Investigation on pressure-swirl atomization for cooling and efficiency improvement of photovoltaic module
Runze Duan,Jiabao Du,Qingfei Fu,Yuanhe Yue,Teng Liu,Liansheng Liu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122720
IF: 6.4
2024-02-24
Applied Thermal Engineering
Abstract:Photoelectricity has emerged as a swiftly advancing renewable energy source on a global scale. Despite this progress, enhancing the electricity generation efficiency photovoltaic systems remains a pressing concern. This concern becomes especially pronounced during hot summer periods when the rise in temperature within the photovoltaic module can precipitate a decline in the overall efficiency of photovoltaic electricity generation. An efficient cooling system holds great potential in lowering the temperature and enhancing the electricity generation efficiency of photovoltaic modules. In this study, a small flow pressure-swirl atomizer was employed to achieve cooling for a photovoltaic module, and a dedicated experimental setup was constructed to facilitate spray cooling of the photovoltaic module. Initially, the effect of the atomizer on the spray cone angle, flow rate, droplet size, and velocity were explored across various aperture sizes and pressures, in order to elucidate the spray characteristics. Subsequently, the atomizer was utilized to cool the photovoltaic modules, and the effects of atomizers with varying aperture sizes and pressures on the cooling effect and electricity generation efficiency of the photovoltaic module were examined. The obtained results demonstrated that the utilization of an atomizer for module cooling can effectively lower the operational temperature, thereby improving both the electricity generation efficiency and net power output. Specifically, the electricity generation efficiency increase ratio and net output power increase ratio exhibited a maximum increase of 10.52% and 6.57%, respectively, while simultaneously reducing the net cost by 6.76%. Consequently, this research has unveiled a practical and cost-effective method for temperature regulation in photovoltaic modules, potentially presenting a significant advancement for the photovoltaic industry.
energy & fuels,engineering, mechanical,thermodynamics,mechanics