Abstract:The risk of large-amplitude vibrations of bridge hangers due to galloping instabilities has posed a challenge to the engineering and research communities. Galloping vibrations can lead to serviceability problems and reduce fatigue life. A number of aeroelastic models have been developed to predict the unstable behavior and to design counteracting measures, i.e., shape modifications and structural damping addition. All the proposed procedures generally consider that the parameters are assigned according to deterministic values. A framework is proposed for the deterministic and probabilistic assessment of the minimum structural damping required to prevent galloping of bridge hangers based on the output of a two-degree-of-freedom sectional quasi-steady aeroelastic model. All the variables required to define the hanger dynamics, the sheath aerodynamics, and the local wind climate are considered. Because of the large uncertainties and of the nonlinear nature of the problem, the distribution of the minimum structural damping required to prevent galloping is obtained by Monte Carlo simulations. An application of the method to the proposed Messina Straits crossing bridge is presented. Starting from wind tunnel measurements of the aerodynamic coefficients of a real plain high-density polyethylene (HDPE) cable sheath, the random nature of the aerodynamics is shown, which is ascribed to the cable irregularities (surface roughness, section distortion, and axis curvature). Then the statistical variation of the parameters of the model is considered, based on real data derived from wind tunnel tests and from the wind climate measured at the site. The distributions of the parameters defining the hanger dynamics are assigned according to typical values. Using a normal and a log-normal model of capacity, the probability of failure is calculated. The results are discussed and compared with conventional approaches based on the definition of the deterministic variables. Finally, using a deterministic model of capacity, a simplified closed-form equation for the evaluation of the structural damping needed to prevent galloping in a probabilistic-based performance approach is proposed.

Wind Tunnel Test and Aerodynamic Damping Study for Galloping of Iced 6-bundled Conductors

Stability evaluation and aerodynamic damping study on three-degree-of-freedom coupled galloping of iced conductors

Wind tunnel test and critical wind speed study for galloping of 6-bundled iced conductors

Aerodynamic Damping Identification for Iced Transmission Line Galloping

A wind tunnel study on galloping of an aeroelastic iced conductor model

Aero-Elastic Wind Tunnel Test of A High Lighting Pole

A simultaneous measurement method for multi-directional galloping of iced bundled conductors and its application in spatial galloping behavior

Aerodynamic Force Characteristics and Galloping Analysis of Iced Bundled Conductors

Aerodynamic Characteristics of D Shape Iced Bundled Conductors with Different Initial Attack Angles

Galloping Stability Criterion for 3-DOF Coupled Motion of an Ice-Accreted Conductor

Study on Galloping Oscillation of Iced Twin Bundle Conductors Considering the Effects of Variation of Aerodynamic and Electromagnetic Forces

Galloping Response of Sector-Shape Iced Eight Bundle Conductors

Probabilistic Versus Deterministic Assessment of the Minimum Structural Damping Required to Prevent Galloping of Dry Bridge Hangers

Analysis of Transverse-Torsional Coupling Galloping Trajectory of Iced Transmission Lines

An aerodynamic anti-galloping technique of iced 8-bundled conductors in ultra-high-voltage transmission lines

Effects of Ice Surface and Ice Shape on Aerodynamic Characteristics of Crescent-Shaped Iced Conductors

Galloping Mechanism of a Closely Tuned 3-DOF System Considering Aerodynamic Stiffness

Investigation on Galloping of D-Shape Iced 6-Bundle Conductors in Transmission Tower Line

Numerical Simulation of Galloping Characteristics of Multi-Span Iced Eight-Bundle Conductors

Torsional Stiffness and Galloping Mechanism Analysis on Bundle Conductors for Overhead Transmission Lines

Study on the Effect of Anti-galloping Device with Cubic Stiffness and Particle Damping