Abstract:The small scale Organic Rankine Cycle (ORC) using a turbine as expanders is considered as one of the most efficient ways to convert the waste heat energies of automobile engine into electrical energy, in the power range from several kW up to dozens of kW. In general, two important factors must be taken into account when designing the ORC turbine: the real gas effects of the organic fluid and the high expansion ratio presented in the machinery due to thermodynamic and efficiency factors. The characteristic parameters of R245fa have great difference compared with air. When designing an ORC turbine, the initial problem is the influence of the working fluid characteristic parameters on the turbine performance. Similarity analysis method is used to analyze this problem. When using the similarity theory to design two similar operating conditions, gas constant R and dynamic viscosity μ are easy to be taken into account as they have a dimension; specific heat ratio κ is hard to be taken into consideration. In this paper, a high expansion ratio ORC turbine is generated for a small scale ORC system working with the organic fluid R245fa, and the influence of κ on the turbine performance parameters analyzed. Firstly, the turbine geometry is designed in an iterative process using the commercial design tool Concepts-NREC Rital program, and the designed operating condition is determined. Secondly, the similarity criterion numbers are deduced with no consideration of the specific heat ratio κ, and the similar operating condition is calculated by the deduced similarity criterion numbers. The results achieved by the one-dimensional design software Rital shows that the deviation of similarity criterion numbers is small, which indicates that the two operating conditions are similar. Then, to verify the conclusion above, the flow field simulation using one channel model is conducted based on the R245fa operating condition and air operating condition using the computational fluid dynamics (CFD) code NUMECA-FineTurbo. However, deviations of the similarity criterion numbers from the CFD results are more than twice to those from the one-dimensional results. The larger deviation may indicate that the influence of the specific heat ratio κ cannot be ignored. After that, the distributions of the total pressure, total temperature, the relative Ma number and entropy in the nozzle and rotor channel are compared. These results show that except the total temperature the distributions of the other three parameters are very similar. The similar distribution may indicate that the specific heat ratio κ has little influence on the efficiency and expansion ratio, but κ has greater influence on the temperature and output power. All of these conclusions are made according to the simulation results, the accuracy should be verified through the test results.

Thermodynamic Analysis Of Organic Rankine Cycle (Orc) Systems Based On Turbine Performance Prediction

Comparison study of Trilateral Rankine Cycle, Organic Flash Cycle and basic Organic Rankine Cycle for low grade heat recovery

Cooperative Optimization of System Parameters and Heat Exchanger Structure for Geothermal Organic Rankine Cycle

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Parametric Design and Off-Design Analysis of Organic Rankine Cycle (ORC) System

Optimizing Waste Heat Recovery with Organic Rankine Cycles: A Novel Graphical Approach Based on Exergy-Enthalpy Diagrams

1-D Model Analysis Of Tesla Turbine For Small Scale Organic Rankine Cycle (Orc) System

Influence of the Radial-Inflow Turbine Efficiency Prediction on the Design and Analysis of the Organic Rankine Cycle (ORC) System

Analysis of the Thermodynamic Performance Limits of the Organic Rankine Cycle in Low and Medium Temperature Heat Source Applications

Thermodynamic Analysis of A Low-Temperature Organic Rankine Cycle Power Plant Operating at Off-Design Conditions

Investigation of the Organic Rankine Cycle (ORC) System and the Radial-Inflow Turbine Design

Thermodynamic analyses and experimental investigations on the net efficiency of a small‐scale organic Rankine cycle prototype

Design and study of Organic Rankine Cycle (ORC) and turbine for ORC

Thermal performance analysis of a biomass-fired organic rankine cycle

Thermodynamic analysis of working fluids: What is the highest performance of the sub- and trans-critical organic Rankine cycles?

Organic Rankine cycle performance evaluation and thermoeconomic assessment with various applications part I: Energy and exergy performance evaluation

Thermodynamic performance limits of the organic Rankine cycle: Working fluid parameterization based on corresponding states modeling

Performance Analyses of Transcritical Organic Rankine Cycles with Large Variations of the Thermophysical Properties in the Pseudocritical Region

Systematic Fluid Selection for Organic Rankine Cycles and Performance Analysis for a Combined High and Low Temperature Cycle

The Influence of Working Fluid Characteristic Parameters on Turbine Performance for the Small Scale ORC System