Abstract:Arsenic (As(III/V)) and selenium (Se(IV/VI)) are toxic inorganic contaminants in groundwater and industrial wastewater. The-pollution caused by As and Se has become an environmental concern throughout the world. A variety of treatment technologies have been applied for As and Se removal from aqueous solutions. Among them, nanoscale zero-valent iron (nZVI) has been found to have a remarkable capability to remove As and Se from waters. Although lots of studies on the process of As and Se removal with nZVI are published, a systematic comparative study is still limited. In this study, the removal capacities of As(III), As(V), Se(IV) and Se(VI) with nZVI in a single-specie system were compared. The performances of nZVI for As(III), As(V), Se(IV) and Se(VI) were investigated on different conditions (including dissolved oxygen, nZVI dosage, contact time, and initial solution pH). The morphology and structure of fresh and spent nZVI were also examined by spherical aberration corrected scanning transmission electron microscopy (Cs-STEM) intergrated with energy-dispersive X-ray spectrometry (XEDS), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The batch experiments were conducted at room temperature in the 50-mL glass vials sealed with screwcaps. According to the speciation diagram, H3AsO30 and H2AsO4- are the respective predominant dissolved As(III) and As(V) species respectively at pH 5.0; while HSeO3- and SeO42- are the predominant dissolved Se(IV) and Se(VI) species respectively at pH 5.0. The results showed that the removal capacities of As and Se investigated generally followed the order of Se(IV)> As(III)> Se(VI)> As(V). Dissolved oxygen (DO) was found no apparent effects on the removal of As(III) and Se(IV), while the removal performance of As(V) and Se(VI) was inhibited at high dissolved oxygen level (> 14 mg/L). The removal of As and Se were enhanced with increasing nZVI dosage. Initial solution pH had no significant effect on Se(IV) removal, whereas the removal of As(III), As(V), and Se(VI) appeared to be strongly dependent on the initial solution pH. The spent nZVI were different due to the different mechanisms of As(III/V) and Se(IV/VI) reactions with nZVI. The results will be useful for the application of nZVI to the treatment of As/Se-containing wastewater.

Nanoscale zero-valent iron supported on mesoporous silica : Characterization and reactivity for Ni ( II ) removal from aqueous solution

Removal of Ni(II) from Aqueous Solutions by Sulfide-Modified Nanoscale Zero-Valent Iron Supported by Hydroxyapatite(hap/s-Nzvi)

Sequestration of Cd(II) with Nanoscale Zero-Valent Iron (nzvi): Characterization and Test in a Two-Stage System

Application of zero-valent iron nanoparticles for the removal of aqueous zinc ions under various experimental conditions.

Enhanced Trapping of Ni(Ii) Ions by Diatomite-Supported Nanoscale Zerovalent Iron from Aqueous Solution

Removal of Sb(III) and Sb(V) from Aqueous Solutions Using nZVI

Nanoscale Zero-Valent Iron Dispersed by Sodium Alginate Enables Highly Efficient Removal of Lead (Pb) from Aqueous Solution

Well-Dispersed Nanoscale Zero-Valent Iron Supported in Macroporous Silica Foams: Synthesis, Characterization, and Performance in Cr(VI) Removal

Removal of Hexavalent Chromium From Wastewater by Cu/Fe Bimetallic Nanoparticles

Stabilization of Nanoscale Zero-Valent Iron in Water with Mesoporous Carbon (Nzvi@mc)

The superior performance of silica gel supported nano zero-valent iron for simultaneous removal of Cr (VI)

Nanocelluloses Affixed Nanoscale Zero-Valent Iron (nzvi) for Nickel Removal: Synthesis, Characterization and Mechanisms

Zero-Valent Iron Nanoparticles (Nzvi) Supported By Kaolinite For Cu-Ii And Ni-Ii Ion Removal By Adsorption: Kinetics, Thermodynamics, And Mechanism

Efficient and selective removal of SeVI and AsV mixed contaminants from aqueous media by montmorillonite-nanoscale zero valent iron nanocomposite

Facile Modification of Nanoscale Zero-Valent Iron with High Stability for Cr(VI) Remediation.

Removal of Arsenic and Selenium with Nanoscale Zero-Valent Iron (Nzvi)

Heavy Metal Removal Using Nanoscale Zero-Valent Iron (nzvi): Theory and Application.

Cr (VI) Removal from Aqueous Solution Using Starch and Sodium Carboxymethyl Cellulose-Coated Fe and Fe /ni Nanoparticles

Multi-component removal of Pb(II), Cd(II), and As(V) over core-shell structured nanoscale zero-valent iron@mesoporous hydrated silica

Fast and High Adsorption of Ni(II) on Vermiculite-Based Nanoscale Hydrated Zirconium Oxides

Sulfide mediated zero valent iron for enhanced nickel removal under neutral condition: Reaction kinetic, mechanism, and stability