Effects of fuel decomposition on the minimum ignition energy of n-decane/air

Xinyi Chen,Yuan Wang,Zheng Chen

2019-01-01

Abstract:In scramjet combustion chamber, it is common to cool the engine with the inboard fuel in order to reduce the weight of cooling system and to get additional heat [1]. During the cooling process, the hydrocarbon fuels undergo pyrolysis through endothermic reactions. Consequently, the liquid heavy hydrocarbons decompose into light gaseous species including hydrogen, methane, ethylene, and butane [2]. It was found that the pyrolysis occurs in the preheat zone within a temperature range of 1050-1450 K [3] and the typical time scale for the overall decomposition process is less than 1 ms [2,4]. Though extensive studies have been conducted to characterize the process of the fuel decomposition [2,4,3,5,6], there are only a few studies on how fuel decomposition affects ignition and flame propagation. Smolke et al. [3] assessed the effects of ndodecane decomposition on its mass burning rate and extinction strain rate. They found that the mass burning rate is only slightly increased by fuel decomposition while the density-weighted extinction strain rate is notably more sensitive to fuel decomposition under fuel-lean and stoichiometric conditions. Zhong and Peng [7] found that cracking of endothermic hydrocarbon fuel cannot greatly increase the laminar flame speed and thereby it cannot dramatically improve the combustion characteristic in practical combustor. However, to the authors’ knowledge, the effects of fuel decomposition on the transient forced ignition process have not been studied before. Ignition is one of the most fundamental combustion processes [8]. Understanding of ignition is important not only for fundamental combustion research but also for fire safety control and the optimization of high performance engines. Since the decomposed small fragments have shorter ignition delay and larger mass diffusivity, it is expected that fuel decomposition has a great impact on forced ignition. This motivates the present work, which aims to investigate numerically the effects of fuel decomposition on the minimum ignition energy (MIE).