Abstract:The demand for high energy density in lithium-ion battery packs for electric vehicles poses a challenge to maintaining its optimum operating temperature while reducing the risk of thermal runaway (TR) propagation. This study proposes a novel hybrid TR propagation mitigation system that balances heat transfer and thermal insulation requirements using low and high thermal conductivity phase change materials (PCM), heat pipes (HP), and air-cooling. The design and optimization of such a mitigation system are complex due to the many design parameters involved. The Adaptive-Kriging-High dimensional model representation (Adaptive-Kriging-HDMR) is used to establish a surrogate model of the system, and the sensitivity of the system's design parameters is evaluated with the maximum battery temperature and the system weight as the targets, thereby improving the efficiency of model calculation and reducing the dimension of optimization parameters. Then, the design of the sensitive parameters is optimized using an extended elitist non‐dominated sorting genetic algorithm (E-NSGA-II) multi-objective optimization algorithm. The results show that the modeling difficulty and optimization calculation time are significantly reduced by using a surrogate model. The calculation time for a single surrogate model only takes a few seconds instead of several hours for the original three-dimensional heat transfer and flow calculation. The thermal conductivity of high thermal conductivity-PCM, the distance between battery and low thermal conductivity-PCM, the battery spacing, and the HP length significantly affect the system. The optimized system substantially reduces the overall weight of the battery system while ensuring its good heat dissipation capability. In the case of TR in a single battery, the system succeeds in limiting the TR propagation to the same row, with the maximum battery temperature in the second row being only 64.3 °C, well below the battery TR trigger point. Under more severe conditions, such as TR occurring in two batteries simultaneously, the maximum battery temperature in the second row is 155.5 °C, and no TR spreads to the adjacent row. This study provides a rapid and effective method for designing a TR propagation mitigation system. It can serve as a reference for the engineering design and optimization of battery thermal management systems.

Experimental investigation on the feasibility of heat pipe-based thermal management system to prevent thermal runaway propagation

Numerical Study on the Use of Emergency Cooling During the Process of Lithium-Ion Battery Thermal Runaway

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

Thermal runaway propagation characteristics and preventing strategies under dynamic thermal transfer conditions for lithium-ion battery modules

Numerical and Experimental Investigation on the Performance of Battery Thermal Management System Based on Micro Heat Pipe Array

Mitigation strategy for Li-ion battery module thermal runaway propagation triggered by overcharging

A practical method of developing cooling control strategy for thermal runaway propagation prevention in lithium ion battery modules

Experimental Investigation of Thermal Runaway Propagation in a Lithium-Ion Battery Pack: Effects of State of Charge and Coolant Flow Rate

The retarding effect of liquid-cooling thermal management on thermal runaway propagation in lithium-ion batteries

Numerical investigation of thermal runaway mitigation through a passive thermal management system

Investigating Thermal Runaway Propagation Characteristics and Configuration Optimization of the Hybrid Lithium-Ion Battery Packs

A Novel Hybrid Battery Thermal Management System for Prevention of Thermal Runaway Propagation

Hybrid cooling system with phase change material and liquid microchannels to prevent thermal runaway propagation within lithium-ion battery packs

Experimental and simulation investigation of thermal runaway propagation in lithium-ion battery pack systems

A numerical study on the performance of a thermal management system for a battery pack with cylindrical cells based on heat pipes

Numerical Analysis of Heat-Pipe-Based Battery Thermal Management System for Prismatic Lithium-Ion Batteries

Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack

Honeycomb-inspired design of a thermal management module and its mitigation effect on thermal runaway propagation

Thermal management performance and optimization of a novel system combining heat pipe and composite fin for prismatic lithium-ion batteries

Optimization design of a hybrid thermal runaway propagation mitigation system for power battery module using high-dimensional surrogate models