Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

mi-transparent perovskite fi lms with centimeter-scale superior uniformity by the hybrid deposition method †

Fabrication of Semi-Transparent Perovskite Films with Centimeter-Scale Superior Uniformity by the Hybrid Deposition Method

Organometal halide perovskite thin films and solar cells by vapor deposition

Ultra-thin high efficiency semitransparent perovskite solar cells

Near-neutral-colored Semitransparent Perovskite Films Using a Combination of Colloidal Self-Assembly and Plasma Etching

(Invited) Uniform Nanostructures for Highly Efficient and Reproducible Perovskite Solar Cells

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

te thin fi lms and e ffi cient perovskite solar cells prepared by the hybrid deposition method †

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

An Up-Scalable Approach to CH3NH3PbI3 Compact Films for High-Performance Perovskite Solar Cells

Solvent-assisted Growth of Organic–inorganic Hybrid Perovskites with Enhanced Photovoltaic Performances

Preparing High-Efficiency Perovskite Solar Cells

Engineering of Electron-Selective Contact for Perovskite Solar Cells with Efficiency Exceeding 15%.

Ionic Liquid Stabilized Perovskite Solar Modules with Power Conversion Efficiency Exceeding 20%

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

Facile preparation of organometallic perovskite films and high-efficiency solar cells using solid-state chemistry

Facile and Scalable Fabrication of Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells in Air Using Gas Pump Method

Semitransparent Perovskite Solar Cells with an Evaporated Ultra‐Thin Perovskite Absorber

Semitransparent perovskite solar cells with an evaporated ultra-thin perovskite absorber

A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells

High Efficient Planar-heterojunction Perovskite Solar Cell Based on Two-step Deposition Process