Numerical correction of image distortion in CGH display based on automatic calibration algorithm

He,Zehao,Cao,Liangcai,Jin,Guofan

DOI: https://doi.org/10.1364/3d.2018.3m2g.5

2018-01-01

Abstract:A numerical correction method of image distortion for computer generated holography (CGH) display is proposed. A camera-based wavefront sensing system is proposed with the designed CGH testing images. The automatic pre-calibration algorithm is developed.

What problem does this paper attempt to address?

Image-Distortion Correction Algorithm for Computer-Generated Holographic Display

Xiaomeng Sui,Guofan Jin,Liangcai Cao,Zehao He

DOI: https://doi.org/10.1109/ISIE.2018.8433610

2018-06-01

Abstract:Current computer generated holography (CGH) display often suffers from an inevitable problem that the quality of the reconstructed images is often declined by distortions. Improving reconstruction quality by optimizing optical elements used in CGH display is costly and time-consuming. In this work, a numerical correction method of image distortion for CGH display is proposed. CGHs of designed testing charts are employed for pre-calibration. A camera-based wavefront acquisition system is employed for sensing the distorted reconstruction wavefront. An automatic pre-calibration algorithm is developed to reduce the distortion. Root mean square error of the reconstructed images after calibration could be dramatically reduced by the proposed algorithm.

Physics,Computer Science,Engineering
Reduction on the Reconstruction Error of Computer-generated Holography in Liquid Crystal Panels

CHEN Xiaoxi,Liu Xu,Zhang Xiaojie

DOI: https://doi.org/10.3321/j.issn:0254-3087.2004.z2.039

2004-01-01

Abstract:A new algorithm for calculating computer-generated holograms (CGH's) is proposed. The hologram fringe pattern data is stored in the computer image format, and transmitted to a transmission-type liquid crystal panel by the video signal. It will be used for the real-time three-dimension imaging by holographic reconstruction. Questions of the effect of the solution, the contrast ratio of the liquid crystal panel and the modulation due to the gray-level of the hologram image are addressed. Therefore the distribution of the amplitude and phase on the holographic plane is determinated by confirming image plane distribution considering the above effects. The reconstructed data is made as similar as possible to the source data by the optimal code. Experimental results,and value the quality of the reconstructed image are given.
Unified Optical Distortion Correction Method for Imaging Systems Using A Concise Geometrical Transformation Model

Shengqian Chang,Siqi Liu,Fei Yuan,Zhenrong Zheng

DOI: https://doi.org/10.1016/j.optcom.2016.08.069

IF: 2.4

2017-01-01

Optics Communications

Abstract:Since optical distortion has been a big trouble for various kinds of imaging systems, finding a simple correction method with wide applications is of significant importance. In this paper, we propose a unified and simple correction method, performing well for both photographic and projective imaging systems. The basic idea is regarding the optical distortion as geometrical deformation between the object and image, without considering the specific features of an optical system. First of all, a calibration template is employed to establish the geometrical transformation model (GTM) for the distortion of a built optical system. Two alternative algorithms are given to estimate the GTM in algebraic form. The computation is very simple because no intrinsic parameters of the optical system are needed to establish the GTM. Besides, the errors introduced by the fabricating and assembling process can be eliminated. Then, the corrected image of the photographic system or the pre-distorted image of the projective systems can be obtained accordingly utilizing the GTM. Experiments are conducted to demonstrate the effectiveness of our method with wide applications.
Reduction In The Reconstruction Error Of Computer-Generated Holograms In Liquid Crystal Panels

Xiaoxi Chen,Xü Liu,Xiaojie Zhang

DOI: https://doi.org/10.1117/12.575588

2005-01-01

Abstract:In this paper the research of the real-time three-dimensional holographic imaging system which uses liquid crystal panels to display the computer generated Fresnel holograms for reconstructed 3D images is described. The reconstructed effects are related to each step of the process and the characteristics of the devices. The contradictions between the quantization of holographic numerical data and the properties of the display device are the important reasons for the reconstruction errors. A new algorithm for calculating point holograms is proposed for reducing the reconstruction errors. Finally the original experimental result is given.
Study of CGH for 3D Image Using Fresnel Zone

