Abstract:Turbocompounding is a promising waste heat recovery technology to improve fuel economy of internal combustion engines and comply with increasingly stringent emission regulations. The performance of a turbocompound engine is significantly influenced by the matching of the turbocharger turbine and the power turbine. Conventionally, the matching of the turbocharger turbine and power turbine is carried out at a single operating point. Single-point matched turbocompound systems tends to have poor performance at off-design operating conditions, which restrained the fuel-saving potential of turbocompound engines under driving cycle conditions.In the present study, a multipoint matching method for turbocompound systems was developed, which was essentially an optimization process of the swallowing capacities of the turbocharger turbine and the power turbine to achieve best performance at multiple matching points. In order to improve the performance of turbocompound engines under driving cycle conditions, common operating points of a driving cycle were used as matching points in the matching process. Common operating points under a driving cycle were determined by clustering the dynamic profiles of the driving cycle.A simulation study was carried out to examine the effectiveness of the multipoint matching method. The performance of the multipoint matched turbo compound system was compared against two single-point matched turbocompound systems under stationary operating points and driving cycle conditions respectively. According to the simulation results, the multipoint matched turbocompound system could attain satisfactory BSFC benefit under a wider operating range when compared with the two single-point matched turbocompound systems. The multipoint matched turbocompound engine showed the largest reduction in fuel consumption under driving cycle conditions.

Development of A Multipoint Matching Method for Turbocompound Systems

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Study on Turbocompound System for a Heavy-Duty Diesel Engine by Combining Matching Analysis with Experiments

Study on Mixed Pulse Converter (mixpc) Turbocharging System and Its Application in Marine Diesel Engines

Through Flow Matching of Power Turbine for a Turbo-Compounded Diesel Engine

Numerical Simulation on Operating Characteristics of Hybrid Compressed-air and Fuel Engine

Pre-matching study of the natural gas engine turbocharging system based on the coupling of experiments and numerical simulation

Performance Prediction of Water Powered Turbo Blower Based on Multi Field Coupling

A Matching Method for Two-Stage Turbocharging System

A Method for Matching Two-Stage Turbocharger System and Its Influence on Engine Performance

Power Matching Method of Parallel Hybrid Excavator

Study of a Hybrid Pneumatic-Combustion Engine under Steady-State and Transient Conditions for Transport Application

Design Method of the Matching Network for Fuel Cell Generations

Experimental study on the performance of a turbocompound diesel engine with variable geometry turbocharger

Parametric Study of A Turbocompound Diesel Engine Based on an Analytical Model

Numerical Study on Steam Injection in a Turbocompound Diesel Engine for Waste Heat Recovery

Computational Study on Compressor-Combustor Interactions for Improved Matching of a Micro Gas Turbine

Engine performance improvements through turbocharger matching and turbine design

Study of Two-Stage Turbine Characteristic and Its Influence on Turbo-Compound Engine Performance

Equivalent Model-Based Optimal Matching for Two-Stage Turbocharging Systems with Bypass Valves

Compressor Design For Multi-Point Operating Conditions Of Turbocharged Gasoline Engines