Abstract:When core melt occurs in severe accident in Sodium Cooled Fast Reactor (SFR), molten core material moves to the lower plenum in reactor vessel and fragmented by fuel coolant interaction. These fragmented particles, so called debris, accumulate on the structure surface to form debris bed. If the thickness of the debris bed exceeds the coolable thickness of the decay heat, boiling of sodium occurs inside the debris bed. It is found from past in-pile experiments that the sodium flow and boiling inside the debris bed caused by a decay heat planarize the debris bed to lower the debris bed thickness. This mechanism is called self-leveling of debris bed. In the accident sequence of SFR, when fuel debris locally accumulates beyond the coolable thickness, fuel debris remelts with decay heat and they cannot be retained in-vessel. However, it is expected that the debris bed thickness lowers the coolable thickness with self-leveling phenomenon and they can be safely retained in-vessel. This is why an appropriate assessment for self-leveling behavior is important for safety analysis of SFR with the object of safety cooling of fuel debris. Therefore, the object of this study is to develop new analytical methods to simulate unique phenomena in self-leveling behavior and implement it to SFR safety analysis code. The characteristic of self-leveling is that when the larger external forces caused by environmental fluids are larger than a threshold value, the debris bed is fluidized. The new methods are developed with assuming that the debris bed behaves as Bingham fluid from this feature. They are categorized into two main parts. The first part is particle interaction models to model the effect of particle-particle contacts and collisions. Particle pressure and particle viscosity related to particle-particle collisions and contacts, respectively, are applied to pressure and viscosity term in the particle momentum equation. The second part is a large deformation method, which simulates Bingham fluid characteristic of debris bed. This method numerically judges a onset of debris bed fluidization which depends on a shear stress strength. An experimental study of self-leveling behavior, in which the particle bed behavior driven by bubbles inflow from the bottom of bed in gas-solid-liquid three-phase flow was observed, is analyzed to validate the new methods. Simulation results well reproduced the transient changes of particle bed, whose elevation angle and form deformation becomes gradually small and obscure, respectively. Their dependencies on particle size and density are also well simulated with new methods. The assessment results show that these methods provide a basis to develop analytical methods of self-leveling behavior of debris bed in the safety assessment of SFRs.

An experimental study on flow characteristics of homogeneous and stratified debris beds

Flow Resistances Characteristics in a Particulate Bed with the Configurations of Uniform Mixture and Stratification

Pressure Drops and Dryout Heat Fluxes of Packed Beds with Cylindrical Particles

An Experimental Study on Pressure Drop and Dryout Heat Flux of Two-Phase Flow in Packed Beds of Multi-Sized and Irregular Particles

Investigations on Two-Phase Flow Resistances and Its Model Modifications in a Packed Bed

Pressure Losses and Interfacial Drag for Two-Phase Flow in Porous Beds with Coarse Particles

An Experimental Study on Coolability of a Particulate Bed with Radial Stratification or Triangular Shape

An Experimental Study on Two-Phase Flow Resistances and Interfacial Drag in Packed Porous Beds

ICONE19-43447 EXPERIMENTAL INVESTIGATIONS ON FRICTION LAWS AND DRYOUT HEAT FLUX OF PARTICULATE BEDS PACKED WITH MULTI-SIZE SPHERES AND IRREGULAR PARTICLES

EXPERIMENTAL INVESTIGATION ON DRYOUT PHENOMENON OF HOMOGENEOUS AND AXIAL STRATIFIED DEBRIS BED

Experimental Characterization of the Effective Particle Diameter of A Particulate Bed Packed with Multi-Diameter Spheres

Numerical investigation of cooling ability in heat-generating porous debris bed after severe accident in PWR

Numerical Simulation of Single/Two-Phase Flow in a Stratified Porous Bed

Experimental Study of Two-Phase Flow Regime and Pressure Drop in A Particulate Bed Packed with Multidiameter Particles

Study on Dryout Heat Flux of Axial Stratified Debris Bed under Top-Flooding

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

Experimental and Numerical Research on the Debris Bed Formation in Severe Accidents of Nuclear Reactors

Development of Assessment Method for a Self-Leveling Behavior of Debris Bed and Analyses of Experiments

Investigations on the Debris Bed Formation Behavior of the Heated Solid Particles

Study on Melt Stratification and Migration in Debris Bed Using the Moving Particle Semi-Implicit Method

Pressure Drops and Model Modification for Two-Phase Flow in Porous Beds with Coarse Particles