张晓洁,刘旭,陈晓西

DOI: https://doi.org/10.3969/j.issn.1003-501x.2004.12.016

2004-01-01

Abstract:A numerical method for producing Fresnel computer generated hologram(CGH) of a 3D image using master Fresnel zone according to holographic theory is described in this paper. By reading 3DS files, the information of spatial position of various point on the surface of the three-dimentional object can be obtained directly. According to calculated Fresnel pattern from simulating physical hologram, the Fresnel zones that compose the points of three-dimentional object was superimposed. Consequently, the hologram of the three-dimentional object can be obtained. Compared to traditional holographic computation, this algorithm improves computational efficiency greatly using addition instead of exponent and multiply operation, and has the advantages of information continuum and no redundant data. To a digital object composed of 1060 points, it takes about 83s to generate a hologram of 1024×768 pixles.
Distortion-Correction Method Based on Angular Spectrum Algorithm for Holographic Display

Zehao He,Xiaomeng Sui,Guofan Jin,Liangcai Cao

DOI: https://doi.org/10.1109/tii.2019.2906642

IF: 12.3

2019-01-01

IEEE Transactions on Industrial Informatics

Abstract:The reconstruction quality of computer-generated holographic display is subject to distortions, which are caused by manufacture defects and misalignments of optical elements. Distortion correction based on precision optics is costly and time-consuming. In this paper, a numerical distortion-correction method based on the angular spectrum algorithm is proposed. A wavefront acquisition system using a camera and the four-step phase-shifting algorithm is employed for calculating the distorted distributions. A wavefront correction system using the spatial light modulator is developed for eliminating distorted distributions. Effective distance, calculation time and iterations, and limitations of the method are discussed. The proposed method is robust in reducing distortions in computer-generated holographic display.
Phase-Contrast Imaging Technology with Digital Holographic Microscope Based System Calibration

潘卫清 Pan Weiqing,朱勇建 Zhu Yongjian,郎海涛 Lang Haitao

DOI: https://doi.org/10.3788/CJL20103707.1812

2010-01-01

Abstract:A phase-contrast imaging technology with digital holographic microscope based on system calibration is present. After a theoretical analysis of the phase-contrast microscopy, results show that the phase curvature introduced by the microscope objectives can be compensated by introducing two digital phase masks located on recording plane and imaging plane respectively. Without affecting the sice of the reconstructed image, the mathematic models of the two phase masks are defined, which can be constructed by the proposed system calibration method. The calibration process includes pre-recording two reference holograms, inserting the imaging microscope objective, filtering and square fitting etc digital processing to compute the recording system parameters, constructing the required digital phase masks by the calibrated system parameters. Finally, a demonstration experiment is carried out. In the experiment a small water bead with size of no more than 0.09 mm is phase-contrast imaged with different magnification ratios. The experiment shows that the proposed method is credible and convenient.
Computer-generated holographic near-eye display system based on LCoS phase only modulator

Peng Sun,Shengqian Chang,Siman Zhang,Ting Xie,Huaye Li,Siqi Liu,Chang Wang,Xiao Tao,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2271730

2017-01-01

Abstract:Augmented reality (AR) technology has been applied in various areas, such as large-scale manufacturing, national defense, healthcare, movie and mass media and so on. An important way to realize AR display is using computer-generated hologram (CGH), which is accompanied by low image quality and heavy computing defects. Meanwhile, the diffraction of Liquid Crystal on Silicon (LCoS) has a negative effect on image quality. In this paper, a modified algorithm based on traditional Gerchberg-Saxton (GS) algorithm was proposed to improve the image quality, and new method to establish experimental system was used to broaden field of view (FOV). In the experiment, undesired zero-order diffracted light was eliminated and high definition 2D image was acquired with FOV broadened to 36.1 degree. We have also done some pilot research in 3D reconstruction with tomography algorithm based on Fresnel diffraction. With the same experimental system, experimental results demonstrate the feasibility of 3D reconstruction. These modifications are effective and efficient, and may provide a better solution in AR realization.
Holographic near-eye display system based on double-convergence light Gerchberg-Saxton algorithm.

Peng Sun,Shengqian Chang,Siqi Liu,Xiao Tao,Chang Wang,Zhenrong Zheng

DOI: https://doi.org/10.1364/OE.26.010140

IF: 3.8

2018-01-01

Optics Express

Abstract:In this paper. a method is proposed to implement noises reduced three-dimensional (3D) holographic near-eye display by phase-only computer-generated hologram (CGH). The CGH is calculated from a double-convergence light Gerchberg-Saxton (GS) algorithm, in which the phases of two virtual convergence lights are introduced into GS algorithm simultaneously. The first phase of convergence light is a replacement of random phase as the iterative initial value and the second phase of convergence light will modulate the phase distribution calculated by GS algorithm. Both simulations and experiments are carried out to verify the feasibility of the proposed method. The results indicate that this method can effectively reduce the noises in the reconstruction. Field of view (FOV) of the reconstructed image reaches 40 degrees and experimental light path in the 4-f system is shortened. As for 3D experiments, the results demonstrate that the proposed algorithm can present 3D images with 180cm zooming range and continuous depth cues. This method may provide a promising solution in future 3D augmented reality (AR) realization. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Image Distortion Correction Algorithm of Large-FOV Display Device

