Abstract:Build-up/wash-off models were originally developed for small-scale laboratory facilities with uniform properties. The effective translation of these models to catchment scale necessitates the meticulous calibration of model parameters. The present study combines the Mat-SWMM tool with a genetic algorithm (GA) to improve the calibration of build-up and wash-off parameters. For this purpose, Mat-SWMM was modified to equip it with the capacity to provide comprehensive water quality analysis outcomes. Additionally, this research also conducts a comparative examination of two distinct types of objective functions in the optimization. Rather than depending on previous literature, this study undertook a numerical campaign to ascertain an appropriate range for the relevant parameters within the case study, thereby ensuring the optimization algorithm's efficient functionality. This research also implements an integrated event calibration approach, i.e., a novel method that calibrates all rainfall events collectively, thus improving systemic interaction representation and model robustness. The findings indicate that employing this methodology significantly enhances the reliability of the outcomes, thereby establishing a more robust procedure. The first objective function (TSS instantaneous less squared difference function, OF 1), which is widely employed in the literature, was designed to minimize the difference between observed and predicted instantaneous Total Suspended Solids (TSS) concentrations. In contrast, the second function (mass and mass peak consistency function, OF 2) considers integral model outputs, i.e., the overall mass balance, the time of the peak mass flow rate, and its intensity. The analysis of the outputs revealed that both objective functions demonstrated sufficient performance. OF 1 provided slightly better performance in predicting the TSS concentrations, whereas OF 2 demonstrated superior ability in capturing global event characteristics. Notably, the optimal parameter set identified through OF 2 aligned with the physically plausible ranges traditionally recommended in technical manuals for urban catchments. In contrast, OF 1's optimal set necessitated an expansion in the acceptable parameter ranges. Finally, from a computational burden viewpoint, OF 1 demanded a significantly higher number of function evaluations, thus implying an escalating computational cost as the range expands. Conversely, OF 2 necessitated fewer evaluations to converge toward the optimal solution.

Progress on appliacction of storm water management model

Sensitivity Analysis of Parameters of Storm Water Management Model with Sobol Method

Storm Water Management Model: Performance Review and Gap Analysis.

Introduction of basic principle and application prospect for SWMM

The Application of Storm Water Management Model in Comprehensive Planning of Urban Drainage and Flood Control

Simulations of low impact development designs using the storm water management model

Parameter Identification and Validation of SWMM in Simulation of Impervious Urban Land Surface Runoff

Watershed water environment pollution models and their applications: a review]

Urban Pluvial Flood Modeling by Coupling Raster-Based Two-Dimensional Hydrodynamic Model and SWMM

Modelling Low Impact Development in Watersheds Using the Storm Water Management Model

Coupling a Distributed Time Variant Gain Model into a Storm Water Management Model to Simulate Runoffs in a Sponge City

Simulation of Urban Rainstorm Waterlogging and Pipeline Network Drainage Process Based on SWMM

New optimization strategies for SWMM modeling of stormwater quality applications in urban area

Impact and analysis of urban water system connectivity project on regional water environment based on Storm Water Management Model (SWMM)

Analysis of pollutant dispersion patterns in rivers under different rainfall based on an integrated water-land model

A review of pesticide fate and transport simulation at watershed level using SWAT: Current status and research concerns

A Framework for Quantifying Stormwater Control Measures' Hydrologic Performance with Analytical Stochastic Models

Development and Application of a Physically-Based Distributed Rainfall-Runoff Model

Development and Testing of a Simple Physically-Based Distributed Rainfall-Runoff Model for Storm Runoff Simulation in Humid Forested Basins

Research Progress on SWAT Model and Its Application on Water Environmental Nonpoint Source Pollution

Advances in Non-Point Source Pollution Modelling with SWAT