Abstract:The removal of decabromodiphenyl ether (BDE 209), as a typical persistent organic pollutant (POP), is of worldwide concern. Mechanochemical (MC) processes are promising methods to degrade environmental pollutants, most of which use a single grinding reagent. The performance of MC processes with co-milling agents still needs to be further verified. In this study, an efficient MC treatment with combined utilization of lithium cobalt oxide (LiCoO2) and iron (Fe) as co-milling reagents for BDE 209 degradation was investigated. The synchronous action of LiCoO2 and Fe with a LiCoO2/Fe/Br molar ratio of 1.5:1.67:1 and a ball-to-powder ratio of 100:1 led to almost thorough-paced abatement and debromination of BDE 209 within 180 min using a ball milling rotation speed of 600 rpm. The reduction in particle sizes and the destruction of crystal structure in mixture powders with the increase in milling time induced the enhanced degradation of BDE 209, as characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The X-ray photoelectron spectroscopy (XPS) characterization showed that the valence state of Co was converted from Co(III) to Co(II), and Fe(0) was changed to Fe(III) when treated with an MC process. This indicated that the reductive debromination of BDE 209 by Fe and the following oxidative degradation of debrominated products by LiCoO2 were integrated in a concerted way. It proved the removal of BDE 209 via an MC treatment. The full breakage of C-Br and C-O bonds in BDE 209 was confirmed by Fourier transform-infrared spectrometry (FT-IR) spectra, and a possible abatement pathway was also proposed based on the identified intermediate products using gas chromatography–mass spectrometry (GC-MS). These obtained results indicated that a combination of LiCoO2 and Fe as co-milling reagents is promising in the MC treatment of toxic halogenated pollutants like BDE 209.

The Royal Society of C bromocyclododecane ( HBCD ) by grinding assisted with sodium persulfate

Disposal of hexabromocyclododecane (HBCD) by grinding assisted with sodium persulfate

Mechanochemical Dehalogenation of Brominated Flame Retardants and Preliminary Application for Recycling BFR-containing Plastic Waste

Mechanochemical Destruction and Mineralization of Solid-Phase Hexabromocyclododecane Assisted by Microscale Zero-Valent Aluminum.

Mechanochemical Degradation of Hexabromocyclododecane and Approaches for the Remediation of Its Contaminated Soil

Green Mechanochemical Oxidative Decomposition of Powdery Decabromodiphenyl Ether with Persulfate.

Enhanced Degradation of Decabromodiphenyl Ether Via Synergetic Assisted Mechanochemical Process with Lithium Cobalt Oxide and Iron

Characterization of Environmentally Friendly Degradation of Hexabromocyclododecane by a Bacillus Strain HBCD-sjtu

Microbial debromination of hexabromocyclododecanes

A novel ball-milled aluminum-carbon composite for enhanced adsorption and degradation of hexabromocyclododecane

Sodium persulfate-assisted mechanochemical degradation of tetrabromobisphenol A: Efficacy, products and pathway

Mechanochemical degradation of tetrabromobisphenol A: performance, products and pathway.

Pollution and biodegradation of hexabromocyclododecanes: A review

Mechanochemical destruction of a chlorinated polyfluorinated ether sulfonate (F-53B, a PFOS alternative) assisted by sodium persulfate

Aerobic degradation and the effect of hexabromocyclododecane by soil microbial communities in Taiwan

Co-metabolic degradation and metabolite detection of hexabromocyclododecane by Shewanella oneidensis MR-1

Efficient hexabromocyclododecane-biodegrading microorganisms isolated in Taiwan

Efficient Destruction of Hexachlorobenzene by Calcium Carbide Through Mechanochemical Reaction in a Planetary Ball Mill.

Photodegradation of Hexabromocyclododecane (HBCD) by Fe(III) Complexes/h2o2 under Simulated Sunlight

Diastereomer-specific Transformation of Hexabromocyclododecane by Soil Bacterial Communities

In-situ Debromination Mechanism Based on Self-Activation and Catalysis of Ca(OH)2 During Pyrolysis of Waste Printed Circuit Boards