Wen Yong-qiang

Abstract:The image may deform seriously in large-FOV display devices due to distortion.Appropriate correction method was chosen and optimized based on the distortion characteristics to avoid distortion in the final imaging.The methods of symmetrical transform and improved bilinear interpolation were proposed for pretreatment of image source to eliminate the adverse effects of the distortion.The comprehensive indexes for estimating the algorithm performance were presented.The correction algorithm was analyzed by simulation with Matlab and VC++ 6.0,and the experimental result shows that this optimized method can improve the veracity of distortion correction as well as the real-time performance.

Computer Science,Mathematics,Engineering
Accurate Calculation of Computer-Generated Holograms Using Angular-Spectrum Layer-Oriented Method.

Yan Zhao,Liangcai Cao,Hao Zhang,Dezhao Kong,Guofan Jin

DOI: https://doi.org/10.1364/oe.23.025440

IF: 3.8

2015-01-01

Optics Express

Abstract:Fast calculation and correct depth cue are crucial issues in the calculation of computer-generated hologram (CGH) for high quality three-dimensional (3-D) display. An angular-spectrum based algorithm for layer-oriented CGH is proposed. Angular spectra from each layer are synthesized as a layer-corresponded sub-hologram based on the fast Fourier transform without paraxial approximation. The proposed method can avoid the huge computational cost of the point-oriented method and yield accurate predictions of the whole diffracted field compared with other layer-oriented methods. CGHs of versatile formats of 3-D digital scenes, including computed tomography and 3-D digital models, are demonstrated with precise depth performance and advanced image quality.
Fish-eye image correction method and technique based on geometrical imaging model

LI Gen,FEI Zhang-jun,YANG Shi-you

2013-01-01

Abstract:Fish-eye lenses with wide field of view(FOV)are widely used in the field of large scene video surveillance,but nonlinear radial distortion of fish-eye image violated the human visual habits and brought inconvenience to measurement and pattern recognition applications. In order to correct the fish-eye images,a new correction method and technique based on geometrical imaging model that corrects the images form different types of fish- eye lens by corresponding geometrical imaging model was proposed. Also,the implementation method of equidistant imaging model was developed. Finally,the optimization methods based on the cache and a fast bilinear interpolation implementation ensuring the accuracy aiming at the real-time application were presented. The results indicate that the new method works efficiently in a larger scale,and easier to implement.
Fast computation method for CGH

CHEN Huirong,FU Shenghao,WANG Yuanqing,FAN Kefeng

DOI: https://doi.org/10.3778/j.issn.1002-8331.1303-0348

2013-01-01

Abstract:The generation speed of the Computer Generated Hologram(CGH)affects the application of holographic three-dimensional display technology.Hence,an effective and fast computation method is proposed.Through the analyzing of the traditional hologram,a lot of redundant information is found in it.The combination of spatial redundancy light wave removal algorithm and tracking of the human eyes methods determines the scope of sub-holograms.Furthermore,a method for sub-hologram that ranks contribution component is calculated by two-step algorithm is applied.Calculation of sub-hologram which ignores a large number of redundant data and application of two-step algorithm which removes redundant computation loosen the computational amount of CGH and thus increase the speed.The experimental results show that the algorithm is effective and the speed is accelerated about ten times by the two-step algorithm.
Geometry calibration for multi-projector display automatically based on the feedback of camera algorithm

Meihua Chen,Binwen Fan,Huanyu Song

DOI: https://doi.org/10.1109/FSKD.2014.6980897

2014-01-01

Abstract:An algorithm is proposed for automatic geometric correction based on feedback of camera for multi-projector display system to address the problems exist in interactive manual geometric correction. The method is implemented in two steps. The first step performs an approximate correction which does not involve manual interaction. This step establishes geometric relations involving the screen space, camera space, projector buffer space, the original image and the sub-image by using pre-defined correction parameters. A pre-distortion is conducted on the original image with respect to the three relations to ensure the geometric continuity of the output image. To ensure the accuracy and robustness of the geometrical correction process, we proposed the second step to perform a further, accurate correction. The experimental results show that the proposed method is able to perform geometric correction quickly and accurately and fulfill the requirements for application.
Generalized Single-Sideband Computer-Generated Holography For High-Quality Three-Dimensional Display

