Abstract:This paper primarily investigates the effect of the tilt of corner cube reflector (CCR) arrays on lunar laser ranging (LLR). A mathematical model was established to study the random errors caused by the tilt of the CCR arrays. The study found that, ideally, when the laser ranging pulse width is 10 picoseconds or less, it is possible to distinguish from which specific corner cubes within the CCR array each peak in the echo signal originates. Consequently, partial data from the echo can be extracted for signal processing, significantly reducing random errors and improving the single-shot precision of LLR. The distance obtained by extracting part of the echo can be reduced to the center position of the array, thereby providing multiple higher-precision ranging results from each measurement. This not only improves the precision of LLR but also increases the data volume. A simulation experiment based on the 1.2 m laser ranging system at Yunnan Observatories was conducted. By extracting one peak for signal processing, the single-shot precision improved from 32.24 mm to 2.52 mm, validating the theoretical analysis results. Finally, an experimental laser ranging system based on a 53 cm binocular telescope system was established for ground experiments. The experimental results indicated that the echo signal could identify the tilt state of the CCR array. By extracting the peak returned by the central CCR for signal processing, the ranging precision was greatly improved. Through theoretical analyses, simulation experiments, and ground experiments, a solution to reduce the random errors caused by the tilt of the CCR array was provided. This offers an approach to enhance the single-shot precision of future LLR and provides a reference for upgrading ground-based equipment at future laser ranging stations.

A 170 mm hollow corner cube retroreflector on Chang ’ e 4 lunar relay satellite

Research on Far-Field Diffraction of Cube-Corner Retroreflector in the Satellite Laser Ranging System

Development of a 170-mm hollow corner cube retroreflector for the future lunar laser ranging

Manufacture of a hollow corner cube retroreflector for next generation of lunar laser ranging

Schematic Design of New Generation of Lunar Corner Cube Retroreflector with Single Aperture

Ground-based Corner Cube Retroreflector Optimal Design for the Geolocation Validation of Satellite Photon Counting Lidar.

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Calculation On Diffraction Aperture Of Cube Corner Retroreflector

Effect of structural recession on the performance of a satellite laser retroreflector

Lunar laser ranging: The pointing error analysis to Lunokhod 1 and Lunokhod 2

Optical Design of the Retro-Reflector in Space for Laser Ranging

Design and optimization of dihedral angle offsets for the next generation lunar retro-reflectors

A Satellite Photon-Counting Laser Altimeter Calibration Algorithm Using CCRs and Indirect Adjustment

Calibration method of the right-angle error of a hollow corner-cube retroreflector based on an independent autocollimator

Analysis of the Effect of Tilted Corner Cube Reflector Arrays on Lunar Laser Ranging

Calibration and Validation of a Multi-Beam LiDAR Onboard China Chang’e Lunar Probe for Landing Obstacle Avoidance

Design of Chang'e-4 Lunar Farside Soft-Landing Mission

Design of Satellite Laser Retro-Reflector

Design and performances of laser retro-reflector arrays for Beidou navigation satellites and SLR observations

On-orbit geometric calibration of satellite laser altimeters using infrared detectors and corner-cube retroreflectors