A Phase Synthesis Based Time Reversal Focusing Method for Impact and Damage Imaging of Complex Composite Structures

Lei QIU,Shenfang YUAN,Menglong LIU

2012-01-01

Abstract:Abstract. The growing use of composite structures in aerospace structures has attracted much interest to structural health monitoring (SHM) for localization of impact and damage positions due to their poor impact resistance properties. Propagation mechanism and frequency dispersion characteristics of Lamb wave signals on complex composite structures are more complicated than that on simple composite plates. Recently, much attention has been paid to the research of time reversal focusing method because this method shows a promising advantage to give a focusing image of the structural damage, improve the signal-to-noise ratio and compensate the dispersion of Lamb wave signals. In this paper, aiming at developing a practical method for on-line localization of impact and damage on aircraft composite structures which can take advantage of time reversal focusing and does not rely on the transfer function, a new phase synthesis based time reversal focusing method is proposed. In this method, complex Shannon wavelet transform is adopted to extract frequency narrow-band signals of piezoelectric transducers (PZTs) array at a special time-frequency scale and measure phase and group velocity of the signals. Impact and damage images are given out directly through time reversal focusing based on phase synthesis process of the signals. A SHM demonstration system is built on a composite panel of an aircraft wing box with many bolt holes and stiffeners using the phase synthesis based time reversal focusing method. The demonstration results show that this method can estimate the positions of impact and damage efficiently with a low sensitivity of velocity errors and a high anti-jamming capability. According to the demonstration results, when the velocity error is up to 26.7%, the impact and damage localization errors are less than 4.0cm and 3.0cm in the monitoring area of 410mm×450mm and 460mm×800mm, respectively.