Abstract:Kinematic model predictive control (MPC) is well known for its simplicity and computational efficiency for path tracking of autonomous vehicles, however, it merely works well at low speed. In addition, earlier studies have demonstrated that tracking accuracy is improved by the feedback of yaw rate, as it improves the system transients. With this in mind, it is expected that the performance of path tracking can be improved by a cascaded controller that utilizes kinematic MPC to determine desired yaw rate rather than steering angle, and uses proportional-integral-derivative (PID) control to follow the reference yaw rate. However, directly combining MPC with PID feedback control of yaw rate results in a controller with poor tracking accuracy. The simulation results show that the cascaded MPC-PID controller has relatively stable but larger error compared to classic kinematic and dynamic MPC. Based on the analysis of vehicle sideslip angle, a novel path tracking control method is proposed, which is designed using a kinematic MPC to handle the disturbances on road curvature, a PID feedback control of yaw rate to reject uncertainties and modeling errors, and a vehicle sideslip angle compensator to correct the kinematic model prediction. The proposed controller performances involving steady-state and transient response, robustness, and computing efficiency were evaluated on Carsim/Matlab joint simulation environment. Furthermore, field experiments were conducted to validate the robustness against sensor disturbances and time lag. The results demonstrate that the developed vehicle sideslip compensator is sufficient to capture steer dynamics, and the developed controller significantly improves the performance of path tracking and follows the desired path very well, ranging from low speed to high speed even at the limits of handling.

Acceleration tracking control of Stop and Go cruise control systems

Longitudinal acceleration tracking control of vehicular stop-and-go cruise control system

Longitudinal Acceleration Tracking Control of Low Speed Heavy-Duty Vehicles

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

A Fast Integral Sliding Mode Controller with an Extended State Observer for Position Control of Permanent Magnet Synchronous Motor Servo Systems

Vehicle Adaptive Cruise Control Design with Optimal Switching Between Throttle and Brake

Model Predictive Multi-Objective Vehicular Adaptive Cruise Control

Adaptive Cruise System Based on Fuzzy MPC and Machine Learning State Observer

An Improved Kinematic Model Predictive Control for High-Speed Path Tracking of Autonomous Vehicles

Path Tracking Control of High-Speed Intelligent Vehicles Considering Model Mismatch

Nonlinear disturbance decoupling control of heavy-duty truck stop and go cruise system

Cooperative Adaptive Cruise Control Using Delay-Based Spacing Policy: A Robust Adaptive Non-Singular Terminal Sliding Mode Approach

Smooth Robust Adaptive Sliding Mode Control of Manipulators With Guaranteed Transient Performance

Multiple-Objective Adaptive Cruise Control System Integrated with DYC.

Multi-objective Coordinated Control for Advanced Adaptive Cruise Control System

Adaptive cruise control method based on hierarchical control and multi-objective optimization

Cooperative adaptive cruise control system with improved variable spacing strategy

Sliding mode coordinated control of hybrid electric vehicle via finite-time control technique

Adaptive Discrete Second Order Sliding Mode Control with Application to Nonlinear Automotive Systems

A Hierarchical Control Scheme for Adaptive Cruise Control System Based on Model Predictive Control

Disturbance Decoupling Robust Control of Vehicle Full Speed Cruise Dynamic System