Abstract:Abstract The synthesis of ambient-cured sustainable geopolymer mortars (GMs) was studied throughout this work. To reduce carbon dioxide emissions, new materials must be used in the production of sustainable concrete and mortars. Many types of binders are used in the synthesis of GM and concrete (GPC), especially clay minerals. These clay minerals are considered sources of alumina and silica in GM and concrete. The geopolymerization process relies on the alkaline solution activating the alumino-silicate to produce geopolymer gel products. The palygorskite (PA) clay mineral, sodium hydroxide (NaOH), and sodium silicates (Na 2 SiO 3 ) were chosen as a binder (solid material) and alkaline activator solution to synthesize GM at ambient temperature. PA was thermally treated at 550, 650, 700, and 750°C, respectively, to convert into high-reactive PA (HRP) HRP550, HRP650, HRP700, and HRP750, respectively. The characteristics of PA clay, HRP powders, and HRP-based GM were evaluated using compressive strength (CS) testing, X-ray fluorescence analysis, c arbon footprint analysis, X-ray diffraction (XRD) diffractograms, Fourier transform infrared spectroscopy (FTIR) spectroscopy, scanning electron microscopy (SEM) images, and energy-dispersive X-ray spectroscopy (EDS) analysis. The maximum CS of 25.1 MPa was acquired for geopolymer synthesis utilizing HRP700-based GM cured at 30°C for 28 days. FTIR spectroscopy demonstrated that HRP-based GM showed the presence of Si–O, Al–O, and O–C–O bonds stretching vibrations in the alumino-silicate network. The results showed that the CO 2 emissions had a reduction in the HRP-based GM compared with the reference mix of ordinary Portland cement mortar (OPM). The percentage of reductions was 14.1, 13.7, 13.1, and 12.4 for HRP550, HRP650, HRP700, and HRP750, respectively, compared with the OPM mixture. SEM images/EDS analysis and XRD diffractograms confirmed the presence of sodium alumino-silicate hydrates, magnesium silicate hydrate, and calcium silicate hydrate gels with high quantities particularly in the HRP700-based GM than that in HRP550, HRP650, and HRP750, respectively. The results indicate the suitability of HRP calcined at 700°C (HRP700) in the synthesis of the GM.

Characterization of Local Mineral Materials for Geopolymerization Technique

Synthesis And Characterization Of Inorganic Microfiltration Membrane Through Geopolymerization

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

Synthesis and Characterization of Novel Hybrid Wollastonite-Metakaolin-Based Geopolymers

The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer

Optimization and characterization of sustainable geopolymer mortars based on palygorskite clay, water glass, and sodium hydroxide

Exploring the chemistry of metakaolin-based geopolymers

Production, characterization and performance of green geopolymer modified with industrial by-products

Synthesis, characterization and mechanisms of one-part geopolymeric cement by calcining low-quality kaolin with alkali

Thermal Properties of Geopolymer Based on Fayalite Waste from Copper Production and Metakaolin

Synthesis and characterization of novel iron-modified geopolymer cement from laterite clay as low energy material

Synthesis of Geopolymer from a Novel Aluminosilicate-Based Natural Soil Precursor Using Electric Oven Curing for Improved Mechanical Strength

A Multiscale Investigation of Reaction Kinetics, Phase Formation, and Mechanical Properties of Metakaolin Geopolymers

Geopolymerization: a Promising Technique for Membrane Synthesis

High quality geopolymer concrete by using binder nano metakaolin

Micromechanical properties of geopolymers with different calcined clay precursors

Preparation of Al2O3-2SiO2/geopolymer Powder by Hydrolytic Sol-Gel Method and Its Activity Characterization and Research on the Reaction Mechanism

MINERAL POLYMER: CURRENT DEVELOPMENTS AND PROSPECTS

Effect of Sio2/Al2o3 Molar Ratio on Microstructure and Properties of Phosphoric Acid-Based Metakaolin Geopolymerss