Xiaoyu Wang,Hao Zhang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1117/12.2537193

2019-01-01

Abstract:Computer-generated holograms (CGHs) can be used to reconstruct three-dimensional (3D) images without optical recording of the interference pattern. The conjugate image and zero-order beam have considerable influences on the optical reconstructions in computer-generated holographic display systems based on the amplitude spatial light modulators. Generalized single-sideband method is introduced for suppressing the unwanted terms in computer-generated holography. Computer-generated holograms are calculated based on frequency filtering of the object wave, which redistributes the diffraction wave in spatial frequency domain for spectrum filtering during optical reconstruction. When the object wave on the hologram plane of the 3D scene is calculated, the single-sideband filter is addressed numerically after Fourier transform of the object wave. The filtered object wave can be calculated by inverse Fourier transform of the spectrum, and then it can be coded into the amplitude CGH. Different with the overlapped spatial frequency of the unfiltered CGH, the spectrum distributions of the object wave and the conjugate wave are located in the different sides of the spatial frequency domain with help of the single-sideband filter. By placing a single-sideband filter in Fourier plane, the conjugate image and the zero-order beam can be blocked during optical reconstruction. Since the proposed method directly processes the complex amplitude distribution of the object wave, it could be applied to various 3D CGH algorithms. Numerical simulations and optical experiments demonstrate that the proposed method is generally effective for different kinds of CGH algorithms to reconstruct quality three-dimensional scenes that are free of conjugate image and zero-order beam.
Calibration and Distortion Correction Method of Line Scan Camera

Yao ZHU,Zhile WANG,Lei HE,Chenghao ZHOU

DOI: https://doi.org/10.3969/j.issn.1009-8518.2017.06.006

2017-01-01

Abstract:Line scan cameras are more and more widely used in measurement filed owning to their high resolution and high data-processing efficiency. However, optical distortion of the line scan camera can have direct impact on the accuracy of geometric position, and even results in a failure to image. In this paper, a method mapping data from one dimension to two dimension without changing the original ones is proposed to calibrate the line scan camera using the existing area-based calibration method. During the calibration, a new calibration pattern is used to correlate the world coordinate system and the image coordinate system. The digital image processing method is used to calibrate and correct the distortion of the optical lens, which basically eliminates the measurement error caused by the image deformation and effectively solves the problem of reducing the accuracy of geometric position due to the lens distortion.
Information Compressed and Transmitted and Reconstructed System of CGH with LOCO-I Image Processing and Fraunhofer Transforming Technique

Guanglin Yang,Eiji Shimizu

DOI: https://doi.org/10.1541/ieejeiss1987.120.11_1520

2000-01-01

Abstract:In this paper, the information compressed and transmitted and reconstructed software system (ICTRS) of Computer generated hologram (CGH) has been designed and established which can be widely applied by computer operators. This system structure can be applied to resolve the remote signal processing using the digital filter of CGH. It is a new system structure, and the size of image displayed is bigger (i.e., 7.11×7.11 (inc2)) In this system, LOCO-I image encoding technique and the image reconstruction technique using Fraunhofer transforming algorithm have been adapted. This processing method is a "lossless" or "near-lossless" compression algorithm whose compression ratio can be achieved to 1:5 (i.e., the compression ratio is 18.7806%), and the image of processed CGH can be effectively reconstructed by a computer. In experiments, we have mainly discussed and analyzed the amplitude and phase variation of CGH's pixels. In detail, we have explained why the image quality of processed CGH can be influenced by the pixel's amplitude and phase varied. The image quality of processed CGH has been compared with the image quality of original CGH, and the reconstructed image quality of processed CGH has been compared with the reconstructed image quality of original CGH in ICTRS. Finally, Compression ratio (R), Mean squared error (MSE) and Pear signal to noise ratio (PSNR) have been precisely calculated and analyzed to evaluate the reconstructed images quality of processed CGH and the image quality of processed CGH. The better compression and transmission and reconstruction algorithm model of CGH can be determined by the distortion measure. In this system, the image quality of processed CGH has been relatively improved. This method of processing CGH has been effectively verified by experiments.
Depth Compensating Calculation Method of Computer-Generated Holograms Using Symmetry and Similarity of Zone Plates

