Abstract:On-line particle sizing through acoustic emission (AE) sensing is promising in many industrial applications. However, very limited research on the fundamental sensing mechanism of this technique is available. One imminent issue is the propagation of impact-induced AE signals along a waveguide, which plays a significant role in interpreting the resulting acoustic waveforms and optimizing the design of the waveguide. In this paper, a broadband point-contact sensor, which has an extremely flat frequency response, is used to acquire faithful AE signals. Experimental investigations into the wave propagation behaviour are presented and the influences of different parameters, including particle size, impact velocity, material type and impact location, on the detected AE signals are also discussed. Two fundamental waves with different characteristics are observed in the acoustic waveforms. Experimental results obtained demonstrate that both the particle size and material type greatly affect the amplitude rather than the signal pattern of the acoustic waveform. Meanwhile, significant changes in the signal amplitude and pattern occur with different impact velocities and impact locations. (c) 2021 Elsevier B.V. All rights reserved. On-line particle sizing through acoustic emission (AE) sensing is promising in many industrial applications. However, very limited research on the fundamental sensing mechanism of this technique is available. One imminent issue is the propagation of impact-induced AE signals along a waveguide, which plays a significant role in interpreting the resulting acoustic waveforms and optimizing the design of the waveguide. In this paper, a broadband point-contact sensor, which has an extremely flat frequency response, is used to acquire faithful AE signals. Experimental investigations into the wave propagation behaviour are presented and the influences of different parameters, including particle size, impact velocity, material type and impact location, on the detected AE signals are also discussed. Two fundamental waves with different characteristics are observed in the acoustic waveforms. Experimental results obtained demonstrate that both the particle size and material type greatly affect the amplitude rather than the signal pattern of the acoustic waveform. Meanwhile, significant changes in the signal amplitude and pattern occur with different impact velocities and impact locations.

Localization of hypervelocity impact to spacecraft using shock acoustic emission waves : experiment and simulation study

Hypervelocity Impact Detection and Location for Stiffened Structures Using a Probabilistic Hyperbola Method

Insight into wave propagation in polyimide films and resistive grid sandwich structures towards a hybrid monitoring of hypervelocity impact

Three-dimensional Characterization of Debris Clouds under Hypervelocity Impact with Pulsed Digital Inline Holography.

Impact Localization in Complex Cylindrical Shell Structures Based on the Time-Reversal Virtual Focusing Triangulation Method

A Method for Estimating Impact Location of Loose Part Using HHT

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Experimental and Numerical Investigation of Acoustic Emission Source Localization Using an Enhanced Guided Wave Phased Array Method

A Gradient Vector Descent Strategy for Localizing Acoustic Emission Sources in Discontinuous Structures with a Hole

Method of Determining the Critical Impact Velocity of Energetic Devices

Experimental Investigations into the Propagation of Acoustic Emission Signals from Particle Impacts along a Waveguide

Smoothed particle hydrodynamics with kernel gradient correction for modeling high velocity impact in two- and three-dimensional spaces

Predicting the Damage on a Target Plate Produced by Hypervelocity Impact Using a Decoupled Finite Particle Method

A New Formula for Predicting the Crater Size of a Target Plate Produced by Hypervelocity Impact

Research on Impact Location Method of Complex Spacecraft Pressure Vessel Structure

Numerical investigation on jet penetration capacity of hypervelocity shaped charge in underwater explosion

A viscoelastic-viscoplastic thermo-mechanical model for polymers under hypervelocity impact

Numerical investigation of hypervelocity impact simulation with FEM/SPH formulation for space structures

Numerical analysis of hypervelocity impact problems with large deformations, high strain rates and spall fractures

Guided Lamb Wave Array Time-Delay-Based MUSIC Algorithm for Impact Imaging

Fluid-Solid Coupled Simulation of Hypervelocity Impact and Plasma Formation