Abstract:Lithium metal is considered as a potential anode for lithium batteries, but its commercialization process is hindered by several problems, including uncontrollable lithium dendrite growth, large volume expansion, low utilization of lithium and so on. To address these issues, in this work, lithiophilic silver layers with 80 nm thickness are coated on the commercial carbon cloth (CC) using thermal evaporation method to regulate Li growth during lithium plating process. We find that the uniformly distributed silver layers can successfully reduce lithium nucleation over-potential, thus inducing the homogeneous deposition of metal Li, supported by density functional theory calculation. Benefited from the as prepared lithiophilic Ag layers, the CC/Ag/Li anode with an ultrahigh areal capacity of 16 mAh cm(-2) is achieved adopting electrochemical deposition at 0.2 mA cm(-2) without the formation of lithium dendrites, which is confirmed by continuous detection using visual discrimination and scanning electron microscope observation. As a result, a stable dendrite-free CC/Ag/Li anode exhibits excellent electrochemical properties: (1) the assembled CC/Ag/Li symmetrical cell maintains a stable voltage hysteresis within 25 mV after cycling 750 hat a current density of 1 mA cm(-2); (2) The assembled CC/Ag/Li-LiFePO4 cell also demonstrates enhanced electrochemical behaviors in terms of rate performance and capacity retention; (3) When coupled with a carbon/sulfur cathode, the CC/Ag/Li anode also demonstrates excellent compatibility. The initial discharge capacity of the CC/Ag/Li-S cell is 899.3 mAh g(-1) at 0.2C, the reversible capacity retains a value of 587.7 mAh g(-1) after 400 cycles, corresponding to a capacity attenuation rate of 0.075% per cycle.

Electrodeposition of a Continuous, Dendrite-Free Aluminum Film from an Ionic Liquid and Its Electrochemical Properties

Electrodeposition of Al foil for the collector of lithium-ion batteries by electrorefining in [Emim]Cl-AlCl 3 ionic liquid with O 2− ion at room temperature: Electrochemical dissolution behavior of Al anode

Electrodeposition and Corrosion Behavior of Nanocrystalline Aluminum from A Chloroaluminate Ionic Liquid

Li metal coated with Li3PO4 film via atomic layer deposition as battery anode

Anodic behavior of Fe in acidic AlCl3-EMIC ionic liquid

Viscous Layer Formed in the Anodic Electrolytic Etching of Reactive Metals in Ionic Liquid

Oxide Film Efficiently Suppresses Dendrite Growth in Aluminum-Ion Battery

Anodic behavior in AlCl3-EMIC ionic liquid of Ti6Al4V alloy and its application for enhancing the adhesion strength of aluminum coatings

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Reversible, Dendrite-Free, High-Capacity Aluminum Metal Anode Enabled by Aluminophilic Interface Layer

Aluminum intercalation behaviours of {[Fe(Tp)(CN) 3 ] 2 [M(H 2 O) 2 } cyanido-bridged chain compounds in ionic liquid electrolyte

Achieving homogeneous Li deposition of 3D dendrite-free lithium metal anode through atomic layer deposition surface modification

Ultrathin Al foils to fabricate dendrite-free Li–Al anodes

Physicochemical Characterization of AlCl3–1-Ethyl-3-methylimidazolium Chloride Ionic Liquid Electrolytes for Aluminum Rechargeable Batteries

Electrokinetic Phenomena Enhanced Lithium‐Ion Transport in Leaky Film for Stable Lithium Metal Anodes

Bioderived freestanding film as a robust interfacial protective layer for advanced lithium metal anodes

Low-cost AlCl3/Et3NHCl Electrolyte for High-Performance Aluminum-Ion Battery

Fabrication of Sn-Ni Alloy Film Anode for Li-ion Batteries by Electrochemical Deposition

Electrochemical Investigation of Li–Al Anodes in Oligo(ethylene Glycol) Dimethyl Ether/lipf 6

Anode-Free Aluminum Electrode with Ultralong Cycle Life and High Coulombic Efficiency Exceeding 99.92% Enabled by a Lattice-Matching Layer

Non-aqueous Electrodeposition of Porous Tin-Based Film As an Anode for Lithium-Ion Battery