Abstract:A novel micro-electro-mechanical systems (MEMS) inertial microswitch with a flexible contact-enhanced structure to extend the contact duration has been proposed in the present work. In order to investigate the stiffness k of the stationary electrodes, the stationary electrodes with different shapes, thickness h, width b, and length l were designed, analyzed, and simulated using ANSYS software. Both the analytical and the simulated results indicate that the stiffness k increases with thickness h and width b, while decreasing with an increase of length l, and it is related to the shape. The inertial micro-switches with different kinds of stationary electrodes were simulated using ANSYS software and fabricated using surface micromachining technology. The dynamic simulation indicates that the contact time will decrease with the increase of thickness h and width b, but increase with the length l, and it is related to the shape. As a result, the contact time decreases with the stiffness k of the stationary electrode. Furthermore, the simulated results reveal that the stiffness k changes more rapidly with h and l compared to b. However, overlarge dimension of the whole microswitch is contradicted with small footprint area expectation in the structure design. Therefore, it is unreasonable to extend the contact duration by increasing the length l excessively. Thus, the best and most convenient way to prolong the contact time is to reduce the thickness h of the stationary electrode while keeping the plane geometric structure of the inertial micro-switch unchanged. Finally, the fabricated micro-switches with different shapes of stationary electrodes have been evaluated by a standard dropping hammer system. The test maximum contact time under 288 g acceleration can reach 125 µs. It is shown that the test results are in accordance with the simulated results. The conclusions obtained in this work can provide guidance for the future design and fabrication of inertial microswitches.

Design and Characterisation of an Inertial Microswitch with Electrophoretic Polymer-Metal Composite Fixed Electrode for Extending Contact Time

Fabrication and Characterization of a Multidirectional-Sensitive Contact-Enhanced Inertial Microswitch with a Electrophoretic Flexible Composite Fixed Electrode

A Multidirectional-Sensitive Inertial Microswitch with Electrophoretic Polymer-Metal Composite Fixed Electrode for Flexible Contact

Design and Dynamics Simulation of a Micromachined Inertial Switch with Polymer-Metal Composite Fixed Electrode for Flexible Contact

Design and Characterization of an Inertial Microswitch with Synchronous Follow-Up Flexible Compliant Electrodes Capable of Extending Contact Duration

An inertial micro-switch with compliant cantilever fixed electrode for prolonging contact time

A Surface-Micromachining-based Inertial Micro-Switch with Compliant Cantilever Beam As Movable Electrode for Enduring High Shock and Prolonging Contact Time

Tri-Axial All-Metal Inertial Microswitch with Compliant Stationary Electrodes to Prolong Contact Time

Analysis and elimination of the ‘skip contact’ phenomenon in an inertial micro-switch for prolonging its contact time

A laterally-driven micromachined inertial switch with a compliant cantilever beam as the stationary electrode for prolonging contact time

Design, Simulation and Characterization of an Inertia Micro-Switch Fabricated by Non-Silicon Surface Micromachining

Fabrication of a Novel Contact-Enhanced Horizontal Sensitive Inertial Micro-Switch with Electroplating Nickel

Design and Optimization of a Stationary Electrode in a Vertically-Driven MEMS Inertial Switch for Extending Contact Duration.

Influence of Applied Acceleration Loads on Contact Time and Threshold in an Inertial Microswitch with Flexible Contact-Enhanced Structure

Simulation, Fabrication and Characterization of an All-Metal Contact-Enhanced Triaxial Inertial Microswitch with Low Axial Disturbance

A Contact-Enhanced MEMS Inertial Switch with Electrostatic Force Assistance and Multi-Step Pulling Action for Prolonging Contact Time

Design and Contact Dynamics Simulation of an Inertia Micro-Switch Based on Non-Silicon Substrate

Design, Simulation and Fabrication of a Novel Contact-Enhanced MEMS Inertial Switch with a Movable Contact Point

Development of a Novel MEMS Inertial Switch with a Compliant Stationary Electrode

A MEMS Inertia Switch With Bridge-Type Elastic Fixed Electrode for Long Duration Contact

Design, simulation and characterization of a MEMS inertia switch with flexible CNTs/Cu composite array layer between electrodes for prolonging contact time