Abstract:The ternary eutectic chloride salt (NaCl-CaCl2-MgCl2) was designed and prepared for thermal energy storage over 500 degrees C in a concentrated solar power system. The thermal properties of the eutectic salt were measured experimentally using the Differential Scanning Calorimeter (DSC) technique, and the thermal stability including the long-term and short-term thermal stability of the ternary system was investigated by the Thermo-gravimetric Analyzer (TGA) technique and the DSC technique. The results indicated that the melting temperature and fusion enthalpy were 420.83 degrees C and 201.50 J/g, respectively, and the specific heat capacity was 1.49 J/(g.degrees C). In the long-term isothermal stability study, the total weight loss of the eutectic salt was less than 5% below 650 degrees C, and the melting temperature and fusion enthalpy changed slightly as the temperature increased. The ternary eutectic system demonstrated excellent thermal stability below 650 degrees C, which was defined as the upper temperature limit of the ternary system. During the short-term thermal cycling test, the stability and recyclability of the ternary salt were verified in future during the working temperature, generally 50 degrees C lower than the upper temperature limit. The eutectic composition before and after thermal treatment was characterized by the X-ray Diffraction (XRD) technique to analyze the mechanism of thermal instability. The mechanism of thermal instability turned out to be the thermal decomposition of the generated magnesium chloride hexahydrate at high temperature. It was proved that the ternary eutectic chloride salt was a potential candidate for high temperature thermal energy storage applications up to 650 degrees C. (C) 2017 Elsevier Ltd. All rights reserved.

Ternary Eutectic Chloride Salt BaCl 2-KCl-NaCl for High Temperature Thermal Energy Storage

A novel super high latent heat ternary eutectic salt for high temperature thermal energy storage

Thermal Properties and Thermal Stability of the Ternary Eutectic Salt Nacl-Cacl2-Mgcl2 Used in High-Temperature Thermal Energy Storage Process

Eutectic Na2CO3–NaCl Salt: A New Phase Change Material for High Temperature Thermal Storage

Characterisation of Promising Phase Change Materials for High Temperature Thermal Energy Storage

Performance Design of High-Temperature Chloride Salts as Thermal Energy Storage Material

Quaternary Chloride Eutectic Mixture for Thermal Energy Storage at High Temperature

Thermal Stability of the Eutectic Composition in NaCl-CaCl 2 -Mgcl 2 Ternary System Used for Thermal Energy Storage Applications

Thermodynamic calculations and experimental studies of ternary molten salts for high-temperature thermal energy storage

Optimum design and key thermal property of NaCl–KCl–CaCl2 eutectic salt for ultra-high-temperature thermal energy storage

Comprehensive thermal properties of ternary eutectic molten salt/nanoparticles composite phase change materials for high–temperature thermal energy storage

Thermal transport and storage performances of NaCl–KCl–NaF eutectic salt for high temperatures latent heat

Thermal Properties Characterization of Chloride Salts/nanoparticles Composite Phase Change Material for High-Temperature Thermal Energy Storage

Experimental evaluation of binary and ternary eutectic phase change material for sustainable thermal energy storage

A New Ternary Chloride Eutectic Mixture and Its Thermo-physical Properties for Solar Thermal Energy Storage

Thermal performance and economic evaluation of NaCl–CaCl2 eutectic salt for high-temperature thermal energy storage

Microstructure and Thermal Properties of Ternary Chloride Eutectic Salts for High Temperature Thermal Energy Storage

Thermophysical Characterization of MgCl₂·6H₂O, Xylitol and Erythritol as Phase Change Materials (PCM) for Latent Heat Thermal Energy Storage (LHTES)

Thermal properties of KCl–MgCl2 eutectic salt for high-temperature heat transfer and thermal storage system

Development and investigation of form-stable quaternary nitrate salt based composite phase change material with extremely low melting temperature and large temperature range for low-mid thermal energy storage

Determination of Thermo-Physical Properties and Stability Testing of High-Temperature Phase-Change Materials for Csp Applications