Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

Density, microstructure and property of large-scale carbon/carbon composites prepared by fast thermal gradient cvi

Mechanical Properties Investigation of Carbon/carbon Composites Fabricated by a Fast Densification Process

THERMAL PROPERTIES AND MECHANICAL PROPERTIES OF DENSITY GRADIENT CARBON/CARBON COMPOSITES

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites

Improvement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon Composites

Improvement of Film Boiling Chemical Vapor Infiltration Process for Fabrication of Large Size C/C Composite

Microstructure and mechanical properties of C/C–SiC composites fabricated by a rapid processing method

Preparation of C/C Composites by Thermal Gradient Chemical Vapor Infiltration with Vaporized Kerosene As a Precursor

Dual bionics of structure and preparation: Gradient architectured carbon/ceramic composite as light as water but bearing ultra-high temperature max to 2500 °C

Compressive experimental method and properties of C/C composites under ultra-high temperature environment

Research on the thermal conductivity and ablation performance of gradient 3D woven carbon/carbon composite

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

Research on Structures and Properties of C/C Composites Using the Preparation of HCVI

Modeling of Thermal Conductivity of CVI-Densified Composites at Fiber and Bundle Level

PROGRESS OF RESEARCH ON PREPARATION OF CARBON/CARBON COMPOSITE MATERIAL BY THE CHEMICAL LIQUID VAPOR INFILTRATION METHOD

Effect of initial density on thermal conductivity of new micro‐pipeline heat conduction C/SiC composites

Design of domain-limited CVI reactor for L-shaped C/C structure

Multi-scale Modeling of Thermal Expansion Coefficients of C/C Composites at High Temperature

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Preparation and characterization of carbon felt/carbon composites by chemical vapor infiltration process