Abstract:2D/3D imaging phase transformation during battery operation with synchrotron hard X-ray microscopy Jiajun Wang, Jun Wang* National Synchrotron Light Source II, Brookhaven National Laboratory, Building 743 Ring Road, Upton, NY (USA) Electrochemically driven phase transformation directly influences electrode performance in lithium ion batteries. Advancing our understanding of the mechanism necessitates the development of advanced tools with in situ capability to track the dynamic phase and structural changes of battery materials at 2D and 3D. The synchrotron hard X-ray imaging technique is particularly interesting for applications in battery studies because of its natural characteristics: it is non-destructive, chemically and elementally sensitive, environmentally friendly, and highly penetrative to enable in situ study of a real battery. Considerable progress in this field has been reported recently from our group, beamline X8C at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL), where a new hard X-ray imaging technique, transmission X-ray microscopy (TXM), has been developed and applied to battery microstructure study. TXM is a full-field high resolution x-ray imaging technique with a Fresnel zone plate serving as an objective lens. The newly developed TXM at BNL has offered new opportunities to directly image the interior microstructures of a variety of battery materials in 2D and 3D at nanometer scale.[1-5] A particularly important capability of this new beamline is that it can provide chemical phase mapping information at nano-scale spatial resolution (sub-30 nm for 2D and sub-50 nm for 3D), combining with X-ray absorption near edge structure (XANES) spectroscopy. The absorption mode (5-11 keV) covers most of transition-metal elements (e.g. Zn, Cu, Fe, Co, Ni, Mn, etc), which is particularly interesting for batteries, catalysts and other energy materials studies. The large field of view (40x40 µm) allows observing many particles in the sample at the same time, which will provide more accurate statistic information. In this talk, we will present our recent work using in situ/in operando TXM approach to track phase transformation at 2D and 3D for anode (Tin) and cathode (LiFePO4) battery materials. Challenges and opportunities of TXM technology for energy materials research will be also discussed. This in situ imaging approach has a wide variety of applications in other fields, such as fuel cells, catalysis, environmental science and biological science. Reference [1] Wang, J., Eng, C., Chen-Wiegart, Y. K., Wang, J. Probing three-dimensional sodiation–desodiation equilibrium in sodium-ion batteries by in situ hard X-ray nanotomography. Nat. Commun. 6, 7496 (2015). [2] Wang, J., Chen-Wiegart, Y. K., Wang, J. In operando tracking phase transformation evolution of lithium iron phosphate with hard X-ray microscopy. Nat. Commun. 5, 4570 (2014). [3] Wang, J., Chen-Wiegart, Y. K., Wang, J. In situ three-dimensional synchrotron X-ray nanotomography of the (de)lithiation processes in tin anodes. Angew. Chem. Int. Ed. 126, 4549-4553 (2014). [4] Wang, J. et al. Size-dependent surface phase change of lithium iron phosphate during carbon coating. Nat. Commun. 5, 3145 (2014). [5] Wang, J., Chen-Wiegart, Y. K., Wang, J. In situ chemical mapping of a lithium-ion battery using full-field hard X-ray spectroscopic imaging. Chem. Commun. 49, 6480-6482 (2013). [6] Wang, J. et al. Automated markerless full field hard x-ray microscopic tomography at sub-50 nm 3-dimension spatial resolution. Appl. Phys. Lett. 100, 143107 (2012). Figure 1

An Investigation of Electronic Structure of Novel Electrode Materials for Li-ion Batteries by Soft X-ray Absorption and Emission Spectroscopy II

In Situ Probing Multiple-Scale Structures of Energy Materials for Li-Ion Batteries

Monitoring the Formation of Nickel-Poor and Nickel-Rich Oxide Cathode Materials for Lithium-Ion Batteries with Synchrotron Radiation

Hard X-ray Photoemission Study on Positive Electrode Material Li(Ni1/3Mn1/3Co1/3)O2 for Lithium Ion Battery

Progress of Key Electronic States in Lithium Ion Battery Materials Probed Through Soft X-ray Spectroscopy

2D/3D Imaging Phase Transformation During Battery Operation with Synchrotron Hard X-Ray Microscopy

A Perspective on Studying Electronic Structure of Batteries Through Soft X-ray Spectroscopy

Operando Soft X-Ray Emission Spectroscopy of LiMn2O4 Thin Film Involving Li–ion Extraction/insertion Reaction

Practical Aspects of Atomic-Scale In Situ Investigation of Electrochemistry in All-Solid Lithium-Ion Batteries

Revealing the charge/discharge mechanism of Na–O<sub>2</sub> cells by <i>in situ</i> soft X-ray absorption spectroscopy

Elemental-sensitive Detection of the Chemistry in Batteries Through Soft X-ray Absorption Spectroscopy and Resonant Inelastic X-ray Scattering

Operando analysis of electronic band structure in an all-solid-state thin-film battery

Material/element-dependent fluorescence-yield modes on soft X-ray absorption spectroscopy of cathode materials for Li-ion batteries

Synchrotron‐Based X‐ray Absorption Fine Structures, X‐ray Diffraction, and X‐ray Microscopy Techniques Applied in the Study of Lithium Secondary Batteries

Three dimensional localization of nanoscale battery reactions using soft X-ray tomography

Materials Science Research by Ambient Pressure X-Ray Photoelectron Spectroscopy Systems at Synchrotron Radiation Facilities in Japan: Applications in Energy, Catalysis, and Sensors

Development of Simultaneous Measurement System for X-ray Absorption Spectra at Two Absorption Edges

Soft X-ray Nano-spectroscopy for Electronic Structures of Transition Metal Oxide Nano-structures

Nanosession: Advanced Spectroscopy and Scattering

Synchrotron Near-Field Infrared Nanospectroscopy and Nanoimaging of Lithium Fluoride in Solid Electrolyte Interphases in Li-Ion Battery Anodes

Revealing the charge/discharge mechanism of Na–O2 cells by in situ soft X-ray absorption spectroscopy