Abstract:This work proposes an innovative integrated process to produce clean solid biofuel from chlorinated wastes and polyvinyl chloride (PVC). The PVC and pinewood sawdust were used as parent materials. We studied the effect of parameters such as the hydrothermal temperature, the residence time and the particle size (PS) of the sawdust on the dechlorination efficiency (DE), the inorganics removal efficiency (RE), and the HHV of hydrochar. The co-hydrothermal carbonization (Co-HTC) process was performed by mixing the PVC and pinewood sawdust at a mass ratio of 1:9. For the DE, the most important factor was the hydrothermal temperature, followed by residence time and particle size of pine sawdust. The DE could reach about 84% by the co-HTC at a temperature of 260 degrees C for 120 min. The particle size of pine sawdust has noticeable effect on DE because of heat and mass transfer. The DE was decreased from 79.17% to 71.12% when the PS was increased from 0.22-0.49 to 0.6-0.9 mm. The RE of inorganics from pine sawdust was significantly promoted because the addition of PVC enhanced the acidity of the reaction system, regardless of the co-HTC operating parameters investigated in this work. The temperature increase is conducive for the removal of K and Na. The maximal RE of Al, Ca, and Mg increased significantly from 49.39%, 49.19% and 41.86 to 97.61% (D-a-260-30), 98.59% (D-a-260-90) and 97.66% (D-c-260-30), respectively. The maximal RE of Fe, K and Na increased from 49.79%, 50.80% and 47.44% to 92.82% (D-a-220-30), 92.32% (D-c-260-30) and 87.43% (D-c-260-30), respectively. The oxygen-containing functional groups decreased with the increase of HTC temperature (220-260 degrees C), residence time (30-90 min) and particle size (0.22-0.49 to 0.6-0.9 mm), resulting in the weakening absorption ability of hydrochar for inorganics. The addition of PVC and the temperature increase are not conducive to the formation of porous hydrochar. Nevertheless, the residence time extension and particle size growth could increase the porosity of hydrochar. The hydrochar with low chlorine, low inorganics content and improved higher heating value (HHV) of 24-30 MJ/kg was similar to bituminous coal, which could be utilized as clean solid biofuels. A high-energy yield of 74-81% was achieved by this co-HTC process. These results show that the co-HTC of PVC with biomass was feasible for clean biofuel production, because the chlorine and inorganics could be removed effectively by the positive synergistic effect. This work provides a new viewpoint for the development of WtE and biomass upgrading technologies.

Co-hydrothermal Carbonization of Water Hyacinth and Polyvinyl Chloride: Optimization of Process Parameters and Characterization of Hydrochar.

Co-hydrothermal Carbonization of Polyvinyl Chloride and Corncob for Clean Solid Fuel Production.

Co-hydrothermal Carbonization of Lignocellulosic Biomass and Waste Polyvinyl Chloride for High-Quality Solid Fuel Production: Hydrochar Properties and Its Combustion and Pyrolysis Behaviors.

Co-hydrothermal Carbonization of Water Hyacinth and Sewage Sludge: Effects of Aqueous Phase Recirculation on the Characteristics of Hydrochar

Conversion of Water Hyacinth to Value-Added Fuel Via Hydrothermal Carbonization

Co-hydrothermal Carbonization of Polyvinyl Chloride and Moist Biomass to Remove Chlorine and Inorganics for Clean Fuel Production

Co-hydrothermal Carbonization of Sewage Sludge and Polyvinyl Chloride: Hydrochar Properties and Fate of Chlorine and Heavy Metals

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Characteristics of Co-Hydrothermal Carbonization on Polyvinyl Chloride Wastes with Bamboo.

Co-hydrothermal Carbonization of Polyvinyl Chloride and Pyrolysis Carbon Black for the Preparation of Clean Solid Fuels

Fate of sodium and chlorine during the co-hydrothermal carbonization of high-alkali coal and polyvinyl chloride

Hydrothermal Carbonization of Sewage Sludge with Sawdust and Corn Stalk: Optimization of Process Parameters and Characterization of Hydrochar

Insights into PVC-promoted hydrothermal carbonization of manure: Dechlorination, inorganic metals removal, and combustion behaviors

Co-hydrothermal carbonization of lignocellulosic biomass and swine manure: Optimal parameters for enhanced nutrient reclamation, carbon sequestration, and heavy metals passivation

Co -hydrothermal carbonization of polyvinyl chloride and lignocellulose biomasses: Influence of biomass feedstock on fuel properties and combustion behaviors

Combustion and Slagging Characteristics of Hydrochar Derived from the Co-Hydrothermal Carbonization of PVC and Alkali Coal

A review on hydrothermal carbonization of biomass and plastic wastes to energy products

Co-hydrothermal carbonization of sewage sludge and rice straw to improve hydrochar quality: Effects of mixing ratio and hydrothermal temperature

Upgradation of Coconut Waste Shell to Value-Added Hydrochar Via Hydrothermal Carbonization: Parametric Optimization Using Response Surface Methodology

Effects of Process Water Recirculation on Yields and Quality of Hydrochar from Hydrothermal Carbonization Process of Rice Husk

Physiochemical, Structural and Combustion Properties of Hydrochar Obtained by Hydrothermal Carbonization of Waste Polyvinyl Chloride