Abstract:A specific columnar crystal structure is obtained using the directional solidification technique, which has a substantial effect on the optimization of the axial mechanical properties of the alloy. Additionally, the convection phenomenon in the melt changes the temperature field and concentration field at the front of the solid–liquid interface, affecting the shape of this interface. Thus, the influence on alloy properties cannot be ignored. Although the phase field method has more research on the microdendrite growth morphology, the results of coupling the flow field into the phase field and exploring the microdendrite morphology of directional solidification are still scarce. In this paper, the phase field model of a coupled flow field is used to simulate dendritic growth during directional solidification. The effects of the anisotropy coefficient and interfacial energy on the growth of directionally solidified dendrites and the growth behavior of dendrites under forced convection were studied. For the numerical solution procedure, a uniform grid of the finite difference method was used to discretize the governing equations. A combined solution of the MAC algorithm and a phase field discrete calculation was realized. When addressing the coupling of the microvelocity and pressure fields, the MAC algorithm was used to solve the Navier–Stokes equation and pressure Poisson equation, and the interlocked grid method was applied to handle the complex free interface. The results show that the growth rate of the dendrite tip increases, and the radius of curvature and the solute concentration at the root of the dendrite decrease with an increasing anisotropy coefficient. When the anisotropy coefficient is a maximum of 0.065, the wall of the dendrite tends to develop toward a secondary dendrite because of the influence of the anisotropy coefficient; with increasing interfacial energy, the radius of curvature of the dendrite tip increases. When the interfacial energy is a maximum of 0.6 J·m−2, the solidification shows a flat interface advancing mode; forced convection has a great influence on the growth direction of directional solidification dendrites. The directional solidification of dendrites in the upstream direction is coarse and grows faster with increasing flow rate. Additionally, the dendrite growth morphology observed using an optical microscope agrees well with the experimental results.

Phase-field Study of the Effects of the Multi-Controlling Parameters on Columnar Dendrite During Directional Solidification in Hexagonal Materials.

Orientation Dependence of Columnar Dendritic Growth with Sidebranching Behaviors in Directional Solidification: Insights from Phase-Field Simulations

Phase-field Simulation of Tilted Growth of Dendritic Arrays During Directional Solidification

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process

Phase Field Method Study on the Directional Solidification Microstructure of a Fe-C Alloy under Forced Convection

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Influence of Anisotropy on Dendritic Growth in Binary Alloy with Phase–Field Simulation

Phase-Field Simulation Studies of Multiple Grains Coupled with Force Flow Field

Tilted Dendritic Growth Dynamics and Dendrite to Degenerate Seaweed Transition in Directional Solidification: Insights from Phase-Field Simulations

Quantitative Multi-Phase-field Modeling of Non-Isothermal Solidification in Hexagonal Multicomponent Alloys

Phase field modeling the selection mechanism of primary dendritic spacing in directional solidification

Stability Range of Tilted Dendritic Arrays During Directional Solidification

Impact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase-Field Method

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

The growth direction selection of inclined dendrites induced by solute interaction: A phase-field study

Multi-scale Simulation of Dendrite Growth for Direct Energy Deposition of Nickel-Based Superalloys

Phase-field Simulation of Influence of Anisotropy on Process of Non-Isothermal Solidification

Growth Direction Selection of Tilted Dendritic Arrays in Directional Solidification over a Wide Range of Pulling Velocity: A Phase-Field Study

Phase-field study of competitive dendritic growth of converging grains during directional solidification

Phase Field Simulation of Dendrite Sidebranching During Directional Solidification of Al-Si Alloy