Hui Wei,Guanghong Gong,Ni Li

DOI: https://doi.org/10.1016/j.optcom.2017.05.013

IF: 2.4

2017-01-01

Optics Communications

Abstract:Computer-generated hologram (CGH) is a promising 3D display technology while it is challenged by heavy computation load and vast memory requirement. To solve these problems, a depth compensating CGH calculation method based on symmetry and similarity of zone plates is proposed and implemented on graphics processing unit (GPU). An improved LUT method is put forward to compute the distances between object points and hologram pixels in the XY direction. The concept of depth compensating factor is defined and used for calculating the holograms of points with different depth positions instead of layer-based methods. The proposed method is suitable for arbitrary sampling objects with lower memory usage and higher computational efficiency compared to other CGH methods. The effectiveness of the proposed method is validated by numerical and optical experiments.
Distortion Correction of a Quick Response Code Image

Xue Min Cheng,Qun Hao,Chao Zhang,Jian She Ma

DOI: https://doi.org/10.4028/www.scientific.net/amm.431.312

2013-01-01

Applied Mechanics and Materials

Abstract:Distortion typically occurs when images are captured from the surface of a cylindrical object. This problem is obvious in Quick Response (QR) code images, which necessitate distortion correction for subsequent information reading. Based on a detailed analysis of this distortion, we divided it into linear distortion along the generatrix direction and curl distortion perpendicular to the generatrix direction, and proposed a unified method to correct the distortion of both components. Experimental results are given to demonstrate the feasibility and applicability of the method.
Error Correction of Glass Mediums in High-Temperature Digital Image Correlation Deformation Measurement

Ren Ming-yang,Wang Li-zhong,Fu Bai-qiang,Chen Ren-hong,Wu Hong,Wang Yan-peng

DOI: https://doi.org/10.37188/co.2021-0144

IF: 1.1

2022-01-01

Chinese Optics

Abstract:In order to correct the measurement error caused by a glass medium in high-temperature deformation measurement, we take a glass medium as a part of the camera calibration model. Based on photogrammetry technology and digital image correlation, a binocular camera calibration method in a complex environment is proposed and applied to high-temperature deformation measurements. Firstly, aiming at the calibration difficulty caused by the poor image quality in complex environments, the camera imaging model with distortion correction is adopted to achieve binocular camera calibration by bundle adjustment camera calibration method, which improves the success rate and stability of calibration. Secondly, to solve the problem of low calibration accuracy of binocular cameras in complex environments, the influence of lens focal length, ambient light interference and the distance between glass and camera on the calibration results are analyzed, and the optimal calibration parameters are given, so that the calibration reprojection error is reduced from 0.832 pixels to 0.132 pixels. Finally, the measurement error of the calibration method with and without glass is compared by using the measurement environment with a glass medium, which proves that this method can greatly reduce the measurement error. The test results show that this method can effectively reduce the measurement error of a displacement field caused by glass medium in a high-temperature environment. The maximum decrease of measurement error of the displacement field in the X, Y and Z axes is 70.16%, 76.51% and 40.05%, respectively. The method in this paper can achieve high-precision camera calibration in complex environments, and has good calibration stability. It is an effective way of realizing accurate measurement of high-temperature deformation.

Numerical correction of image distortion in CGH display based on automatic calibration algorithm

Image-Distortion Correction Algorithm for Computer-Generated Holographic Display

Reduction on the Reconstruction Error of Computer-generated Holography in Liquid Crystal Panels

Unified Optical Distortion Correction Method for Imaging Systems Using A Concise Geometrical Transformation Model

Reduction In The Reconstruction Error Of Computer-Generated Holograms In Liquid Crystal Panels

Study of CGH for 3D Image Using Fresnel Zone

Distortion-Correction Method Based on Angular Spectrum Algorithm for Holographic Display

Phase-Contrast Imaging Technology with Digital Holographic Microscope Based System Calibration

Computer-generated holographic near-eye display system based on LCoS phase only modulator

Holographic near-eye display system based on double-convergence light Gerchberg-Saxton algorithm.

Image Distortion Correction Algorithm of Large-FOV Display Device

Accurate Calculation of Computer-Generated Holograms Using Angular-Spectrum Layer-Oriented Method.

Fish-eye image correction method and technique based on geometrical imaging model

Fast computation method for CGH

Geometry calibration for multi-projector display automatically based on the feedback of camera algorithm

Generalized Single-Sideband Computer-Generated Holography For High-Quality Three-Dimensional Display

Calibration and Distortion Correction Method of Line Scan Camera

Information Compressed and Transmitted and Reconstructed System of CGH with LOCO-I Image Processing and Fraunhofer Transforming Technique

Depth Compensating Calculation Method of Computer-Generated Holograms Using Symmetry and Similarity of Zone Plates

Distortion Correction of a Quick Response Code Image

Error Correction of Glass Mediums in High-Temperature Digital Image Correlation Deformation Measurement