Abstract:To improve the hydrophobicity and thermoplastic processability of starch, lactic acid esterified starch (LA-e-starch) was prepared by in-situ solid phase esterification with corn starch as the raw material and LA as the esterifying agent. Fourier transform infrared spectroscopy confirmed that the esterification reaction was successful. The optimal esterification efficiency of LA-e-starch was obtained when the LA proportion was 20% by mass, catalyst ratio at 3%, reaction temperature 80 °C and reaction time 2.5 h. LA-e-starch was characterized by scanning electron microscopy (SEM), contact angle (CA) analysis, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) as well as its water absorption rate evaluated. Results showed that in-situ solid phase esterification mainly occurred on starch granule surfaces and did not destroy the starch granularity. LA-e-starch surfaces were covered with a layer of polylactic acid resin, which caused starch granules to stick together. The initial contact angle of LA-e-starch was clearly larger than that of native starch and the water absorption rate lower than native starch in a 168 h test time, which showed that esterification effectively improved the hydrophobicity of starch. This esterification destroyed the crystalline structure of starch to some extent, resulting in a crystallinity reduction to 25.16%. In addition, the gelatinization temperature and enthalpy were lower than those of native starch. XRD and DSC analyses indicated that esterification modification increased starch thermoplasticity. Also, LA-e-starch exhibited better thermal stability than native starch, from which it was inferred that this application of esterification could improve the thermoplastic processability of starch modify the interfacial compatibility between starch and polymer resins.

Preparation and Characterization of Hydrophobic Groups Grafted Starches by In-Situ Solid Phase Polymerization

In Situ GRAFT COPOLYMERIZATION OF STARCH WITH LACTIC ACID

In Situ Polymerization of Starch with Lactic Acid in Aqueous Solution and the Microstructure Characterization

IN SITU GRAFT COPOLYMERIZATION OF STARCH WITHD,L-LACTIDE IN THE PRESENCE OF POLY(ETHYLENE GLYCOL)

THE SYNTHESIS AND CHARACTERIZATION OF STARCH-DMDAAC-AM GRAFT COPOLYMER

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Swelling Properties and Kinetics of Starch-g-Poly(acrylic Acid) Hydrogels

Research on the preparation and performance of acrylic acid/methyl acrylate-modified starch catalyzed by an HRP binary initiation system

Synthesis and characterization of lactic acid esterified starch by an in-situ solid phase method

The Regulatory b Subunit of Protein Kinase CK2 Mediates Formation of Tetrameric CK2 Complexes*

Frontal Copolymerization Synthesis and Property Characterization of Starch-Graft-Poly(Acrylic Acid) Hydrogels

Characterizations and film-forming properties of different fractionated high-amylose maize starches subjected to hydroxypropylation

Starch-graft-poly(methyl acrylate) copolymer: the new approach to synthesis and copolymer characterization

Thermoplastic Starch Processed under Various Manufacturing Conditions: Thermal and Electrical Properties

Synthesis and characterization of starch-modified polyurethane

A Novel Approach to Grafting Polymerization of Ε-Caprolactone Onto Starch Granules

STUDY ON THE ANIONIC GRAFT POLYMERIZATION OF Ε-Caprolactone ONTO STARCH ACETATE

Inversion-Driven Attenuation Compensation Using Synchrosqueezing Transform

Effect of a Dual Modification by Hydroxypropylation and Acid Hydrolysis on the Structure and Rheological Properties of Potato Starch

Percutaneous radiofrequency ablation of symptomatic giant hepatic cavernous hemangiomas: report of two cases and review of literature.

Urogenital diaphragm: an erroneous concept casting its shadow over the sphincter urethrae and deep perineal space.