explored up to now is that the increased dielectric constant of the composites is at the expense of the breakdown strength, limiting the energy density and dielectric reliability. In this study, by expanding the traditional 0–3 nanocomposite approach to a multilayered structure which combines the complementary properties of the constituent layers, one can realize both greater dielectric displacement and a higher breakdown field than that of the polymer matrix. In a typical 3‐layer structure, for example, a central nanocomposite layer of higher breakdown strength is introduced to substantially improve the overall breakdown strength of the multilayer‐structured composite film, and the outer composite layers filled with large amount of high dielectric constant nanofillers can then be polarized up to higher electric fields, hence enhancing the electric displacement. As a result, the topological‐structure modulated nanocomposites, with an optimally tailored nanomorphology and composite structure, yield a discharged energy density of 10 J/cm3 with a dielectric breakdown strength of 450 kV mm–1, much higher than those reported from all earlier studies of nanocomposites.

Progress of Dielectric Polymer Materials with High Energy Density and Low Dielectric Loss

Dielectric Polymer Materials for Electrical Energy Storage and Dielectric Physics: A Guide

Recent Advances on Multilayer Polymer Composites of High Energy Density and Low Dielectric Loss

Research Progress and Prospect of Polymer Dielectrics

Advanced Polymer-Based Insulating Materials with High Energy Storage Density

Research Progress of Ferroelectric Polymer-based Composites with High Energy Density

All-Organic Polymer Dielectric Materials for Advanced Dielectric Capacitors: Theory, Property, Modified Design and Future Prospects

Research progress of low dielectric constant polymer materials

Advance in ceramic-polymer composites with high dielectric constant

Polymer Dielectrics with Simultaneous Ultrahigh Energy Density and Low Loss

High‐Energy‐Density Dielectric Polymer Nanocomposites with Trilayered Architecture

Advanced dielectric polymers for energy storage

Contributing Factors of Dielectric Properties for Polymer Matrix Composites

Progress on Polymer Composites With Low Dielectric Constant and Low Dielectric Loss for High-Frequency Signal Transmission

High-energy-density polymer dielectrics via compositional and structural tailoring for electrical energy storage

Polymer Dielectrics and Their Nanocomposites for Capacitive Energy Storage Applications

An Alternating Multilayer Architecture Boosts Ultrahigh Energy Density and High Discharge Efficiency in Polymer Composites.

Topological‐Structure Modulated Polymer Nanocomposites Exhibiting Highly Enhanced Dielectric Strength and Energy Density

Recent Progress in Polymer Dielectric Energy Storage: From Film Fabrication and Modification to Capacitor Performance and Application

Ductile Polymer-Based Films with Ultrahigh Permittivity and Low Dielectric Loss

Review of polymer materials with low dielectric constant